• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.11C
• /
• pp.1055-1063
• /
• 2002

In this paper, we have studied path selection problem using multiple metric. Current Internet selects a path using only one metric. The path selected by one metric is a best-effort service that can satisfy one requirements. In order to satisfy a call with various Qualify-of-Service(QoS) requirements, the path must satisfy multiple constraints. In many cases, path selection is NP-complete. The proposed algorithm is widest-least cost routing algorithm that selects a path based on cost metric which is basically a delay metric influenced by the network status. The proposed algorithm is a multiple metric path selection algorithm that has traffic distribution ability to select shortest path when network load is light and move traffic to other alternate path when the link load is high. We have compared the results with other routing algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.9
• /
• pp.765-772
• /
• 2013

In this paper, we studied the path loss model of Air Traffic Control(ATC) telecommunication radio channel at the Incheon International Airport(IIA) concourse area. We measured wave propagation characteristics on the two frequencies among VHF/UHF channel bands. The transmitting site radiated the Continuous Wave(CW). The propagation measurement was taken using the moving vehicle equipped with receiver and antenna. The transmitting power, frequency, and antenna height are the same as the current operating condition. The path loss exponent and intercept parameters were extracted by the basic path loss model and hata model. The path loss exponents at Concourse area were 3.1/3.13 and 3.01/3.38 respectively in 128.2MHz and 269.1MHz. The deviation of prediction error is 2.77/3.17 and 4.01/3.66. The new path loss equation at the Concourse area was also developed using the derived path loss parameters. The new path loss model was compared with other models. This result will be helpful for the ATC site selection and service quality evaluation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.179-183
• /
• 2019

The system stability must be ensured from the switching noise due to the power conversion efficiency and power conversion system miniaturization. Therefore, countermeasures to reduce switching noise during power conversion are essential. Thus, in the previous paper, we constructed the DC / DC Buck Converter circuit using MPQ4432 driver of MPS, and simulated the switching noise characteristics which occurs when the components are arranged differently in the 4 - layer PCB circuit structure with reference plane. In this paper, two different simulated circuits are fabricated and the characteristics of the conducted emission and the radiated emission are analyzed in the same way as the simulation. As a result, it was confirmed that the Conducted Emission characteristic was reduced by 2 ~ 9dB in the low frequency band and 6 ~ 7dB in the high frequency band depending on the configuration of the current return path. And the radiated emission characteristic is reduced by 9 dB. Conducted emission simulation results show that 6 ~ 7dB in the low frequency range and 2 ~ 9dB in the measurement result are somewhat different. In the high frequency band, it is confirmed that the experimental and simulation results are about 7dB. And Radiated Emission confirmed 12dB decrease in simulation, but confirmed decrease of 9dB in measurement result. It is confirmed that there is a slight difference in the amount of reduction, but the design of the power conversion circuit improves the noise characteristics according to the configuration of the current return path.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.332-335
• /
• 1995

Electrification pipe modeled on the oil path of the high power transformer is designed and manufactured. Distributions of oil flow velocity are simulated as spacer form in the electrification pipe. Streaming currents are investigated as each electrification pipe. The surface oil velocity of spacer is small the streaming current.

• Korean Journal of Computational Design and Engineering
• /
• v.3 no.4
• /
• pp.223-235
• /
• 1998

A dedicated CAM(Computer-Aided Manufacturing) system has been developed, which generated tool-path to machine Styrofoam stamping die-patterns in Chrysler Corporation. A previous process to build die-patterns was to "stick build" the pattern, in which stock is cut & glued together, and then the NC machining of part-surface shape completes building a Styrofoam die-pattern. The current process utilizes the developed CAM system, and almost removes the manual work, consequently reduces the overall lead time. The paper presents the overall system structures, tool-path generation, and some features of Styrofoam pattern machining.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.383-387
• /
• 1996

This paper presents a steering control strategy applicable to vehicle path following problems. This control strategy is based on realistic nonlinear equations of motion of multibody systems described in terms of relative joint coordinates. The acceleration of the steering angle is selected as a control input of the system. This input is obtained by considering position and slope errors at current and at advance times. This steering control strategy is tested in circular and lane change maneuvers with a nonlinear vehicle model.

• Progress in Superconductivity and Cryogenics
• /
• v.19 no.1
• /
• pp.26-29
• /
• 2017

We studied the distribution of the current density and its magnetic-field dependence in GdBCO coated conductors with AC bias currents using low temperature scanning Hall probe microscopy. We selectively measured magnetic field profiles from AC signal obtained by Lock-in technique and calculated current distributions by inversion calculation. In order to confirm the AC measurement results, we applied DC current corresponding to RMS value of AC current and compared distribution of AC and DC transport current. We carried out the same measurements at various external DC magnetic fields, and investigated field dependence of AC current distribution. We notice that the AC current distribution unaffected by external magnetic fields and preserved their own path on the contrary to DC current.

• Journal of Korean Society of Transportation
• /
• v.33 no.1
• /
• pp.50-60
• /
• 2015

Pedestrians not only walk along roads, but also pass through buildings or across open spaces. This study defines these unusual walk routes as social path. Social path is an informal pedestrian route that is not considered in a pedestrian network, even though it should be regarded as pedestrian route considering the fact that many people actually use this path. In response, current study related to travel behavior cannot evaluate properly due to lack of consideration for realistic travel behavior such as social path. In order to deal with this situation, this study analyzes the effect of social path at two complex centers in Seoul. Evaluation indices are service area analysis and urban network analysis which is one of the spatial network analysis. In particular, we subdivide the network into three steps by the level of network building and analyze each step. As a result, it is revealed that step three which includes social path shows the greatest improvement in pedestrian accessibility. In this regard, we confirm that social path should be considered when evaluating pedestrian accessibility in further studies. Furthermore, a lot of undervalued facilities will be re-appraised in the field of travel behavior.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.4 s.175
• /
• pp.1039-1046
• /
• 2000

This paper introduces the control and measurement of a double parallel robot manipulator applied for unknown geometric surface grinding. A measurement system is developed to recognize a grinding path by a vision camera and to observe a grinding load by a current sensor. With the measured fusion information, an intelligent controller identifies the unknown geometric surface and moves the robot along the grinding path with a constant grinding load.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.76-81
• /
• 1993

This paper presents an Auto-Drive-Guidance System which provides a path to the destination with the shortest driving distance(or time), as well as service information such as the location of gas stations, hospitals, or police stations. This system displays on the monitor screen the best driving path to the destination, points the current car position on the map, informs the driver of current position by voice whenever the car passes well-known places, or displays the map the driver wishes to view. With this system, driving becomes more comfortable, and traffic jams will be greatly reduced. As a result, gasoline consumption will be reduced and so air pollution. The system can also be applied to such areas as communication network, geographic map, and tour information.