• 마이크로전자및패키징학회지
• /
• 제13권3호
• /
• pp.39-45
• /
• 2006

다양한 에폭시 수지를 함유한 언더필의 열적 특성을 시차주사열량측정법, 열중량측정법, 동적-기계적 분석법, 열적-기계적 분석법과 같은 열 분석법을 이용하여 분석하였다. 또한, 언더필과 FR-4기판 사이의 접합 강도를 측정하였다. Cycolaliphatic 에폭시 수지를 함유한 언더필의 유리 전이 온도가 cycolaliphatic 에폭시 수지를 함유하지 않은 언더필의 유리 전이 온도보다 낮음을 확인할 수 있다. 대기로부터 유입된 산소와 열화된 폴리머 사이의 화학적 반응으로 인하여 언더필의 열적 감소 반응이 두 번 발생하는 것을 확인할 수 있다. Cycolaliphatic 에폭시 수지를 함유한 언더필의 열팽창 계수가 cycolaliphatic 에폭시 수지를 함유하지 않은 언더필의 열팽창 계수보다 높음을 확인할 수 있다. 과도한 경화 온도는 에폭시 수지의 경계면을 약하게 하여 에폭시 수지의 기계적 특성의 변화를 초래하게 되고 언더필과 FR-4 기판 사이의 접합 특성을 저하시키게 된다.

• 한국전기전자재료학회논문지
• /
• 제25권6호
• /
• pp.420-425
• /
• 2012

Lead-free piezoelectric ceramic/epoxy composites with '0-3' connectivity were prepared by cold-pressing with a temperature controlled curing method. A ceramic powder with a composition of $(Na_{0.51}K_{0.47}Li_{0.02})(Nb_{0.8}Ta_{0.2})O_3$ was synthesized by a conventional solid state reaction route. The dielectric and piezoelectric properties of ceramic/epoxy composites were characterized as a function of the volume fraction (${\phi}$) of piezoelectric ceramics, which was varied from 70 to 95 vol%. The results indicated that the piezoelectric properties of composites were significantly affected by the volume fraction of ceramics. In terms of the piezoelectric properties, specimens showed the best performance at ${\phi}$= 85 vol%, resulting in the piezoelectric constant $d_{33}$ of 39 pC/N and the figure of merit as a piezoelectric energy harvester ($d_{33}{\cdot}g_{33}$) of 1.24 $pm^2/N$.

• The Journal of Advanced Prosthodontics
• /
• 제10권5호
• /
• pp.381-387
• /
• 2018

PURPOSE. Cement-retained implant prostheses can lack proper retrievability during repair, and residual cement can cause peri-implantitis. The purpose of this in vitro study was to evaluate the influence of abutment height and convergence angle on the retrievability of cement-retained implant prostheses with lingual slots, known as retrievable cement-type slots (RCS). MATERIALS AND METHODS. We fabricated six types of titanium abutments (10 of each type) with two different heights (4 mm and 6 mm), three different convergence angles ($8^{\circ}$, $10^{\circ}$, and $12^{\circ}$), a sloped shoulder margin (0.6 mm depth), a rectangular shape ($6mm{\times}6.5mm$) with rounded edges, and a rectangular ledge ($2mm{\times}1mm$) for the RCS. One monolithic zirconia crown was fabricated for each abutment using a dental computer-aided design/computer-aided manufacturing system. The abutments and crowns were permanently cemented together with dual-curing resin cement, followed by 24 hours in demineralized water at room temperature. Using a custom-made device with a slot driver and torque gauge, we recorded the torque ($N{\cdot}cm$) required to remove the crowns. Statistical analysis was conducted using multiple regression analysis and Mann-Whitney U tests (${\alpha}=.05$). RESULTS. Removal torques significantly decreased as convergence angles increased. Multiple regression analysis showed no significant interaction between the abutment height and the convergence angle (Durbin-Watson ratio: 2.186). CONCLUSION. Within the limitations of this in vitro study, we suggest that the retrievability of cement-retained implant prostheses with RCS can be maintained by adjusting the abutment height and convergence angle, even when they are permanently cemented together.

