• Journal of Welding and Joining
• /
• v.32 no.1
• /
• pp.87-92
• /
• 2014

Recently, use of thick Al 5083 plate has increased in production of LNG storage tank. In general, multi-pass welding has been used to achieve sufficient penetration in thick plate welding. High current welding which enables high deposition and deep penetration is preferred in thick plate welding because the increase of number of pass increases manufacturing cost and formation of weld defect. In this study, welding characteristics according to various Ar/He shielding gas composition was investigated in high current MIG welding. The bead-on-plate welding and V groove welding were conducted on Al 5083 alloy with a thickness of .25 mm. The effect of shielding gas composition on bead shape was evaluated and proper shielding gas composition was proposed. Also arc stability was examined under selected shielding gas composition. One side-one pass welding experiments were conducted for V groove specimen with a thickness of 25 mm. Mechanical properties and hardness profiles were measured for the V groove specimens.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.517-520
• /
• 2003

The purpose of this paper is to investigate the effect of arc current and contact velocity on the erosion of silver contact to be used in low voltage circuit breakers. The arc current range from $2kA_{rms}$ to $20kA_{rms}$. A test system allows the control of the opening velocity profiles with contact velocities up to 10m/s and also enables the synchronization of the contact opening with a point on the arc current waveform. Contact erosion is evaluated by measuring the mass change of the cathode and anode. The results show that increase the opening velocity from 2m/s to 6m/s leads to an decrease in the contact erosion. The material transfer from one electrode to another is shown to depend on the transfer charge and the opening velocity of the contacts.

• 한국해양학회지
• /
• v.29 no.2
• /
• pp.119-131
• /
• 1994

Vertical structures of wind-driven and tidal currents in a rectangular shaped uniform-depth basin of homogeneous water have been investigated using a mode-splitted, multi-level grid-box, hydrodynamic numerical model. The model was verified using analytical solutions for various vertical eddy viscosity profiles such as: a constant eddy viscosity, a linearly decreasing or increasing variation with depth, a quadratic variation with depth and an exponential variation with depth. Particular attention has been paid on the effects of "near-surface wall layer" on vertical shear of velocity. In numerical calculations, the whole water depth was divided into 13 levels with an unequal grid spacing. the model satisfactorily reproduces the velocity profile, but in case the eddy viscosity decreases rapidly with depth as in quadratical or exponential variation with depth, the vertical gradient of velocity near the bottom became very steep, and analytical solutions and numerical results showed some discrepancy. The vertical structures of horizontal velocity vary with both the depth-averaged value of eddy viscosity and its profiles. the velocity near the sea surface and near the bottom responded sensitively to the eddy viscosity of wall layer. For wind-driven current, the strong velocity shear was generated near the sea surface as eddy viscosity near the surface became small. For tidal current, the velocity above the sea bottom layer was almost constant regardless of the profiles of vertical eddy viscosity, but velocity in the sea bottom layer showed strong shear as eddy viscosity became small.

• Food Science of Animal Resources
• /
• v.29 no.5
• /
• pp.599-611
• /
• 2009

This article concerns the labeling guideline for health benefits of livestock products. In recent years, livestock products with health benefits have emerged as a key market for livestock product industries. However, the current labeling regulation for functional foods severely prohibits livestock product industries from attaching most of the health benefits claims to the products. Also, manufacturers have some difficulties in labeling the health benefits of certain livestock products because of a lack of guidelines on health benefit claims for livestock products. Therefore, some livestock product industries and scientists have strongly demanded a revision of labeling regulation, Appended Chart No. 14 provided by Article 52 (2) of Enforcement Regulation of the Processing of Livestock Products Act, so they could mark the health benefits on their products. To support the 'revision of labeling regulation', the goals of this article were as follows; 1) to assess the current situation on nutrition labeling and nutrition claims on foods, 2) to determine the current situation on health claim regulatory systems used in foreign countries (CODEX, USA, Japan, EU, and Australia/New Zealand), 3) to assess the current situation on the health claim or health benefit claim regulations for functional foods, conventional foods, and livestock products in Korea, and 4) to determine the need for complement in health benefit claim for livestock products. In conclusion, guidelines for the use of health benefit claims on livestock products should be prepared as soon as possible and the guidelines should be viable and easy for manufacturers and control authorities to understand. Also, nutrient profiles should be developed to identify whether the livestock products are eligible to bear health benefit claims and to help consumers make the right choices.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2C
• /
• pp.133-142
• /
• 2006

