• Clinical and Experimental Pediatrics
• /
• v.61 no.12
• /
• pp.381-386
• /
• 2018

Purpose: The use of proper safety restraint systems by children is vital for the reduction of traffic accident-related injury and death. This study evaluated the rates of use of safety restraint systems and front seats by Korean children. Methods: Based on data from the National Health and Nutrition Examination Survey from 2008 to 2015, I investigated the frequencies of safety restraint systems and front seat use by children under six and 12 years of age, respectively. Results: The percentage of respondents who said they always use safety restraint systems increased from 17.7% in 2008 to 45.0% in 2015. The rate of children who did not use the front seats at all was 47.3 % in 2008 compared to 33.4% in 2015. Multivariate logistic regression analysis showed a decrease in safety-restraint-system use as age increased (odds ratio, 0.63; 95% confidence interval [CI], 0.51-0.77). The use rate of front-passenger seat belts by the mother is significantly correlated with the safety-restraint-system use rate by children (odds ratio, 2.14; 95% CI, 1.12-4.06). Conclusion: Although the rate of safety-restraint-system use for children is increasing annually, it remains low. Additionally, the use rate of front passenger seats for children is high. To reduce the rates of injury and death of children from traffic accidents, it is necessary to educate on the appropriate use of safety restraint systems according to age and body size and to develop stronger regulations.

• Fashion & Textile Research Journal
• /
• v.22 no.6
• /
• pp.826-833
• /
• 2020

When it is necessary to wear masks for long periods, such as during the current COVID-19 pandemic, the essential function of masks to prevent contamination (or transmission to others) as well as comfortableness are important. For this study, we used three-dimensional (3D) facial measurements of adult women to compile basic face shape data for designing comfortable and effective masks. This study analyzed the 3D facial data of 127 subjects in their 20s to 30s of the 6th Size Korea. Factor analysis of the survey data produced seven factors that formed the composition of adult female faces. These factors combined to produce three facial types: square (long face and a large lower middle face), oval (smallest central and lower body in the middle), and triangle (short face with a small central and lower large nose). These types reflect that the facial types of adult women show the differences in the nose angle, nose length, bitragion-subnasal arc, bitragion-menton arc. Therefore, properly fitting masks for fine dust particle filtration require 3D customization of a mask's breathing apparatus to fit differently shaped central and lower face parts that interfere with mask fit.

• Journal of radiological science and technology
• /
• v.44 no.6
• /
• pp.615-621
• /
• 2021

In the medical field, radiation provides information for the diagnosis and treatment of diseases. As the use of radiation increases and the risk of exposure increases, interest in radiation protection is also rapidly increasing. Lead shielding material is mainly used, which has a risk of lead poisoning and absorption into the body. Tungsten mixed filament shielding sheets were fabricated with a size of 70 × 70 mm and a thickness of 1, 2, and 4 mm by using a 3D printer. In the general shooting experiment, the thickness of the shielding sheet is 1 ~ 5mm, the tube voltage is 60, 80, 100, 120 kVp and the tube current is 20, 40 mAs. In general photography, Tungsten showed better shielding rate compared to Brass, Copper, and Lead protective tools under all irradiation conditions, and in particular, Tungsten 5 mm showed 100% shielding rate. The 3D-printed tungsten mixed filament shielding is expected to be used as a new shield that can replace the existing lead protection tools as it shows a better shielding rate than the existing lead protection tools in Radiography.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.46 no.2
• /
• pp.199-218
• /
• 2022

Considering increasing demand for improved waist protectors for the elderly, in this study we sought to design a waist protector that reflects the body characteristics, preferences, and satisfactions of the elderly. A survey conducted to investigate elderly satisfaction with existing waist protectors, as well as their preferences in product function, design, and characteristics, found that consumers are not satisfied with current waist protector offerings and would prefer protectors that allow greater freedom to perform physical activities and that are more easily accessible. Based on the survey, we developed a guideline on function, design, and characteristics, resulting in four new waist protector designs: A and B for men, and C and D for women. Significant preference differences according to gender were reflected in the designs. For example, designs for female waist protectors focused much more on improving tightness, size, freedom of movement, and easy attachment or detachment than designs for male waist protectors did. Evaluation of satisfaction with new designs suggests that new designs meet the satisfaction criteria of elderly consumers, who express willingness to purchase and use them.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.2
• /
• pp.353-368
• /
• 2023

