Browse > Article
http://dx.doi.org/10.5228/KSPP.2005.14.2.139

Extru-Bending Process of Curved Product with Flanged Section by Asymmetric Shape of an Extrusion Billet  

Park D. Y. (부경대학교 대학원 기계공학과)
Yun S. H. (부경대학교 대학원 정밀기계공학과)
Park J. W. (부경대학교 대학원 정밀기계공학과)
Jin I. T. (부경대학교 기계공학과)
Publication Information
Transactions of Materials Processing / v.14, no.2, 2005 , pp. 139-144 More about this Journal
Abstract
It was investigated that curved aluminum products with 'ㄷ' section or with 'h' section could be bended during extrusion by the extru-bending process. In order to make bending at the exit section of die, the flow of billet inside die cavity was controlled by the shape of billet. As results of the analysis of $DEFORM^{™}-3D$, it was known that the bending phenomenon at the die exit can be happened by the asymmetric section of billet. And it was known by the experiment with plasticine or aluminum material that an symmetric product with 'c' channel section and the product with flanged 'h' section could be bended because of asymmetric shape of billet.
Keywords
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 박대윤, 진인태, 2004, 원형 도는 사각 단면을 가지는 알루미늄 곡관 튜브제품의 열 간 금속압출굽힘가공, 한국소성가공학회지, Vol. 13. No.8, pp. 663-670
2 N. R. Chitkara, K. F. Celik, 2001, Extrusion of non-symmetric T -shaped section, an analysis and some experiments, Int. J. Mech. Sci., Vol. 44, pp. 217-246   DOI   ScienceOn
3 김진훈, 진인태, 1998, 편심압출굽힘가공법에 의한 사각형 단면을 가진 중공 튜브제품의 U형굽힘가공에 관한 연구, 한국소성가공학회지,Vol7. No2, pp. 177-185
4 박대윤, 진인태, 2002, 열간금속 압출 굽힘기를 이용한 금속곡관의 압출굽힘가공에 관한 연구, 한국소성가공학회지, Vol. 11. No.3, pp. 262-268
5 J. S. Gunasekera, S. Hoshino, 1980, Analysis od Extrusion of Non-Circular Sectionthrough Shaped Dies, Analysis of CIRP, Vol. 29, pp. 141-145   DOI   ScienceOn
6 T. Sheppard, 1999, Extrusion of Aluminum Alloys, Kluwer Academic Publishers
7 Pradip K. Saha, 2000, Aluminum Extrusi-on Technology, ASM International