Many methods have been tried to more correctly measure rock joint roughness. However, true roughness may be distorted and underestimated due to the sampling interval and measurement method. Thus, currently used measurement methods produce a dead zone and distort roughness profiles. The purpose of this study is to suggest new roughness measurement method by a camera-type 3D scanner as an alternative of currently used methods. First, the underestimation of artificial roughness is analyzed by using the current measurement method such as laser profilometry. Second, we replicate eight specimens from two rock joint surfaces, and digitize by a 3D scanner. Then, the roughness coefficient values obtained from eight numbers of 3D surface data and from three hundred twenty numbers of 2D profiles data are analyzed by using current and new measurement methods. The artificial simulation confirms that the sampling interval is one of main factors for the distortion of roughness and shows that inclination of waviness may not be considered any current methods. The experimental results show that the camera-type 3D scanner produces 10% larger roughness values than current methods. As the proposed new method is a fast, high precision and more accurate method for the roughness measurement, it should be a promising technique in this area.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.18 no.1
• /
• pp.1-12
• /
• 2013

Acoustic backscatter profiles were measured by Eco-sounder along an east-west section in the mid-eastern Yellow Sea and at an anchoring station in the low salinity region off the Keum River estuary in September 2012, with observing physical water property structure by CTD. Tidal front was established around the sand ridge developed in 50 m depth region. Internal waves measured by Eco-sounder during low tide period in the eastern side of the sand ridge were nonlinear depression waves with wave height of 15 m and mean wavelength of 500 m. These waves were interpreted into tidal internal waves that were produced by tidal current flowing over the sand ridge to the southeast. When weakly non-linear soliton model was applied, propagation speed and period of these internal depression wave were 50 m/s and 16~18 min. Red tides by Dinoflagelates Cochlodinium were observed in the sea surface where strong acoustic scattering layer was raised up to 7 m. Hourly CTD profiles taken at the anchoring station off the Keum River estuary showed the halocline depth change by tidal current and land-sea breeze. When tidal current flowed strongly to the northeast during flood period and land-breeze of 7 m/s blew to the west, the halocline was temporally raised up as much as 2 m and acoustic profile images showed a complex structure in the surface layer within 5-m depth: in tens of seconds the declined acoustic structure of strong and weak scattering signals alternatively appeared with entrainment and intrusion shape. These acoustic profile structures in the surface mixed layer were observed for the first time in the coastal sea of the mid-eastern Yellow Sea. The acoustic profile images and turbidity data suggest that relatively transparent low-layer water be intruded or entrained into the turbid upper-layer water by vertical shear between flood current and land breeze-induced surface current.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.1 s.53
• /
• pp.45-57
• /
• 2007

The mean shear wave velocity to the depth of 30 m (Vs30) derived from the western Vs is the current site classification criterion for determining the design seismic ground motion taking into account the site amplification potential. In order to evaluate the Vs30 at a site, a shear wave velocity (Vs) Profile extending to at least 30 m in depth must be acquired from in-situ seismic test. In many cases, however, the resultant depth of the Vs profile may not extend to 30 m, owing to the unfavorable field condition and the limitation of adopted testing techniques. In this study, the Vs30 and the mean shear wave velocity to a depth shallower, than 30 m (VsDs) were computed from the Vs profiles more than 30 m in depth obtained by performing various seismic tests at total 72 sites in Korea, and a correlation between Vs30 and VsDs was drawn based on the computed mean Vs data. In addition, a method for extrapolating the Vs profile from shallow depth to 30 m was developed by building a shape curve based on the average data of all Vs profiles. For evaluating the Vs30 from the shallow Vs profiles, both the methods using VsDs and shape curve result in less bias than the simplest method of extending the lowermost Vs equally to 30 m in depth, and are usefully applicable particularly in the cases of the Vs profiles extending to at least 10 m in depth.

