• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.6-10
• /
• 2004

This paper newly proposes the SRM drive system based on DC-link current information, from which the phase currents can be estimated in accuracy and also they can be used in driving SRM instead of the phase currents. Comparing to the general drive system based on the phase current information, it is verified through the simulation(which are peformed by RMxprt and Simplorer) that the proposed SRM drive system has the good performance in dynamic and steady-state responses of the speed control. Using the DC-link current information, all of the multi-phase currents can be easily estimated in driving the SRM.

• 한국세라믹학회지
• /
• 제31권10호
• /
• pp.1133-1140
• /
• 1994

Nonlinear resonance characteristics of transverse type-PZT ceramic resonator were investigated, and their nonlinear coefficients were calculated using the nonlinear theory proposed by Duffing. Resonance characteristics of sample showed nonlinearity by the thermal effects due to driving current. Nonlinear coefficients greatly affected by sample dimension, however comparing with respect to current density, it was almost constant. Nonlinear coefficients were not changed as driving current increased upto 40 mA/$\textrm{cm}^2$, when $\alpha$ and $\beta$ was 920 and -10.6, respectively, while nonlinear coefficients exponentially increased beyond the current density of 40 mA/$\textrm{cm}^2$. Nonlinear coefficients were slightly increased as temperature increased.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.66-69
• /
• 2004

This work is the study of Voltage-Down Converter used as internal supply voltage having large current driving and stable voltage level at any variation of process, voltage, and temperature(P.V.T). It converts VDD(external supply voltage) into $V_{1NT}(internal\;supply\;voltage).$ From the simulation results, a new Voltage-Down Converter has large current driving and a little stand-by current under lower supply voltage than conventional circuit. And bad characteristic of VINT, peaking, was eliminated. Start-up circuit for BGR is also added to one circuit, which consumes less current dissipation than convention circuit

• 조명전기설비학회논문지
• /
• 제25권11호
• /
• pp.33-38
• /
• 2011

In this paper, the effect of pulse current and generated heat on characteristics of the LED is measured and evaluated. For experiments, the LED driving circuit and digital logic which determines period and duty ratio of lighting are designed. At rated current, the temperature and optical characteristics of the LED with change in duty ratio and period are compared, and those of the LED with change in duty ratio and existence of cooling fan are also compared at constant average current. As a result, frequency does not affect device temperature and optical characteristic of the LED but duty ratio does. Also, the cooling fan is less effective on those of the LED at rated current.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.22-23
• /
• 2006

A new current-driving pixel circuit for active-matrix organic light-emitting diodes (AMOLEDs), composed of four organic thin-film transistors (OTFTs) and one capacitor, is proposed using a current scaling method. Designing pixel circuits with OTFTs has many problems due to the instability of the OTFT parameters with still unknown characteristics of the material. Despite the problems in using OTFTs to drive the pixel circuit, our work could be set as a goal for future OTFT development. The simulation results show enhanced linearity between input data and OLEO luminescence at low current levels as well as successfully compensating the variation of the OTFTs, such as the threshold voltage and mobility.

• Applied Science and Convergence Technology
• /
• 제26권6호
• /
• pp.189-194
• /
• 2017

Effects of gas injection scheme and rf driving current configuration in a dual turn inductively coupled plasma (ICP) system were analyzed by 3D numerical simulation using CFD-ACE+. Injected gases from a tunable gas nozzle system (TGN) having 12 horizontal and 12 vertical nozzles showed different paths to the pumping surface. The maximum velocity from the nozzle reached Mach 2.2 with 2.2 Pa of Ar. More than half of the injected gases from the right side of the TGN were found to go to the pump without touching the wafer surface by massless particle tracing method. Gases from the vertical nozzle with 45 degree slanted angle soared up to the hottest region beneath the ceramic lid between the inner and the outer rf turn of the antenna. Under reversed driving current configuration, the highest rf power absorption region were separated into the two inner islands and the four peaked donut region.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.336-338
• /
• 2006

Motorized retractors enhance the safety of passengers by removing the slack of webbing and by holding upright driving position. Reliability of a driving mechanism that includes one-way clutch between the driving motor and webbing is directly linked to the safety of passenger. In this research, conditions for locking one-way clutch and also conditions for sustaining locking are theoretically investigated. the operation of a motorized retractor under realistic conditions is simulated in order to validate the proposed retractor design.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.729-733
• /
• 2003

Hybrid RMU is a kind of power circuit breaker and protects electric devices from over-current. In this paper we built a dynamic model of RMU driving mechanism using ADAMS and performed a optimal design of several design parameters. Finally we developed a prototype of RMU driving mechanism through results of analysis and confirmed it to satisfy design requisitions.

• 한국전기전자재료학회논문지
• /
• 제25권1호
• /
• pp.53-57
• /
• 2012

In this paper, by designing 20 W class driving circuit for driving high-power LED (Light Emitting Diode), we are going to comparatively carry out the analysis of characteristics for power circuit according to each design method. In this case, 200 V 60 Hz was performed as input data. The electrical characteristics such as voltage, current and ripple are checked for constant current circuit and constant voltage circuit in the LED module. In addition, as the ripple has an influence on illumination of LED light, low temperature working (-20 [$^{\circ}C$]) and high temperature working(80 [$^{\circ}C$]) are measured to make sure the ripple characteristics in accordance with temperature. In low temperature operation -20 [$^{\circ}C$] measurements, both constant current circuit and constant-voltage circuit were less impacted on input fluctuation, whereas in the high temperature operation 80 [$^{\circ}C$], current voltage in constant voltage circuit was surge after 430 [hour]. Voltage current ripple of constant current circuit was much less than constant voltage circuit, therefore we can show that constant current circuit is more stable.

• 한국전기전자재료학회논문지
• /
• 제32권1호
• /
• pp.40-46
• /
• 2019

To study the frequency response characteristics of alternating-current-driven organic light-emitting diodes (OLEDs), we fabricated blue-fluorescent OLEDs and analyzed their electroluminescent characteristics according to the alternating current voltage and frequency. The luminance-frequency characteristics of alternating-current-driven OLED was similar to that of a low-pass filter, and the luminance of high-voltage OLED decreased at higher frequency than low-voltage OLED. The luminance characteristics of the OLED according to the frequency is due to the capacitive reactance in the OLED, generated during the alternating current driving. The frequency response characteristics of the OLED according to the voltage is due to the decrease in internal resistance of the organic layer. In addition, the negative voltage component of the alternating current did not affect the frequency response of the OLED. Therefore, the electroluminescent characteristics of OLED with an alternating current power of 60 Hz are not influenced by the frequency.