• 전기학회논문지
• /
• 제67권12호
• /
• pp.1619-1625
• /
• 2018

Portable electronic devices secondary batteries can cause fire and explosion due to micro-current change in addition to the situation of short-circuit inrush current, safety can not be secured with a general operation limited current fuse. Therefore, in secondary battery, it is necessary for the protector to satisfy both the limit current type operation in the open-short-circuit inrush current and the current detection operation characteristic in the micro current change situation and for this operation, a fuse for the current detection type secondary battery protection circuit can be applied. The purpose of this study is to design a protection device that operates stably in the hazardous situation of small capacity secondary battery for portable electronic devices through the design of low melting fuse elements alloy of sensing type fuse and secures stability in abnormal current state. As a result of the experiment, I-T and V-T operation characteristics are satisfied in a the design of the alloy of the current sensing type self-contained low melting point fuse and the resistance of the heating resistor. It is confirmed that it can prevent accidents of short circuit over-current and micro current change of secondary battery.

• 정보처리학회논문지C
• /
• 제10C권6호
• /
• pp.665-674
• /
• 2003

이 논문에서는 침입 탐지 시스템의 탐지 효율을 높이기 위해 데이터 마이닝의 클러스터링 기법을 이용하여 경보 데이터를 그룹화하고 그 결과를 이용하여 경보 데이터의 상관 관계를 분석하는 방법을 제안하였다. 즉 클러스터링 기법을 이용하여 경보데이터를 사용자가 원하는 개수의 그룹으로 분류하고, 생성된 경보 데이터 클러스터 모델을 이용하여 새로운 경보 데이터을 분류할 수 있도록 하였다. 또한, 결과 클러스터의 생성 원인이 되는 이전의 경보의 분포 데이터를 저장 관리하여 클러스터 간의 시퀀스를 생성하였고, 생성된 각각의 클러스터 시퀀스를 통합하여 클러스터들의 시퀀스를 추출하여 발생한 경보 이후의 향후 발생 가능한 경보 타입을 예측하기 위한방법을 제공하였다. 이는 과거에 탐지된 공격의 형태 뿐만 아니라 새로운 혹은 변형된 경보의 분류나 분석에도 이용 가능하다. 또한 생성된 클러스터간의 생성 원인의 분석에 의한 클러스터 간의 순차적인 관계의 추출을 통해 사용자가 공격의 순차적 구조나 탐지된 각 공격 이면에 감추어진 전략을 이해하는데 도움을 주며 현재의 경보 이후에 발생 가능한 경보들을 얘측할 수 있다.

• Journal of Magnetics
• /
• 제20권3호
• /
• pp.312-316
• /
• 2015

Unlike conventional Eddy Current Test (ECT), Pulsed Eddy Current (PEC) uses a multiple-frequency current pulse through the excitation coil. In the present study, the detection of subsurface cracks using a specially designed probe that allows the detection of a deeper crack with a relatively small current density has been attempted using the PEC technique. The tested sample is a piece of 304 stainless steel (SS304) with a thickness of 30mm. Small electrical discharge machining (EDM) notches were put in the test sample at different depths from the surface to simulate the subsurface cracks in a pipe. The designed PEC probe consists of an excitation coil and a Hall sensor and can detect a subsurface crack as narrow and shallow as 0.2 mm wide and 2 mm deep. The maximum distance between the probe and the defect is 28 mm. The peak amplitude of the detected pulse is used to evaluate the cracks under the sample surface. In time domain analysis, the greater the crack depth the greater the peak amplitude of the detected pulse. The experimental results indicated that the proposed system has the potential to detect the subsurface cracks in stainless steel plates.

• 전력전자학회논문지
• /
• 제23권5호
• /
• pp.305-312
• /
• 2018

DC distribution systems has recently taken the spotlight. Concerns over human safety and stability facility are raised in DC distribution systems. Std. IEC 60479 provides basic guidance on "the effects of shock current on human beings and livestock" for use in the establishment of electrical safety requirements and suggests an electrical impedance of the human body. This study analyzes impedance spectrums based on the electrical equivalent impedance circuit for the human body; human body impedances measured by experiments are analyzed below the fundamental frequency (60 Hz). The analysis shows that the equivalent impedance circuit for the human body should be modified at least in low-frequency range below the fundamental frequency (60 Hz). The DC residual current detection method that can classify electric shock accidents of humans and electric leakages of facilities is proposed by applying the analysis result. The detection method is verified by experiments on livestock.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.38-43
• /
• 1994

In milling process, monitoring and diagosis system is very importent to accomplish factory automation. In this study, to drvelope on-line tool breakage detection system in face milling operation, analysis and experiment were performed. The tool breakage detection experiment was performed in machining center and the effectiveness of the detection tool breakage detection alorithm and the usage of feed drive current as a detection signal were verified.

