• 한국초전도ㆍ저온공학회논문지
• /
• 제18권2호
• /
• pp.18-20
• /
• 2016

The study of superconducting fault current limiter (SFCL) is continuously being studied as a countermeasure for reducing fault-current in the power system. When the fault occurred in the power system, the fault-current was limited by the generated impedance of SFCLs. The operational characteristics of the flux-offset type SFCL according to turn ratios between the primary and the secondary winding of a reactor were compared in this study. We connected the secondary core to a superconductor and a SCR switch in series in the suggested structure. The fault current in the primary and the secondary winding of the reactor and the voltage of the superconductor on the secondary were measured and compared. The results showed that the fault current in the load line was the lowest and the voltage applied at both ends of the superconductor was also low when the secondary winding of the reactor had lower turn ratio than the primary. It was confirmed based on these results that the turn ratio of the secondary winding of the reactor must be designed to be lower than that of the primary winding to reduce the burden of the superconductor and to lower the fault current. Also, the suggested structure could increase the duration of the limited current by limiting the continuous current after the first half cycle from the fault with the fault current limiter.

• 제어로봇시스템학회논문지
• /
• 제6권12호
• /
• pp.1053-1060
• /
• 2000

In this paper, a discrete-time variable structure control method using recursively defined switching function and a decoupled variable structure disturbance compensator is used to achieve high performance circular motion control of a CNC machining center. The discrete-time variable structure control with the decoupled disturbance compensator method developed in this paper uses a recursive switching function defined as the sum of the current tracking error vector and the previous value of the switching function multiplied by a positive constant less than one. This recursive switching function provides much improved performance compared to the method that uses a switching function defined only as a linear combination of the current tracking error. Enhancements in tracking performance are demonstrated in the circular motion control using a CNC milling machine.

• 한국국방경영분석학회지
• /
• 제24권2호
• /
• pp.17-29
• /
• 1998

This paper is to aimed to design a model of Korea defense information resource management structure from the viewpoint of system's approach, especially focusing on planning/programming procedures, organizational structure and business process re-engineering. The author analyzed current projects and plans on the field of Korea defense information systems, for finding what kinds of problems and why the problems occurred. The author concluded that many problems came from wrong approach of previous information resource management. Highlights of the proposed model are as follows: 1) Planning and programming structure must be considered as a major information resources and it must be managed as a key role through the whole system life cycle; 2) Organizational structure should be properly set up for managing and implementing information system projects; 3) Business process should also be analyzed thoroughly for re-engineering and innovating current inefficient organizational structure. These three additional viewpoints added to previous model for improving Korea defense information resource management.

• 반도체디스플레이기술학회지
• /
• 제4권3호
• /
• pp.5-9
• /
• 2005

The bonding structure of organic materials such as fluorinated amorphous carbon films was classified into two types due to the chemical shifts. The electrical properties of fluorinated amorphous carbon films also showed very different effect of two types notwithstanding a very little difference. Fluorinated amorphous carbon films with the cross-link break-age structure existed large leakage current resulting from effect of the electron tunneling. Increasing the cation due to the electron-deficient group increased the barrier height of the films with the cross-link amorphous structure, therefore the electric characteristic of the final materials with low dielectric constant was also improved. The lowest dielectric constant is 2.3 at the sample with the cross-link amorphous structure.

• 한국가시화정보학회지
• /
• 제17권2호
• /
• pp.17-24
• /
• 2019

The purpose of this study is to study the fluid-dynamic and structural characteristics of the conventional greenhouse and to find possible improvement on the current greenhouse. The greenhouse is required to have enough rigidity of the structure while the installation and reinforcement should be as easy as possible. In this study, the structural stability to the snow load was tested through the computational structure analysis based on the building structure standard, and the wind load was computed by computational fluid-structure interaction analysis. The current analysis can be used as a reference data for a new greenhouse and it will be economically viable by reducing installation and maintenance costs.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.611-613
• /
• 2016

TCAD 시뮬레이션을 이용하여 소스영역으로 오버랩된(overlapped) 게이트를 가진 터널링 전계효과 트랜지스터(Tunnel Field-Effect Transistor; TFET)의 오버랩된 게이트 길이에 따른 터널링 전류 특성을 조사하였다. 터널링은 크게 라인터널링과 포인트 터널링으로 구분되는데, 라인터널링이 포인트터널링보다 subthreshold swing(SS), on-current에서 더 높은 성능을 보인다. 본 논문은 Silicon, Germanium, Si-Ge Hetero TFET구조에서 게이트 길이를 소스영역으로 오버랩될 경우에 포인트 터널링과 라인터널링의 효과를 조사해서 SS와 on-current에 최적합한 구조의 가이드라인을 제시한다.

