• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.475-478
• /
• 2006

Total primary production resulting from the photosynthetic process can be defined as the amount of organic matter produced in a given period of time. It is proportional to the chlorophyll-a (chl-a) values in the surface layer of the ocean. The MODIS board on Aqua satellite measures visible and infrared radiation in 36 wavebands, providing simultaneous images of chl-a concentration and sea surface temperature (SST) in the upper layer of the sea. The seasonal distribution of chl-a concentration during one year from April 2005 to March 2006 was examined. Light has a role of starting the seasonal cycle. The Kuroshio Current in this area induces many oceanographical features affecting to the change of seasonal control. The chl-a concentration is also seasonal, which is low in summer and high in winter. In summer, the meandering of Kuroshio Current induces strong eddies and increases the chl-a concentration. In autumn, the delayed small autumn bloom occurred until last December due to the Kuroshio Current. When the Kuroshio axis moves far from the coast, the coastal water dominates and increases the concentration even in the winter. The spring bloom starts early at the beginning of March and decreases during the spring.

• Journal of the Korean Society of Costume
• /
• v.46
• /
• pp.49-66
• /
• 1999

The bisexuality deconstructivity and diversity that are great characteristics on the comtemporary fashion are showed in the fashion collections. The purpose of this paper is to investigate and analyze the influence of these characteristics made by the post modern-feminism fashion through the cultural pattern analysis. The post modern-feminism was analyzed by dividing the cultural pattern into 1) the deconstructivity of androcentrism -This characteristic was presented in the costume design that breaks the basic from of the line color and quality of the material showing in men's clothes. 2) By rejecting main current fashion -Subculture style appeared in main current fashion the boundary of main and anti-main current fashion was vagued and the phenomena that the identity of subgroup was weakened were showed. 3) In the coexistence of double-sided value -This characteristic was presented in the cross-dressing fashion that cut away women's slender part and men's rough part. 4) In the open-minded thought of gender -This tendency was reached an extreme from excessive exposure to design which gives the sexual stimulus. This paper is expected to be helpful to understand the contemporary fashion by treating the cultural category associated with post-modern feminism in relation to contemporary fashion and to establish the direction of 21 century fashion.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.1
• /
• pp.57-63
• /
• 2015

Recently, LED is widely used in the kinds of display devices or lighting. In this paper, we fabricated LED chamber light for naval vessels to replace to conventional chamber light using incandescent lamp. The LED package of chamber light was designed with luminous intensity of 5.5 cd, color temperature of $6,000{\pm}500K$, forward voltage of 3~3.2 V and input current of 60 mA. A LED module was composed of 36 LED packages and metal PCB. The VF and luminous intensity of LED package were getting down when temperature increased. The temperature of LED chamber light was measured by changing the number of LED package and applied current for one hour when an electric current flow. The heat transfer capability have been improved by using metal PCB. The power consumption of LED chamber light reduced by 86% compared to the conventional chamber light using incandescent lamp.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.5
• /
• pp.291-296
• /
• 2000

Recently large size color TV and computer monitor are very popular and a lot techniques are being developed to get a high quality picture on the screen through reducing the convergence error among the red, green and blue beams and achieving a high focusing. One of the techniques is considering the mutual effects of the components of the Brown tube. The magnetic deflection yoke, especially, stands immediately next to the electron gun and generates the leakage magnetic fields at the electron gun which affects the trajectories of the electron beams inside the gun. Hence a shield cup made of thin conducting plate is located at the end of electron gun in order to shield the leakage flux from the deflection yoke. Since the red, green and blue beams are placed unsymmetrically the shielding effects of the shield cup on the beams are not same and eddy current controller, made of thin conducting plate, is auxiliary placed inside the shield cup. In this paper a transient magnetic field analysis algorithm is developed using boundary element method, and applied to the analysis of the shielding effects of the eddy current controller of shield cup in an electron gun.

• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.151-156
• /
• 2015

In order to improve the properties of high-temperature superconducting wire for superconducting cable system, we optimized the electro-polishing (EP), ion-beam assisted deposition (IBAD), superconducting (SC) layer, and baking (heat) treatment. The buffer layer was deposited on electro-polished substrate with RMS roughness ($R_{RMS}$) less than 5 nm. The IBAD process was carried out at $V_{beam}$: 1100 V and $V_{accel}$: 850 V that resulted in highly crystalline film of $LaMnO_3$. Chemical composition of SC layer is key to higher critical current, and we found that composition can be determined by surface color of SC layer. We adopt a proprietary contorl system based on RGB analysis of the surface and achieved critical current of 150 A/4 mm-width. The proposed baking treatment resulted in decreasing of about 10% of fraction defects.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.9
• /
• pp.49-56
• /
• 2004

A new readout circuit(ROIC) for linear HgCdTe 64${\times}$2 two-color Infrared (IR) detector is described. This circuit is based on the buffered direct injection(BDI) technology with high injection efficiency. By using saturation current isolation circuit, the proposed ROIC removed the problems that LWIR(Long Wavelength InfraRed) signal distort when MWIR(Middle Wavelength InfraRed) signal saturates so that new ROIC has larger measurable temperature range about 120k than that of previous circuit and it is also tolerant for dead pixel in MWIR detector. The designed circuit was fabricated using 0.6um 2-poly 3-metal CMOS process. We measured that the designed circuit outputs MWIR signal and LWIR signal simultaneously and saturation current isolationcircuit also operates well. Next, measured noise was about 53uV at room temperature and it can be assumed that designed circuit can satisfy nearly 95% BLIP condition at 77K.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.11
• /
• pp.704-710
• /
• 2015