• Asian Journal of Atmospheric Environment
• /
• v.9 no.2
• /
• pp.114-127
• /
• 2015

In the Mexico City Metropolitan Area (MCMA), ozone ($O_3$) concentration is still higher than in other urban areas in developed countries. In order to reveal the current state of photochemical air pollution and to provide data for validation of chemical transport models, vertical profiles of meteorological parameters and ozone concentrations were measured by ozonesonde in two field campaigns: the first one, during the change of season from wet to dry-cold (November 2011) and the second during the dry-warm season (March 2012). Unlike previous similar field campaigns, ozonesonde was launched twice daily. The observation data were used to analyze the production and distribution of ozone in the convective boundary layer. The observation days covered a wide range of meteorological conditions, and various profiles were obtained. The evolution of the mixing layer (ML) height was analyzed, revealing that ML evolution was faster during daytime in March 2012 than in November 2011. On a day in November 2011, the early-morning strong wind and the resulting vertical mixing was observed to have brought the high-ozone-concentration air-mass to the ground and caused relatively high surface ozone concentration in the morning. The amount of produced ozone in the MCMA was estimated by taking the difference between the two profiles on each day. In addition to the well-known positive correlation between daily maximum temperature and ozone production, effect of the ML height and wind stagnation was identified for a day in March 2012 when the maximum ground-level ozone concentration was observed during the two field campaigns. The relatively low ventilation coefficient in the morning and the relatively high value in the afternoon on this day implied efficient accumulation of the $O_3$ precursors and rapid production of $O_3$ in the ML.

• Archives of Pharmacal Research
• /
• v.20 no.6
• /
• pp.555-559
• /
• 1997

The three different batches of an oral sustained release melatonin (MT) delivery system were prepared by aqueous-based fluid-bed coating of the sugar spheres for the evaluation of in vitro release characteristics and plasma concentration profiles in human subjects. The MT contents in 20% coated sugar spheres of three batches (B1, B2 and B3) were $3.3{\pm}0.08$, $2.4{\pm}0.1$ and $2.5{\pm}0.13$ mg per gram of coated sugar spheres, respectively. The release profiles of three different batches had a very similar fashion. However, the release profiles of three different batches had a very similar fashion. However, the release half-lives $(T_{50%})$ of MT from B1, B2 and B3 was $3.70{\pm}0.2$, $5.2{\pm}0.2$ and $4.9{\pm}0.07h$, respectively. Plasma concentration profiles of sustained release 0.2mg melatonin-loaded sugar spheres containing 10% immediate release melatonin in gelatin capsules (B1 and B2) were then evaluated in human subjects. The in vivo plasma concentration profies of the two batches (B1 and B2) were very similar each other and located between the physiological endogenous ranges. The time to reach the peak concentration $(T_max)$ was more advanced in case of B1 when compared to B2. However, there was no statistically significant difference in the maximum concentration $(C_max)$ and the area under the curve (AUC) between B1 and B2. The AUC of melatonin-loaded sugar spheres containing 10% and 20% immediate release MT in human subjects had a good linearity between dose and AUC, regardless of the fraction of immediate release MT, indicating the first order elimination process of MT within these doses. The current oral sustained release MT delivery system may be utilized to treat circadian rhythm disorders if it is proven to be more clinically useful when compared to immediate release MT.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.9
• /
• pp.5489-5494
• /
• 2013

In the current study we aimed to show the common YMDD motif mutations in viral polymerase gene in chronic hepatitis B patients during lamivudine and adefovir therapy. Forty-one serum samples obtained from chronic hepatitis B patients (24 male, 17 female; age range: 34-68 years) were included in the study. HBV-DNA was extracted from the peripheral blood of the patients using an extraction kit (Invisorb, Instant Spin DNA/RNA Virus Mini Kit, Germany). A line probe assay and direct sequencing analyses (INNO-LIPA HBV DR v2; INNOGENETICS N.V, Ghent, Belgium) were applied to determine target mutations of the viral polymerase gene in positive HBV-DNA samples. A total of 41 mutations located in 21 different codons were detected in the current results. In 17 (41.5%) patients various point mutations were detected leading to lamivudin, adefovir and/or combined drug resistance. Wild polymerase gene profiles were detected in 24 (58.5%) HBV positive patients of the current cohort. Eight of the 17 samples (19.5%) having rtM204V/I/A missense transition and/or transversion point mutations and resistance to lamivudin. Six of the the mutated samples (14.6%) having rtL180M missense transversion mutation and resistance to combined adefovir and lamivudin. Three of the mutated samples (7.5%) having rtG215H by the double base substituation and resistance to adefovir. Three of the mutated samples (7.5%) having codon rtL181W due to the missense transversion point mutations and showed resistance to combined adefovir and lamivudin. Unreported novel point mutations were detected in the different codons of polymerase gene region in the current HBV positive cohort fromTurkish population. The current results provide evidence that rtL180M and rtM204V/I/A mutations of HBV-DNA may be associated with a poor antiviral response and HBV chronicity during conventional therapy in Turkish patients.