• 한국소음진동공학회논문집
• /
• 제12권4호
• /
• pp.287-293
• /
• 2002

The unexpected failure of the induction motor makes the downtime of production, and the cost of the process cessation enormous. To reduce the downtime and increase the reliability of the motor, the vibration measurements for the fault detection have been used previously. Recently motor current signature analysis(MCSA) has been adapted for the fault detection and diagnosis of the motors. MCSA provides a powerful analysis tool for detecting the presence of mechanical and electrical faults in both the motor and driven equipment. In this paper, the fault severity of the rotor bar has been derived in terms of the resistance change which is calculated from the equivalent circuit model. Results show that the fault of the rotor can be easily detected and the measured value of the resistance change is verified by the detected fault from on-site tests using MCSA for the induction motors in an iron foundry.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제2C권5호
• /
• pp.262-267
• /
• 2002

In this paper, we first studied the factors affecting the motor current (MC) signal, which was strongly affected by the systematic hardware noises depending on polishing such as pad conditioning and arm oscillation of platen and recipe, head motor. Next, we studied the end point detection (EPD) for the chemical mechanical polishing (CMP) process of shallow trench isolation (STI) with reverse moat structure. The MC signal showed a high amplitude peak in the fore part caused by the reverse meal. pattern. We also found that the EP could not be detected properly and reproducibly due to the pad conditioning effect, especially when conventional low selectivity slurry was used. Even when there was no pad conditioning effect, the EPD method could not be applied, since the measured end points were always the same due to the characteristics of the reverse moat structure with an open nitride layer.

• 전력전자학회논문지
• /
• 제23권6호
• /
• pp.373-380
• /
• 2018

This study proposes a new islanding detection method that uses the phase shift of feed-forward voltage and evaluates the performance of an existing method and the proposed method when the grid frequency changes within the allowable range under steady-state conditions. The investigated existing method, which is slip mode frequency shift (SMS), uses current phase shift to detect islanding. The SMS method supplies reactive current to the grid under this condition, but the proposed method does not generate additional reactive power because it does not depend on the current control loop. The performance in steady-state grid condition is evaluated through simulations and experiments.

• 한국컴퓨터정보학회논문지
• /
• 제13권7호
• /
• pp.59-66
• /
• 2008

본 논문에서는 인스턴트 메시징(Instant Messaging), 채팅과 같은 텍스트 기반의 대화에서 현재 발화를 기준으로 대화의 주제를 파악하고, 대화 주제 전환 여부를 판단하는 기법에 대해 기술한다. 대화는 다른 종류의 글과 다르게 길이가 매우 짧아 적은 수의 단어를 사용하고, 두 사람 이상이 참여를 하며, 대화의 이력(History)이 현재의 발화에 영향을 미친다. 이러한 특성에 따라 본 논문에서는 사용자 발화 뿐 아니라 대화 상대자의 발화에서 추출한 키워드 기반으로 주제 탐지를 하며, 대화의 이력도 고려하여 대화 주제 탐지의 정확도를 높힌 연구 결과를 기술한다. 대화주제 전환 탐지는 이전 발화와 현재 발화에서 탐지된 주제의 유사성을 계산하여, 유사성이 낮은 경우에 전환 탐지가 이루어졌다고 판단하였다. 본 논문의 실험에서 대화 주제 탐지는 88.20%. 대화 주제 전환 탐지는 87.36%의 정확도를 얻었다.

• Corrosion Science and Technology
• /
• 제19권4호
• /
• pp.211-223
• /
• 2020

The external corrosion of buried piping can be controlled using both coating and cathodic protection. Several factors are involved in the damage and deterioration of the coating on pipes. There are many detection methods for coating defects on pipes and the direct current voltage gradient (DCVG) method is one of the most powerful methods. However, the detection reliability of DCVG can be affected by interferences such as stray current, metal objects connected to rectifiers, and copper grids. Therefore, this study focused on the interference effects of rectifiers and a copper grid on the reliability of coating flaw detection. As the length of the interference pipe connected to the rectifier increased, the reliability decreased. In contrast, as the distance between the pipe and the copper grid increased, the reliability of the coating flaw detection increased. The detection results produced by the DCVG method were discussed using current and potential simulations for a pipe with a rectifier and copper grid interference in the soil.