• International Journal of Advanced Culture Technology
• /
• v.8 no.3
• /
• pp.186-191
• /
• 2020

Artificial Intelligence (AI) technology is used in a variety of fields because it can make inferences and plans through learning processes. In the field of coding technologies, AI has been introduced as a tool for personalized and customized education to provide new educational environments. Also, it can be used as a virtual assistant in coding operations for easier and more efficient coding. Currently, as coding education becomes mandatory around the world, students' interest in programming is heightened. The purpose of coding education is to develop the ability to solve problems and fuse different academic fields through computational thinking and creative thinking to cultivate talented persons who can adapt well to the Fourth Industrial Revolution era. However, new non-computer science major students who take software-related subjects as compulsory liberal arts subjects at university came to experience many difficulties in these subjects, which they are experiencing for the first time. AI based coding technologies can be used to solve their difficulties and to increase the learning effect of non-computer majors who come across software for the first time. Therefore, this study examines the current state of AI based coding technologies and suggests the direction of future coding education.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.63-66
• /
• 1998

Prototype MFSFET′s using ferroelectric oxide LiNbO$_3$ as a gate insulator have been successfully fabricated with the help of 2 sheets of metal masks and demonstrated nonvolatile memory operations of the MFSFET′s. The estimated field-effect electron mobility and transconductance on a linear region of the fabricated FET were 600 $\textrm{cm}^2$/V.s and 0.16 mS/mm, respectively. The drain current of the "on" state was more than 4 orders of magnitude larger than the "off" state current at the same "read" gate voltage of 0.5 V, which means the memory operation of the MFSFET. A write voltage as low as $\pm$3 V, which is applicable to low power integrate circuits, was used for polarization reversal.

• Journal of Chest Surgery
• /
• v.48 no.5
• /
• pp.311-317
• /
• 2015

Background: Robotic surgery is an alternative to minimally invasive surgery. The aim of this study was to report on current trends in robotic thoracic and cardiovascular surgical techniques in Korea. Methods: Data from the National Evidence-based Healthcare Collaborating Agency (NECA) between January 2006 and June 2012 were used in this study, including a total of 932 cases of robotic surgeries reported to NECA. The annual trends in the case volume, indications for robotic surgery, and distribution by hospitals and surgeons were analyzed in this study. Results: Of the 932 cases, 591 (63%) were thoracic operations and 340 (37%) were cardiac operations. The case number increased explosively in 2007 and 2008. However, the rate of increase regained a steady state after 2011. The main indications for robotic thoracic surgery were pulmonary disease (n=271, 46%), esophageal disease (n=199, 34%), and mediastinal disease (n=117, 20%). The main indications for robotic cardiac surgery were valvular heart disease (n=228, 67%), atrial septal defect (n=79, 23%), and cardiac myxoma (n=27, 8%). Robotic thoracic and cardiovascular surgeries were performed in 19 hospitals. Three large volume hospitals performed 94% of the case volume of robotic cardiac surgery and 74% of robotic thoracic surgery. Centralization of robotic operation was significantly (p<0.0001) more common in cardiac surgery than in thoracic surgery. A total of 39 surgeons performed robotic surgeries. However, only 27% of cardiac surgeons and 23% of thoracic surgeons performed more than 10 cases of robotic surgery. Conclusion: Trend analysis of robotic and cardiovascular operations demonstrated a gradual increase in the surgical volume in Korea. Meanwhile, centralization of surgical cases toward specific surgeons in specific hospitals was observed.

• Nuclear Engineering and Technology
• /
• v.36 no.6
• /
• pp.528-539
• /
• 2004

It is essential in commercial reactors that the safety limits imposed on the fuel pellets and fuel clad barriers, such as the linear power density (LPD) and the departure from nucleate boiling ratio (DNBR), are not violated during reactor operations. In order to accurately monitor the safety limits of current reactor states, a detailed three-dimensional (3D) core power distribution should be estimated from the in-core detector signals. In this paper, we propose a calculation methodology for detailed 3D core power distribution, using in-core detector signals and core monitoring constants such as the 3D Coupling Coefficients (3DCC), node power fraction, and pin-to-node factors. Also, the calculation method for several core safety parameters is introduced. The core monitoring constants for the real core state are promptly provided by the core design code and on-line MASTER (Multi-purpose Analyzer for Static and Transient Effects of Reactors), coupled with the core monitoring program. through the plant computer, core state variables, which include reactor thermal power, control rod bank position, boron concentration, inlet moderator temperature, and flow rate, are supplied as input data for MASTER. MASTER performs the core calculation based on the neutron balance equation and generates several core monitoring constants corresponding to the real core state in addition to the expected core power distribution. The accuracy of the developed method is verified through a comparison with the current CECOR method. Because in all the verification calculation cases the proposed method shows a more conservative value than the best estimated value and a less conservative one than the current CECOR and COLSS methods, it is also confirmed that this method secures a greater operating margin through the simulation of the YGN-3 Cycle-1 core from the viewpoint of the power peaking factor for the LPD and the pseudo hot pin axial power distribution for the DNBR calculation.

