• 한국정보전자통신기술학회논문지
• /
• 제16권6호
• /
• pp.434-440
• /
• 2023

본 논문에서는 교류 서보 전동기 PI 전류제어를 위한 주요 시스템 파라미터인 상저항과 상인덕턴스를 측정하는 방법을 제시한다. 서보 전동기 전류제어를 위한 PI 제어이득은 주요 계통 파라미터인 권선간 저항과 인덕턴스 정보를 활용하여 튜닝하는 자동적 방법이 기본적으로 사용된다. 본 연구에서는 이 두 파라미터를 3상 인버터 제어를 통해 계측하는 방법을 제시한다. 이 제어 및 계측 방법은 3상 인버터를 이용하여 3상 권선에 비례입력 만을 이용하는 스텝 전류제어를 수행하고 그 결과로 얻어진 출력 상전류를 측정함으로써 구현된다. 더불어 이 방법은 권선간 인덕턴스 계측을 위해 특정 스위칭모드에서의 인버터 자연-순환(freewheeling) 전류를 이용한다. 이 인버터 제어를 이용하는 측정 방법은 새로운 추가 계측 회로 및 복잡한 계측 알고리즘을 사용하지 않고 실시간으로 파라미터들을 계측 및 연산할 수 있는 해석적 방법이다. 실제 전동기 제어에 사용되어지는 구동기 회로를 그대로 사용하면서 스위칭소자의 도통저항과 각종 결선 저항을 포함하는 합성 저항 및 인덕턴스를 계측할 수 있는 방법이다.

• 대한기계학회논문집A
• /
• 제29권5호
• /
• pp.770-776
• /
• 2005

The gains fur NC controller parameter are fixed when the controller is combined with a machine. However, the characteristics of controller could be changed as it has being used by the machine or other environmental conditions. Those result in that the tool positioning accuracy is influenced. The loading torque in servo motor influences on the tool positioning accuracy and it is controlled by the parameter gains. It is required to analyze the torque variation with angular positioning accuracy of the servo motor. This study focus on a measuring method and device for verifying angular positioning accuracy of NC servo motor. We used a high resolution An converter for acquiring analogue signal of rotary encoder in servo motor. The positional accuracy for a nominal tool path, which is generated by the combination of axial movements (X,Y,Z), is analyzed with the servo motor torque. The current variation signal is acquired at the power line using a hall sensor and converted to the loading torque of servo motor. The method of measurement and analysis proposed in this study will be used for determining the gains of parameter in NC controller. This gain tuning is also necessary when the controller is set up at a machine.

• 한국수산과학회지
• /
• 제23권6호
• /
• pp.475-483
• /
• 1990

An assessment of Kuwait's commercial fish stocks: hamoor (Epinephelus tauvina), zobaidy (Pampus argenteus), nakroor (Pomadasys argenteus) and sheiry (Lethrinus nebulosus), was conducted using length-frequency data, mean growth and mortality estimates obtained during 1981$\~$1988. The length-cohort analysis indicated that increases in fishing effort would not lead to long-term gains in yield of the stocks at the current estimate of natural mortality rate (M). At high M which was assumed arbitrarily, some benefit in yield could be obtained, especially for hamoor and sheiry. At low M, the yield of all stocks decreased with increased fishing effort. Increases in fishing effort resulted in significant dec-line in spawning stock size for all the stocks. Yield-per-recruit analysis indicated that, un-der low M assumption, a higher yield can be obtained for zobaidy and nakroor by reducing fishing effort. At moderate M, decreases in fishing effort brought gains in yield per recruit of the stocks, but it was not substantial compared with the present level of M. At high M, most of the stocks reached the maximum yield-per-recruit. Overall, increased fishing effort either will not be associated with large long-term gains in yield or, in some stocks, might cause a decline from the present level.

• 소음진동
• /
• 제5권1호
• /
• pp.49-57
• /
• 1995

An electronic circuit device is developed such that the displacement between an electromagnet and a moving target can be estimated from the coil current measurement, and then applied to an active magnetic bearing system. In order to levitate the shaft without using displacement sensor the stable control gains are obtained from the linearized model which includes the gap estimation circuit. Experimental results show that the shaft, by the estimated gap feedback, can be levitated within $\pm$6 ${\mu}m$ positioning error.