• Corrosion Science and Technology
• /
• 제23권3호
• /
• pp.195-202
• /
• 2024

A zinc mesh sacrificial anode cathodic protection method is recently being developed to protect the reinforced concrete structure in a marine environment. However, comprehensive information regarding the cathodic protection technology applied to reinforced concrete test specimens utilizing zinc mesh sacrificial anodes remains limited. Particularly, no research has investigated the effective range of sacrificial anode cathodic protection in a reinforced concrete structure regarding the transmission of protection current from zinc mesh sacrificial anode to the reinforced concrete structure, particularly concerning effects of temperature variations. This study examined the distribution of potential and current using a long single rebar and several segment reinforcing bars inside a horizontal beam. Vertical pile specimens were applied with a zinc mesh sacrificial anode to simulate concrete bridges or harbor structures. To check the effect of cathodic protection, cathodic protection potential and current of the reinforced concrete specimens were measured and 100 mV depolarization criterion test was performed. It was confirmed that effect of cathodic protection varied depending on resistivity and temperature. The cathodic protection test of pile specimens revealed that the maximum reachable range of cathodic protection current was 10 cm from the waterline as observed in the experiment.

• 한국해안해양공학회지
• /
• 제19권2호
• /
• pp.136-145
• /
• 2007

파랑이 수중 천퇴부를 넘어 쇄파하는 경우 파고는 작게 형성되나 강한 이차적 흐름 (쇄파유도류)이 발생한다. 따라서, 임의의 해양구조물이 쇄파대에 위치할 경우에는 단순히 가시적인 파고에만 근거한 파력산정은 과소설계를 초래할 가능성이 있으며 구조물의 안정설계를 위해서는 쇄파유도류의 유속이 가미된 상태에서의 유체력을 정확히 산정하여 반영할 필요가 있다. 본 연구에서는 Boussinesq 방정식 모델을 이용하여 쇄파대내에서의 파고분포와 쇄파유도류를 계산하는 기법을 수립하였으며 과거에 수행하였던 이어도 해양과학기지의 수리모형실험 (1/120)의 모델영역에 적용하였다. 이 계산결과를 이용하여 모형구조물에 작용하는 유체력을 계산하고 수리모형실험 결과와 비교함으로써 쇄파유도류의 영향을 정량적으로 평가하였다.

• 한국전기전자재료학회논문지
• /
• 제33권4호
• /
• pp.281-285
• /
• 2020

Oxide semiconductor devices have become increasingly important because of their high mobility and good uniformity. The channel length of oxide semiconductor thin film transistors (TFTs) also shrinks as the display resolution increases. It is well known that reducing the channel length of a TFT is detrimental to the current saturation because of drain-induced barrier lowering, as well as the movement of the pinch-off point. In an organic light-emitting diode (OLED), the lack of current saturation in the driving TFT creates a major problem in the control of OLED current. To obtain improved current saturation in short channels, we fabricated indium gallium zinc oxide (IGZO) TFTs with single gate and double gate structures, and evaluated the electrical characteristics of both devices. For the double gate structure, we connected the bottom gate electrode to the source electrode, so that the electric potential of the bottom gate was fixed to that of the source. We denote the double gate structure with the bottom gate fixed at the source potential as the BGFP (bottom gate with fixed potential) structure. For the BGFP TFT, the current saturation, as determined by the output characteristics, is better than that of the conventional single gate TFT. This is because the change in the source side potential barrier by the drain field has been suppressed.

• 한국표면공학회지
• /
• 제51권6호
• /
• pp.415-420
• /
• 2018

The possibility of an improvement in heat dissipation performance of aluminum alloy heat sink for shipboard LED luminaries through plasma electrolytic oxidation (PEO) was investigated. Four different PEO coatings were produced on aluminum alloy 5052 in silicate based alkaline solution by varying current density ($50{\sim}200mA/cm^2$). On voltage-time response curves, three stages were clearly distinguished at all current densities, namely an initial linear increase, slowdown of increase rate, and steady state(constant voltage). It was found that the increase in current density caused the breakdown voltage to increase. Two different surface morphologies - coralline porous structure and pancake structure - were confirmed by SEM examination. The coralline porous structure was predominant in the coatings produced at lower current densities (50 and $100mA/cm^2$) while under high current densities(150 and $200mA/cm^2$) the pancake structure became dominant. The coating thickness was measured and found to be in a range between about $13{\mu}m$ and $44{\mu}m$, showing increasing thickness with increasing current density. As a result, $100mA/cm^2$ was proposed as an effective process parameter to improve the heat dissipation performance of aluminum alloy heat sink, which could lower the LED operating temperature by about 30%.