• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.3
• /
• pp.938-957
• /
• 2023

The limited computing power of sensor nodes in wireless sensor networks (WSNs) and data tampering during wireless transmission are two important issues. In this paper, we propose a scheme for independent individual authentication of WSNs data based on digital watermarking technology. Digital watermarking suits well for WSNs, owing to its lower computational cost. The proposed scheme uses independent individual to generate a digital watermark and embeds the watermark in current data item. Moreover, a sink node extracts the watermark in single data and compares it with the generated watermark, thereby achieving integrity verification of data. Inherently, individual validation differs from the grouping-level validation, and avoids the lack of grouping robustness. The improved performance of individual integrity verification based on proposed scheme is validated through experimental analysis. Lastly, compared to other state-of-the-art schemes, our proposed scheme significantly reduces the false negative rate by an average of 5%, the false positive rate by an average of 80% of data verification, and increases the correct verification rate by 50% on average.

• Journal of Korean Society of Forest Science
• /
• v.97 no.5
• /
• pp.516-524
• /
• 2008

We investigated on the distribution of nutrient contents (N. P and K) in current and one-year old needles of Korean pine, Pinus koraiensis, to understand the physiological effects of alternate bearing. One experimental set was designed with three types of cone number (one, three and five) under natural state and cone number of another one was controlled by thinning. Test samples were separated to collect into three fractions; current needles on the shoot and one-year old needles above and under the cone. On the branch without cone, N, P and K concentrations in needles on the shoot were higher than those in needles of one-year old branch. At natural state, needle P concentration was the lowest in needles on the five-cone branch in August. Macronutrient concentrations were the lowest in needles above the cone, which was remarkably observed in needle K concentration. Under cone thinning, N. P and K concentrations were the highest in needles on one-cone branch and the lowest in needles on five-cone branch. Needle nutrient concentrations were the lowest in needles above the cone, which was remarkably observed in the needle on five-cone branch. In conclusion, the current needles of the shoot and cones are a strong sink of nutrient like N. P and K, and the increase of cone number influences nutrient removal from needles.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.66-72
• /
• 2016

An LED lighting control system was developed to combine information technology and LED lights for efficient management and energy savings. The system can monitor and control the status of an LED luminaire using Bluetooth wireless communication, sensor technology, and smart phones. An LED lighting control circuit was designed using a temperature sensor, illumination sensor, and Bluetooth module with a fuzzy constant-current control circuit. We extended the lifetime and prevented damage to the LED by optimizing the supply current of the LED luminaire based on the heat-generation temperature of $70^{\circ}C$ of an LED heat sink. We also automatically adjusted the ON/OFF time depending on the ambient illumination of the LED luminaire. By allowing easy control of the LED luminaires on a smartphone, we improved the efficiency and achieved energy savings. The control system was validated through experiments for normal operation.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.12 no.1
• /
• pp.78-84
• /
• 2016

The FHX (Forced-draft sodium-to-air Heat Exchanger) employed in the ADHRS (active decay heat removal system) is a shell-and-tube type counter-current flow heat exchanger with M-shape finned-tube arrangement. Liquid sodium flows inside the heat transfer tubes and atmospheric air flows over the finned tubes. The unit is placed in the upper region of the reactor building and has function of dumping the system heat load into the final heat sink, i.e., the atmosphere. Heat is transmitted from the primary cold sodium pool into the ADHRS sodium loop via DHX (decay heat exchanger), and a direct heat exchange occurs between the tube-side sodium and the shell-side air through the FHX tube wall. This paper describes the DHRS and the structural design of the FHX.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1529-1531
• /
• 2008

Since the discovery over a decade ago, carbon nanotubes (CNTs) have been attracting considerable attentions both from scientists and engineers. Because of the excellent field emission properties, such as high aspect ratio, extremely small diameter, and high emission current, CNTs become a potential candidate as field emitter for field emission display (FED) and lighting (FEL) as backlight for LCD. Due to the exceptional physical properties, such as superior thermal and electrical conductivities, as well as high stiffness and strength, the CNT-based composites can be as light-weight heat-sink or thermal spreader materials used for power electronic devices, such as power LED for general illumination. The CNTs for above applications will be reviewed, and related materials and devices will be demonstrated in this paper.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.3
• /
• pp.96-102
• /
• 2009