• 대한토목학회논문집
• /
• 제33권3호
• /
• pp.909-916
• /
• 2013

저온에서 소성된 산화마그네슘 분말을 치환한 MgO 콘크리트는 장기적인 팽창성을 가진다. 또한 MgO의 수화반응이 느린 속도로 장기재령까지 일어나기 때문에 매스콘크리트의 온도수축을 효과적으로 보상할 수 있다. 따라서 저온 소성한 MgO는 매스콘크리트 구조물인 댐에 주로 적용되었다. 최근 수화열 저감을 위해 매스콘크리트에 많이 사용되는 플라이애시를 사용한 MgO 콘크리트의 팽창특성에 대한 연구가 진행되어 왔지만 이러한 콘크리트의 내구성에 관한 연구는 부족한 실정이다. 이 연구에서는 플라이애시 콘크리트에 저온 소성한 MgO 분말을 치환하여 MgO 분말 치환에 따른 장기재령에서의 내구특성을 확인하였다. 재령 360일까지 20, $50^{\circ}C$에서 수중 양생을 실시한 후 탄산화, 동결융해 및 염화물 확산, 황산염 침투 저항성을 평가하였다. 실험결과, MgO 분말을 치환한 시편에서 탄산화 저항성 및 염해 저항성, 황산염 침투 저항성이 다소 향상되는 것을 확인하였다. 반면 동결융해 저항성은 MgO 분말 치환에 거의 영향을 받지 않았다.

• 한국응용과학기술학회지
• /
• 제11권2호
• /
• pp.69-74
• /
• 1994

Durable softening water repellents for nylon fiber were synthesized, using two compounds: quaternized octadecyl methacrylate-2-diethylaminoethyl methacrylate copolymer as a mother resin of water repellent and quaternized fatty carbamide for improving softness and hydrostatic pressure, of which syntheses were studied in the previous papers. They were blended with waxes and emulsifiers in a variety of ratios and synthesized into water repellent PADWC, and it was nylon taffeta treated with and without textile finishing resin. The synthesized water repellents can be used either or without resin. The optimum curing temperature was 150 to 160$^{\circ}C$ and the optimum concentration was 3 to 5wt%. In the independent and conjunct treatment, the water repellency of nylon taffeta samples have no remarkable changes between initial value and that after three times washing, so these prove that the synthesized compounds are durable water repellent. The water repellency of PADWC-3 and -4 were around 90. Also, comparison of crease recovery and tear strength after repelling treatment showed that the synthesized water repellents have a very high softening effect.

• Fisheries and Aquatic Sciences
• /
• 제3권3_4호
• /
• pp.200-204
• /
• 2000

To investigate pre-salting conditions in the preparation of salted anchovy from large anchovy, anchovy were salted with various salt concentration and stored at $5^{\circ}C$ and $20^{\circ}C$ for 10 days. Moisture content decreased with the increase of salt and the salinity increased in proportion to salt concentration at $20^{\circ}C$. Total nitrogen decreased slightly as the increase of salt concentration during pre-salting at $20^{\circ}C$. The nitrogenous components such as amino nitrogen and extractable nitrogen were invariable or decreased until 7 days in salt concentration over $25\%$ during pre-salting at $5^{\circ}C$. These results imply that soluble nitrogen with moisture run out of anchovy body in high salt concentration and the hydrolysis was inhibited by salt over $25\%$ at $5^{\circ}C$. VBN content were constant in salt concentration over $25\%$ until 7 days, regardless of curing temperature. The POV were under the influence of salt concentration and temperatures. We concluded that the optimal condition for preparation of salted anchovy were pre-salting with salt over $25\%$ at $5^{\circ}C$ for 7 days.

• 한국연초학회지
• /
• 제17권2호
• /
• pp.126-138
• /
• 1995

To investigate the changes of physicochemical properties of leaf tobacco during storage, cured leaves (both flue-cured(KF109) and burley(Burley 21) : 4 grades of leaves) were stored under the natural warehouse condition(room temperature) and processed leaves(both Rue-cured(NC82) and burly(Burley 21) : 6 grades of leaves) were stored at storerooms in tobacco processing plants(flue-cured Cheongju plant ; 2nd, 4th and 5th floor, burley : Kwangju plant ; 2nd floor, Chonju plant : 3rd and 5th floor). Tobacco leaves were sampled and analyzed every 3 months. Total sugar content of flue-cured leaf decreased slightly and the redness degree of leaf increased after 15 months' storage under the natural warehouse conditions. The pH of cured leaves were lowered both flue-cured and burley, and the decreasing rate of pH was large in flue-cured(0.24) as compared with burley(0.14). There was no significant differences of physicochemical properties of processed leaf among storerooms during 15 months' storage. The decreasing rate of processed leaf pH was somewhat large in flue-cured(0.26) as compared with burly (0.20), and in thick leaves as compared with thin leaves. The redness degree of flue-cured leaf increased slightly, while the degree of lightness and yellowness lowered slightly during storage. The lightness degree of burley leaf lowered slightly, too. The ageing process of cured leaf was similar to that of processed leaf, it is considered that the passing days after curing will be more reasonable than the passing days after processing for the establishment of proper ageing period.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.280-280
• /
• 2010