• ETRI Journal
• /
• v.36 no.5
• /
• pp.876-879
• /
• 2014

In current NAND flash design, one of the most challenging issues is reducing peak current consumption (peak ICC), as it leads to peak power drop, which can cause malfunctions in NAND flash memory. This paper presents an efficient approach for reducing the peak ICC of the cache program in NAND flash memory - namely, a program Cache Busy Time (tPCBSY) control method. The proposed tPCBSY control method is based on the interesting observation that the array program current (ICC2) is mainly decided by the bit-line bias condition. In the proposed approach, when peak ICC2 becomes larger than a threshold value, which is determined by a cache loop number, cache data cannot be loaded to the cache buffer (CB). On the other hand, when peak ICC2 is smaller than the threshold level, cache data can be loaded to the CB. As a result, the peak ICC of the cache program is reduced by 32% at the least significant bit page and by 15% at the most significant bit page. In addition, the program throughput reaches 20 MB/s in multiplane cache program operation, without restrictions caused by a drop in peak power due to cache program operations in a solid-state drive.

• Smart Structures and Systems
• /
• v.14 no.4
• /
• pp.541-558
• /
• 2014

This paper proposes a new design of shape memory alloy (SMA) wire actuated gripper for open mode operation. SMA can generate smooth muscle movements during actuation which make them potentially good contenders in designing grippers. The principle of the shape memory alloy gripper is to convert the linear displacement of the SMA wire actuator into the angular displacement of the gripping jaw. Steady state analysis is performed to design the wire diameter of the bias spring for a known SMA wire. The gripper is designed to open about an angle of $22.5^{\circ}$ when actuated using pulsating electric current from a constant current source. The safe operating power range of the gripper is determined and verified theoretically. Experimental evaluation for the uncontrolled gripper showed a rotation of $19.97^{\circ}$. Forced cooling techniques were employed to speed up the cooling process. The gripper is simple and robust in design (single movable jaw), easy to fabricate, low cost, and exhibits wide handling capabilities like longer object handling time and handling wide sizes of objects with minimum utilization of power since power is required only to grasp and release operations.

• Journal of Korean Neurosurgical Society
• /
• v.60 no.3
• /
• pp.322-326
• /
• 2017

Neuroendoscopic surgery is performed because it causes minimal damage to normal structures, carries a lower rate of complications, and achieves excellent outcomes. Surgeons using an endoscope and related instruments can perform complex operations through very small incisions, which is especially useful for minimally invasive procedures for the brain and spine. Neuroendoscopic surgery is now performed in cases of obstructive hydrocephalus, various intraventricular lesions, hypothalamic hamartomas, craniosynostosis, skull base tumors, and spinal lesions. This review discusses the brief history of neuroendoscopy and the current state and future perspectives of endoscopic surgery.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.36-38
• /
• 2018

As the battery capacity requirement increases, battery cells are connected in a parallel configuration. However, the sharing current of each battery cell becomes unequal due to the imbalance between cell's impedance which results the mismatched states of charge (SOC). The conventional fixed-resistance balancing methods have a limitation in battery equalization performance and system efficiency. This paper proposes a battery equalization method based on dynamic resistance technique, which can improve equalization performance and reduce the loss dissipation. Based on the SOC rate of parallel connected battery cells, the switches in the equalization circuit are controlled to change the equivalent series impedance of the parallel branch, which regulates the current flow to maximize SOC utilization. To verify the method, operations of 4 parallel-connected 18650 Li-ion battery cells with 3.7V-2.6Ah individually are simulated on Matlab/Simulink. The results show that the SOCs are balanced within 1% difference with less power dissipation over the conventional method.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.05a
• /
• pp.209-213
• /
• 2005

The current AIS network and. system are run on a full scale with 22 ground stations and. 11 operational systems, completing a nation-wide, integrated network However, currently it needs to manage sea traffic by linking AIS to VIS which 1vs a limited service area due to restricted radar detection zones in harbors or coastal areas. Accordingly this study analyzes the current status of the AIS system and. proposes technological and. operational improvement plan of the current AIS system through investigating the actual conditions of the AIS system and. its operations.

• Journal of Distribution Science
• /
• v.19 no.7
• /
• pp.29-39
• /
• 2021

Purpose: As China experienced a crisis due to Covid-19, the global supply chain collapsed and affected the world. Therefore, it is time for a change in port operational efficiency, increasing in importance with changes in the global supply chain. This study analyzed Shanghai Port's efficiency, the world's largest port and representative hub port in Northeast Asia, by looking at the relationship between facility factors and cargo throughput to present hub port development's timely implications. Research design, data and methodology: This study applied the Charnes, Cooper, and Rhodes (CCR) and Banker, Chames, and Cooper (BCC) models of the data development analysis (DEA) to construct an analysis from the input-oriented and output-oriented perspectives. Results: As a result, Yidong Container Terminal can be considered the most optimized in facilities and operation processes. Yidong and Shengdong Container Terminal should maintain current operating levels, while Pudong Container Terminal should review facility investments. Also, Zhendong, Huong, Mingdong, and Guandong Container Terminal should be reviewed to increase cargo throughput or to adjust current input variables in the current state. Conclusions: Therefore, the utilization of the container terminal input variables should be reviewed, and the factors of inefficiency should be improved. Moreover, the strategic focus of container terminal operations should be on increasing annual cargo throughput.