This paper deals with gate drive and power IC for high power devices(600V/200A and 1200V/150A). The proposed gate driver provides high gate driving capability (4 A source, 8 A sink), and over-current protected by means of power transistor desaturation detection. In addition, soft-shutdown function is added to reduce voltage overshoots due to parasitic inductance. This gate drive If is designed, fabricated, and tested using the Dongbu hitek 0.35um BCDMOS process.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.12
• /
• pp.1756-1762
• /
• 2002

To effectively meet current regulations on the exhaust emissions of diesel engine required to control the deterioration of air pollution in the whole world, this study is to investigate the effects of water induction through the air intake system on the characteristics of combustion and exhaust emissions in IDI diesel engine. A method fur supplying water through the air intake system to reduce the exhaust emissions has been considered with other methods such as water introduction in the form of water-in-fuel emulsion or water injection directly into the combustion chamber, but it has not been studied about the effects of water on the combustion concepts and the characteristics of exhaust emissions in detail until now. In this study, the formation of NOx was significantly suppressed by decreasing the gas peak temperature during the initial combustion process because the water play a role as a heat sink during evaporating in the combustion chamber, but the smoke was slightly increased by increasing water amount.

• Korean Institute of Interior Design Journal
• /
• v.25 no.4
• /
• pp.113-124
• /
• 2016

This research examines domestic and oversea's barrier-free design guidelines provided exclusively for children and their implementations in the common spaces of the outpatient clinics in two pediatric rehabilitation hospitals in Seoul. Based on literature review, a checklist was developed to compare various barrier-free design guidelines in consideration of children's accessibility in space. In addition, four spatial areas in the outpatient clinics of the two hospitals were investigated based on the checklist. As a result, the domestic and Japanese guidelines were aiming primarily to all user groups regardless of ages. Whereas in other oversea's guidelines, a number of barrier-free design standards exclusive for children were found in the facility items such as handrail, sink, urine, toilet, water fountain, chair, table, shelve, and so on, throughout the indoor waiting and sanitary spaces. Concerning implementations, most of the items in the indoor passage, waiting, and sanitary spaces of the two hospitals were not sufficiently facilitated enough to meet with the barrier-free design standards exclusive for children. As such, it is recommended to review and improve the current domestic barrier-free design guideline to accommodate various physical and spatial needs of children in all age groups and regardless of disability types, in the design of a pediatric rehabilitation hospital in the future.

• Korean Institute of Interior Design Journal
• /
• v.17 no.5
• /
• pp.12-22
• /
• 2008

The purpose of this article is to establish fundamental sources and guidelines of bathroom designs of brand apartments in Korea. The article examines the current conditions of bathroom, satisfaction rates, and preference rates of residents in Mid-sized apartment units of the top five brand apartments based on construction capacity and brand popularity. A total of 427 samples, acquired via internet survey, were analyzed with the statistical computer program SPSS PC+ window version 15.0. The conclusions of the article are as follows: 1) Fixtures and products which fulfill various behaviors, as well as multi-functional space programming, are demanded. 2) Developing clear standards of basic bathroom fixtures and environments is also required in further research and to be applied to practical bathroom design. 3) The bathroom fixtures and environments ought to accommodate all age groups. 4) Respondents preferred a separated dry floor, either toilet or sink portion, to a full-dry or full-wet floor. 5) Respondents of all age groups considered bathroom as a private space, thus it should facilitate various private activities. The results of this study would contribute to adequate and sound bathroom design as key information.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.10
• /
• pp.4531-4535
• /
• 2011

In this paper, USN(Ubiquitous Sensor Network) is used in the structure of the tree routing was implemented in embedded systems. Tree Routing in the USN to the sink node to transmit sensor data is one of the techniques. When routing, sensor data is transmitted based on pre-defined ID according hop number. In order to have optimal routing path, the current state of the wireless sector and the sensor node informations were used. Also, received sensor data and the results of the tree routing by implementing an embedded system. This embedded system can be applied to a portable sensor information collecting system.