• Structural Engineering and Mechanics
• /
• 제9권4호
• /
• pp.375-382
• /
• 2000

Experimental investigation into the cyclic behaviour of sand plast brick masonry was performed on forty two square panels. The panels were subjected to cyclic uniaxial compression for two cases of loading: normal to bed joint and parallel to bed joint. Experimental data were used to plot the unloading-reloading curves for the entire range of the stress-strain curve. Mathematical expressions to predict the reloading and unloading stress-strain curves at various values of residual strain are proposed. A simple parabola and an exponential type formula are found adequate to model the unloading and reloading curves respectively. The models account for the potential effects of residual strain on these curves. Comparison of test results with the proposed mathematical expression shows good correspondence.

• Imaging Science in Dentistry
• /
• 제33권3호
• /
• pp.143-149
• /
• 2003

Purpose: To investigate the radiosensitivity of the normal human oral keratinocytes (NHOK), and the effect of irradiation on cell cycle and protein expression. Materials and Methods: To evaluate the radiosensitivity of NHOK, the number of colonies and cells were counted after irradiation and the SF2 (survival fraction at 2Gy) value, and the cell survival curve fitted on a linear-quadratic model were obtained. LDH analysis was carried out to evaluate the necrosis of NHOK at 1, 2, 3, and 4 days after 2, 10, and 20 Gy irradiation. Cell cycle arrest and the induction of apoptosis were analyzed using flow cytometry at 1, 2, 3, and 4 days after 2, 10, and 200y irradiation. Finally, proteins related cell cycle arrest and apoptosis were analysed by Western blot. Results: The number of survived cell was significantly decreased in a dose-dependent manner. The cell survival curve showed SF2, α, and β values to be 0.568, 0.209, and 0.020 respectively. At 200y irradiated cells showed higher optical density than the control group. After irradiation, apoptosis was not observed but G2 arrest was observed in the NHOK cells. 1 day after 10 Gy irradiation, the expression of p53 remained unchanged, the p2l/sup WAF1/Cipl/ increased and the mdm2 decreased. The expression of bax, bcl-2, cyclin B1, and cyclin D remained unchanged. Conclusion: These results indicate that NHOK responds to irradiation by G2 arrest, which is possibly mediated by the expression of p21/sup WAFl/Cipl/, and that cell necrosis occurs by high dose irradiation.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권7호
• /
• pp.2851-2855
• /
• 2015

Background: Recent reports have shown that nuclear enriched abundant transcript 1 (NEAT1), a long noncoding RNA (lncRNA), contributes to the precise control of gene expression and is related to several human malignancies. However, limited data are available on the expression and function of NEAT1 in lung cancer. The major objective of the current study was to profile the expression and clinicopathological significance of NEAT1 in non-small cell lung cancers (NSCLCs). Materials and Methods: NEAT1 expression in 125 NSCLC cases and paired adjacent non-cancer tissues was assessed by real-time quantitative reverse transcription-PCR (qRT-PCR). Relationships between NEAT1 and clinicopathological factors were also investigated. Results: The relative level of NEAT1 was $6.98{\pm}3.74$ in NSCLC tissues, significantly elevated as compared to that of the adjacent non-cancer lung tissues ($4.83{\pm}2.98$, p<0.001). The area under curve (AUC) of high expression of NEAT1 to diagnose NSCLC was 0.684 (95% CI: 0.619~0.750, p<0.001). NEAT1 expression was positively correlated with patient age (r=-2.007, p=0.047), lymphatic metastasis (r=-2.731, p=0.007), vascular invasion (r=-3.617, p=0.001) and clinical TNM stage (r=-4.134, p<0.001). Conclusions: This study indicates that NEAT1 might be associated with oncogenesis and progression in NSCLC, and suggests application in molecular targeted therapy.

• BMB Reports
• /
• 제56권6호
• /
• pp.347-352
• /
• 2023

The protein family of poly (ADP-ribose) polymerases (PARPs) is comprised of multifunctional nuclear enzymes. Several PARP inhibitors have been developed as new anticancer drugs to combat resistance to chemotherapy. Herein, we characterized PARP4 mRNA expression profiles in cisplatin-sensitive and cisplatin-resistant ovarian cancer cell lines. PARP4 mRNA expression was significantly upregulated in cisplatin-resistant ovarian cancer cell lines, and this upregulation was associated with the hypomethylation of specific cytosine-phosphate-guanine (CpG) sites (cg18582260 and cg17117459) on its promoter. Reduced PARP4 expression was restored by treating cisplatin-sensitive cell lines with a demethylation agent, implicating the epigenetic regulation of PARP4 expression by promoter methylation. Depletion of PARP4 expression in cisplatin-resistant cell lines reduced cisplatin chemoresistance and promoted cisplatin-induced DNA fragmentation. The differential mRNA expression and DNA methylation status at specific PARP4 promoter CpG sites (cg18582260 and cg17117459) according to cisplatin responses, was further validated in primary ovarian tumor tissues. The results showed significantly increased PARP4 mRNA expressions and decreased DNA methylation levels at specific PARP4 promoter CpG sites (cg18582260 and cg17117459) in cisplatin-resistant patients. Additionally, the DNA methylation status at cg18582260 CpG sites in ovarian tumor tissues showed fairly clear discrimination between cisplatin-resistant patients and cisplatin-sensitive patients, with high accuracy (area under the curve = 0.86, P = 0.003845). Our findings suggest that the DNA methylation status of PARP4 at the specific promoter site (cg18582260) may be a useful diagnostic biomarker for predicting the response to cisplatin in ovarian cancer patients.