We studied white organic light-emitting diodes using blue fluorescent and red phosphorescent materials. White single OLEDs were fabricated using SH-1 : BD-2 (3 vol.%) and CBP : $Ir(mphmq)_2(acac)$ (2 vol.%) as emitting layer (EML). The white single OLED using SH-1 : BD-2 (3 vol.% 8 nm) / CBP : $Ir(mphmq)_2(acac)$ (2 vol.% 22 nm) as emitting layer showed maximum current efficiency of 8.8 cd/A, Commission Internationale de l'Eclairage (CIE) coordinates of (0.403, 0.351) at $1,000cd/m^2$, and variation of CIE coordinates with ($0.402{\pm}0.012$, $0.35{\pm}0.002$) from 500 to $3,000cd/m^2$. The white tandem OLED using SH-1 : BD-2 (3 vol.% 12 nm) / CBP : $Ir(mphmq)_2(acac)$ (2 vol.% 18 nm) showed maximum efficiency of 19.6 cd/A, CIE coordinates of (0.354, 0.365) at $1,000cd/m^2$, and variation of CIE coordinates with ($0.356{\pm}0.016$, $0.364{\pm}0.002$) from 500 to $3,000cd/m^2$. Maximum current efficiency of the white tandem OLED was more twice as high as the single OLED. Our findings suggest that tandem OLED was possible to produce improved efficiency and excellent color stability.

• Korean Institute of Interior Design Journal
• /
• v.19 no.5
• /
• pp.11-20
• /
• 2010

User-oriented Design is necessary in planning the interior design of Metropolitan Railroads trains, since this is a typical means of transportation in this modem society and all ages people with different body scale use this facility. However, there are little studies about facility panning and zoning of Metropolitan Railroads train considering users. Therefore, in this study, after completing the checklist based on the current legal standards of facility installation of South Korea and Japan, we examined user's facility and suggest several improvement of the opening 14 metropolitan railroad lines in Seoul. Then, we evaluated this facilities according to 41 standards; general facility(24 standards), safety facility(4 standards), guide facility(11 standards), other facility(4 standards). The result of this study may be summarized as follows. 1) General facility has to be designed to obtain lots of room for storage and this facility should be fixed up tightly with secure system. 2) Safety facility should be designed to minimize a difference of floor-level between threshold of train and ground. Also, using various color and material could help passengers to distinguish different space and facility. 3) Guide facility should be designed to guide passengers to the accurate direction with proper sign design in the pathway of Metropolitan railroad train. Also, more various color, which based on the research about physiological and psychological effect, should be used to guide people. 4) Other facility should equip more visual system using common good and informative contents. Through this study, we try to understand the current interior physical condition of Metropolitan Railroads trains. However, for future studies, it is expected to supplement evaluation standards considering aesthetic design, environmental improvement of indoor air quality and the satisfaction and demand of Metropolitan Railroads trains.

• International Journal of Costume and Fashion
• /
• v.7 no.1
• /
• pp.22-31
• /
• 2007

The systematic study of the future began with curiosity and imagination about the future; a unique trait of human mental effort-and this seems to be based on the idea that the future can be different depending on current choices or effort. In this sense, it would be seemly to encourage more interest and academic study on the progress of future fashion. In this study, we examine recent changes of fashion material; e.g. that which science and technology have more impact and importance in futuristic fashion since the 1990�s. The period analysed is from the1990's to the present and related data from recent fashion collections and fashion books has also been included The current prediction of the future is largely based on what was formed between the 19th Century and the 20th Century which has persisted until now and has been influenced by the view that science will play a bigger role in the future. This is especially reflected in fashion which chiefly represents material culture. New materials used for fashion are strong and permanently durable, in addition to being very light, thin, flexible, hygienic, ecological and comfortable to wear-almost like a second skin. These fashionable new materials roughly function in two different ways according to external and internal characteristics. First, they cause external change. Second, they exemplify or allow new functions. Examples of external change are the use of silver color, achromatic color, metallic material, smooth-to-the-touch shiny material and the use of luminous material. Examples of the extended function of clothing through the use of new materials are the use of conducting thread, the use of special material for blocking & opening and the use of material which changes colors as the surroundings change. These days, the use of new material which changes its appearance is a novelty unique to the fashion world but we also expect to witness the debut of diverse new materials with extended inner functions.

• The Journal of the Korea Contents Association
• /
• v.11 no.1
• /
• pp.113-122
• /
• 2011

Visual images are very close to our living and we make decisions and choose behavioral options with the visual images on mass media. In current-affair documentary programs, interviews have potential effects that can change public opinions on important issues. Therefore, it's a consequence that the study examined how different expressions of visual images in documentary. Using preceding research methods, this study focus on form, color, movement and depth of visual images. This study analyzed quantitatively all interview shots with 15 current-affair documentary programs from major TV stations such as KBS, MBC and SBS. The findings of the study are 1) half of interview shots used the visual image expressions to hide interviewees' face according to the shield law, 2) choosing close-up shots in company with bust shots, 3) using natural lights and hand-held camera techniques for interviews, and 4) showing wide angles without depths of visual image.