• 대한전기학회논문지
• /
• 제34권7호
• /
• pp.283-288
• /
• 1985

This paper is concerned with the analysis of microprocessor-based PID control for the current source inverter-induction motor derive system. A linearized dynamic model of the motor is derived and is converted into the discrete-time model. With the equation, the overall system including the feedback loops is formulated into a single discrete-time state equation. The stability regions are determined at various values of controller gains. The transient responses of the motor speed are simulated by digital computer and are verified by laboratory experiments.

• 전력전자학회논문지
• /
• 제17권3호
• /
• pp.259-265
• /
• 2012

This paper introduces a method for design and implementation of a current controller for boost converter operating in continuous conduction mode (CCM) using a digital signal processor (DSP). A Proportional-Integral (PI) type current controller outputs an average voltage command for inductor, used in the input side of the boost converter, and the duty-ratio of PWM (pulse width modulation) signal for switching device is directly calculated from the average voltage command. The gains of the PI current controller are selected such that the current response characteristics are the same as those of a first-order low-pass filter. The proposed current control scheme is implemented using a DSP based on fixed-point math operations and an experimental study has been performed to validate the proposed method.

• Journal of Power Electronics
• /
• 제12권1호
• /
• pp.104-112
• /
• 2012

In this paper a new method for the design of a simple PI controller is presented and it has been applied in the control of a Boost based PFC rectifier. The Strength Pareto evolutionary algorithm, which is based on the Pareto Optimality concept, used in Game theory literature is implemented as a multi-objective optimization approach to gain a good transient response and a high quality input current. In the proposed method, the input current harmonics and the dynamic response have been assumed as objective functions, while the PI controller's gains of the PFC rectifier (Kpi, Tpi) are design variables. The proposed algorithm generates a set of optimal gains called a Pareto Set corresponding to a Pareto Front, which is a set of optimal results for the objective functions. All of the Pareto Front points are optimum, but according to the design priority objective function, each one can be selected. Simulation and experimental results are presented to prove the superiority of the proposed design methodology over other methods.

• Journal of Power Electronics
• /
• 제15권5호
• /
• pp.1358-1366
• /
• 2015

This study focuses on an advanced second-order sliding mode control strategy for a variable speed wind turbine based on a permanent magnet synchronous generator to maximize wind power extraction while simultaneously reducing the mechanical stress effect. The control design based on a modified version of the super-twisting algorithm with variable gains can be applied to the cascaded system scheme comprising the current control loop and speed control loop. The proposed control inheriting the well-known robustness of the sliding technique successfully deals with the problems of essential nonlinearity of wind turbine systems, the effects of disturbance regarding variation on the parameters, and the random nature of wind speed. In addition, the advantages of the adaptive gains and the smoothness of the control action strongly reduce the chatter signals of wind turbine systems. Finally, with comparison with the traditional super-twisting algorithm, the performance of the system is verified through simulation results under wind speed turbulence and parameter variations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 학술대회 논문집 정보 및 제어부문
• /
• pp.165-168
• /
• 2008

The experimental results of exposing IGBT (Insulated Gate Bipolar Transistor) samples to gamma radiation source show shifting of threshold voltages in the MOSFET and degradation of carrier mobility and current gains. At low total dose rate, the shift of threshold voltage is the major contribution of current increases, but for more than some total dose, the current is increased because of the current gain degradation occurred in the vertical PNP at the output of the IGBTs. In the paper, the collector current characteristics as a function of gate emitter voltage (VGE) curves are tested and analyzed with the model considering the radiation damage on the devices for gate bias and different dose. In addition, the model parameters between simulations and experiments are found and studied.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 춘계학술대회 논문집
• /
• pp.66-69
• /
• 2008

In this paper, The author present a load current feed-forward compensator by method that improve voltage controller of Step-down Chopper to get stable output voltage to sudden change of load current. To confirm the characteristicsof a presented load current feed -forward compensator compared each transfer function of whole system that load current feed-forward compensator is added with transfer function of whole system that existent voltage controller is included using Mason gains formula in Root locus and Bode diagram. As a result the pole of system is improved, extreme point of the wave and system improves, and size of peak value and phase margin of break frequency in resonance frequency confirmed that is good. Therefore, presented control technique could confirm that reduce influence by perturbation and improves stationary state and dynamic characteristics in output of Step-down Chopper.