• 대한기계학회논문집
• /
• 제11권6호
• /
• pp.1005-1013
• /
• 1987

For the factory automation and unmanned machine operation, it is very important to manufacture highly reliable and efficient chip breakers for optimal chip control. In this research, using the CALMA CAD/CAM SYSTEM, the manufacturing process of 3-dimensional chip breakers is established. Using the results of the cutting test of the selected chip breakers with double-step grooves, the chip breaking mechanism is schematically analysed. An expression for the chip breaking relation is derived which considers chip material behavior following LUDWIK's stress-strain curve, chip breaking criterion and the shape of chip breakers. This contains the thickness of chip, the radius of chip curl, and the mechanical properties of chip materials. It is found that the expression agrees very closely with the experimental results.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.129-132
• /
• 2001

This paper presents an efficient method to estimate the maximum SSN (simultaneous switching noise) for ground interconnection networks in CMOS systems using Taylor's series and analyzes the truncation error that has occurred in Taylor's series approximation. We assume that the curve form of noise voltage on ground interconnection networks is linear and derive a polynomial expression to estimate the maximum value of SSN using $\alpha$-power MOS model. The maximum relative error due to the truncation is shown to be under 1.87% through simulations when we approximate the noise expression in the 3rd-order polynomial.

• Communications for Statistical Applications and Methods
• /
• 제25권3호
• /
• pp.307-319
• /
• 2018

High-throughput technologies enable the simultaneous evaluation of thousands of genes that could discriminate different subclasses of complex diseases. Ranking genes according to differential expression is an important screening step for follow-up analysis. Many statistical measures have been proposed for this purpose. A good ranked list should provide a stable rank (at least for top-ranked gene), and the top ranked genes should have a high power in differentiating different disease status. However, there is a lack of emphasis in the literature on ranking genes based on these two criteria simultaneously. To achieve the above two criteria simultaneously, we proposed to apply a previously reported metric, the modified area under the receiver operating characteristic cure, to gene ranking. The proposed ranking method is found to be promising in leading to a stable ranking list and good prediction performances of top ranked genes. The findings are illustrated through studies on both synthesized data and real microarray gene expression data. The proposed method is recommended for ranking genes or other biomarkers for high-dimensional omics studies.

• 복식문화연구
• /
• 제7권1호
• /
• pp.128-140
• /
• 1999

The Psychology of putting on clothes has close relation with sexuality, and eroticism is important in clothing. Present article aims to understand eroticism correctly and to make it evaluated as an art in modern fashion and as an aesthetic to express woman\`s beauty. Modern eroticism in fashion may be divided into direct, indirect and symbolic expression made. The result are as follow: First, direct made, a representation of desire into direct, indirect and symbolic expression of body or physical curve with tight garment. Second, indirect made, a see-though technique using association, represents sexual appeal by imagination on body area hidden by clothes made of see-through material. And third symbolic made express sexual libido by representing body area or clothes which symbolizing woman\`s sexuality using materials like fur or silk. Eroticism in modern clothing, therefore, should be understood as a beauty that is expressed by human artistic desire. Further studies are needed to explain the characteristics of eroticism in every culture because human nature is apt to from diverse kind of cultures.

• 대한전기학회논문지
• /
• 제32권3호
• /
• pp.69-75
• /
• 1983

This paper presents a improved algorithm for the generating capacity reliability evaluation using the frequency and duration approach. One of the specific feature of this algorithm is that propose the cumulative state load model via analytic expression of load duration curve and cumulative load frequency characteristic in conside ration of daily peak load. The paper illustrates the utilization of the proposed algorithm in actual system studies using the generating system of KEPCO. The results presented will provide a valuable reference for maintaining and planing the generating system.

• 제어로봇시스템학회논문지
• /
• 제18권12호
• /
• pp.1079-1085
• /
• 2012

For precise motion control, S-curve velocity profile is generally used but it has disadvantage of relatively long calculation time for floating-point arithmetics. In this paper, we present a new generating method for velocity profile to reduce delay time of profile generation so that it overcomes such disadvantage and enhances the efficiency of precise motion control. In this approach, the velocity profile is designed based on the gamma correction expression that is generally used in image processing to obtain a smoother movement without any critical jerk. The proposed velocity profile is designed to support both T-curve and S-curve velocity profile. It can generate precise profile by adding an offset to the velocity profile with decimals under floating point that are not counted during gamma correction arithmetic operation. As a result, the operation time is saved and the efficiency is improved. The proposed method is compared with the existing method that generates velocity profile using ring buffer on a 8-bit low-cost MCU. The result shows that the proposed method has no delay in generating driving profile with good accuracy of each cycle velocity. The significance of the proposed method lies in reduction of the operation time without degrading the motion accuracy. Generated driving signal also shows to verify effectiveness of the proposed method.