The four wing unmanned aerial vehicle owns the characteristics of small size, light weight, convenient operation and well stability. But it is easily disturbed by external environmental factors during flight with these disadvantages of short endurance and poor attitude solving ability. For solving these problems, a microprocessor based on STM32 chip is designed and the overall development is completed by the resources such as built-in timer and multi-function mode general-purpose input/output provided by the master micro controller unit, together with radio receiver, attitude meter, barometer, electronic speed control and other devices. The unmanned aerial vehicle can be remotely controlled and send radio waves to its corresponding receiver, control the analog level change of its corresponding channel pins. The master control chip can analyze and process the data to send multiple sets pulse signals of pulse width modulation to each electronic speed control. Then the electronic speed control will transform different pulse signals into different sizes of current value to drive the motor located in each direction of the frame to generate different rotational speed and generate lift force. To control the body of the unmanned aerial vehicle, so as to achieve the operator's requirements for attitude control, the PID controller based on Kalman filter is used to achieve quick response time and control accuracy. Test results show that the design is feasible.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.3
• /
• pp.77-82
• /
• 2022

In Bangladesh, developing students' entrepreneurial intentions have received a lot of attention because of the country's current employment predicament and shifting labor market. Entrepreneurs play a critical part in a country's economic development. This study aims to examine the impact of creativity and innovation on students' intentions toward online entrepreneurship in Bangladesh. The participants in this study were Bangladeshi university students. Based on pre-tested constructs, a survey questionnaire was created. Convenience sampling, which is a common type of non-probability sampling, was used to choose participants for the sample. A total of 150 students from the public university took part in the survey, with 120 replies being accepted as complete, resulting in an 80 percent response rate. Hence, the sample size is 120. Internal consistency was determined using Cronbach's alpha, while correlation and hypothesis tests were analyzed using SPSS version 26.0. The results reveal that creativity and innovation have a statistically significant and positive impact on students' intentions to engage in online entrepreneurship. These two independent factors explained 75% of the variance in intention to engage in online entrepreneurship, resulting in empirical findings and solid information in the present body of knowledge. The study concludes with a conclusion and research implications for the future.

• Journal of Radiation Protection and Research
• /
• v.49 no.1
• /
• pp.1-18
• /
• 2024

Exponential growth has been observed in nuclear medicine procedures worldwide in the past decades. The considerable increase is attributed to the advance of positron emission tomography and single photon emission computed tomography, as well as the introduction of new radiopharmaceuticals. Although nuclear medicine procedures provide undisputable diagnostic and therapeutic benefits to patients, the substantial increase in radiation exposure to nuclear medicine patients raises concerns about potential adverse health effects and calls for the urgent need to monitor exposure levels. In the current article, model-based internal dosimetry methods were reviewed, focusing on Medical Internal Radiation Dose (MIRD) formalism, biokinetic data, human anatomy models (stylized, voxel, and hybrid computational human phantoms), and energy spectrum data of radionuclides. Key results from many articles on nuclear medicine dosimetry and comparisons of dosimetry quantities based on different types of human anatomy models were summarized. Key characteristics of seven model-based dose calculation tools were tabulated and discussed, including dose quantities, computational human phantoms used for dose calculations, decay data for radionuclides, biokinetic data, and user interface. Lastly, future research needs in nuclear medicine dosimetry were discussed. Model-based internal dosimetry methods were reviewed focusing on MIRD formalism, biokinetic data, human anatomy models, and energy spectrum data of radionuclides. Future research should focus on updating biokinetic data, revising energy transfer quantities for alimentary and gastrointestinal tracts, accounting for body size in nuclear medicine dosimetry, and recalculating dose coefficients based on the latest biokinetic and energy transfer data.

• Korean Journal of Veterinary Research
• /
• v.64 no.2
• /
• pp.12.1-12.6
• /
• 2024

The current study aimed to determine the effect of silver and chitosan nanoparticles of size 10 to 30 nm on the dead of lice in vitro and in vivo to determine the optimal time and concentration to combat chicken lice. One hundred local chickens Gallus gallus domesticus were collected from Al-Diwaniyah province and 6 species of local chicken lice were isolated: Menacanthus stramineus, Menacanthus pallidullus, Menacanthus cornutus, Goniodes gigas, Cuclotogaster heterographus and Bonomiella columbae. The results of treating lice with chitosan and silver nanoparticles at concentrations (40, 60, and 80 mg/mL) in vitro and at different periods (5, 10, 15, and 30 minutes) after treatment showed that chitosan and silver nanoparticles at a concentration of 80 mg/mL are the most effective in killing lice. The dead rate of lice reached 100% after 15 minutes of treatment with chitosan nanoparticles and 100% in the case of silver nanoparticles after 30 minutes. The results of spraying chitosan and silver nanoparticles on the body of chickens infected with lice experimentally, based on the relative therapeutic efficacy within 30 minutes, indicated that silver nanoparticles were the most effective in completely killing lice in the group treated with a concentration of 80 mg/kg after 30 minutes, where the percentage of therapeutic efficacy was 96.7%. This was followed by chitosan nanoparticles at a concentration of 80 mg/kg, and the percentage of therapeutic efficiency was 91.5%. Chitosan and silver nanocomposite have a promising effect in the elimination of lice infestation in chickens.

• Journal of Fashion Business
• /
• v.10 no.2
• /
• pp.83-98
• /
• 2006

With the subjects of male consumers in their 20s to 40s living in the Ningbo area in Zhejiang Province, this study aims to investigate into the reality of their purchase attitude and size fitness of ready-made suits. The results are as follows; Looking into their demographic characteristics, 70.6% of the subjects were twenties, 60.6% were single, and educational career stood in the order of college, middle school, and high school graduation. They were largely absorbed in free trade, followed by teaching, commerce and service industry. 59.6% of them were Zhejiang Province belongs. One to two thousand yuan was the greatest portion of their monthly income. As for their purchase attitude of ready-made suits, they thought higher of material, quality, activity, and solidity than of design. They preferred to buy clothes at a department store. There was significant difference between purchase frequency and purchase price according to monthly income and jobs. Concerning brand recognition, the Chinese subjects favored "Youngor." Though Korea's brands were very lowly recognized, Korean products received really high recognition. Compared with China's brands, they found foreign brands excellent in design, followed by material/matter, wear, and sewing. As to their physical satisfaction and the size fitness of clothes, most subjects felt happy with their sizes. Trousers and jackets were among the unfitting suit items, while the girth of waist was the least satisfactory size. Therefore, in order to raise the market occupation rate of Korean suit goods in China, more aggressive marketing strategies are required to utilize the current Korean-style entertainment and maximize concerning brand images. In particular, outstanding products in consideration of prices should be made through the proper patternmaking to reflect the body types of the Chinese.

• Journal of the Korean Society of Radiology
• /
• v.17 no.1
• /
• pp.167-173
• /
• 2023

X-ray general radiography is the simplest and most important one to get a lot of information. Nevertheless, current x-ray general radiography does not observation in-depth observation. Information about the anatomy of the human body and changes in disease in x-ray general radiography can be obtained but it is difficult to determine the size and shape of the actual lesion due to the disadvantage of expanding the image. In this study, PA and LAT images were acquired and cancer magnification was calculated in the images by measuring the distance of cancer samples. By adjusting the magnification the actual cancer length and thickness were measured and compared with the CT image and the actual cancer sample size. After the PA and LAT images of the inserted 6.0 mm cancer sample were obtained and the magnification was corrected, the length was 5.9 mm and the thickness was 6.1 mm. This value was measured similarly to the actual. The problem of obtaining the magnification that needs to know the actual length from the detector to the cancer sample was secured by obtaining the magnification through PA and LAT images and it is possible to accurately measure the cancer sample size. X-ray general radiography may provide useful information in situations where CT imaging is difficult.