Semiconductor quantum dots are of great interest for both fundamental research and industrial applications due to their unique size dependant properties. The most promising application of colloidal semiconductor nanocrystals (quantum dots or QDs) is probably as emitters in biomedical labeling, LEDs, lasers etc. As compared to II-VI quantum dots, III-V have attracted greater interest owing to their less ionic lattice, larger exciton diameters and reduced toxicity. Among the III-V semiconductor quantum dots, Indium Phosphide (InP) is a popular material due to its bulk band gap of 1.35 (eV) which is responsible for the photoluminescence emission wavelength ranging from blue to near infrared with change in size of QDs. Nevertheless, in recent years, the exact type of collective properties that arise when semiconductor quantum dots (QDs) are assembled into two- or three-dimensional arrays has drawn much interest. The term "uantum dot solids" is used to indicate three-dimensional assemblies of semiconductor QDs. The optoelectronic properties of the quantum dot solids are known to depend on the electronic structure of the individual quantum dot building blocks and on their electronic interactions. This paper reports an efficient and rapid method to produce highly luminescent and monodisperse quantum dots solution and solid through fabrication of InP thin films. By varying the molar concentration of Indium to Ligand, QDs of different size were prepared. The absorption and emission behaviors were also studied. Similar measurements were also performed on InP quantum dot solid by fabricating InP thin films. The optical properties of the thin films are measured at different curing temperatures which show a blue shift with increase in temperature. The dielectric properties of the thin films were also investigated by Capacitance-voltage(C-V) measurements in a metal-insulator-semiconductor (MIS) device.

• 대한미생물학회지
• /
• 제21권1호
• /
• pp.33-45
• /
• 1986

On hundred and forty stains of shigella cultures isolated from the twelve hygiene laboratories of cities and provincial general hospital laboratories in 1983 were tested for their resistance to thirteen antimicrobial drugs and their R-plasmid transfer. Antimicrobial drugs were used amikacin, ampicillin, cephalothin, chloramphenicol, gentamicin, kanamycin, nalidixic acid, rifampicin, streptamycin, tetracycline, tobramycin, cefoperazone and piperacillin. All strains were resistant to one or more of thirteen antimicrobial drugs but 94.3% were susceptible to amikacin, gentamicin and tobramycin of total isolated. The most strains commonly found resistance was to chloramphenicol (94%) followed by streptamycin (93%), tetracyline (92%) piperacillin (90%) ampicillin (83%), cefoperazone (42%), nalidixic acid (14%), cephalothin (17%), rifampicin (22%) and kanamycin (6%), sixty percent of strains among 140 were resistance to ampicillin, chloramphenicol, streptomycin, tetracycline at the same time. The transfer of drug resistance by conjugation was tested and ninety four strains (94.3%) were resistant to one or more drugs were found to transfer their drug resistance of E. coli. percentage of transfer frequency by conjugation was one strains (54%), the transfer frequency of drug resistance varied by donor strains and recipients, but not by selecting drugs. Resistance to nalidixic acid was not transferred by conjugation to recipients. Percentage of plasmid curing after the treatment of acriflavine, acridine orange was about 8%. Among strains cured two strains were tested compare original strains with them in biochemical properties in arginine dihydrolase and arabinose fermentation reaction. It was found to growth curves of No.2 shigella flexneri, serotype 1b, and its derivatives cured with acriflavine in $M{\ddot{u}}ller$ Hinton broth medium (pH 7.4, $38^{\circ}C$) by temperature Gradient Biophoto Recorder TN-1120 (Tokyo, Japan).

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.35-38
• /
• 2006

This study investigated fundamental properties of lightweight foamed concrete using cement kiln dust (CKD) and both fly ash(FA) and stability agent. Test results showed that concrete incorporating more amounts of admixture decreased slump flow and it caused increase of superplasiticizer in order to secure the fluidity performance. In addition concrete adding stability agent showed stable flow state, resisting segregation of materials and decreasing bleeding capacity. Sinking depth of concrete incorporating 20% of CKD and adding 0.002% of stability agent was indicated at 0mm. For the properties of hardened concrete. compressive strength of concrete incorporating CKD declined due to a lower appearance density, compared with other specimens. The difference of that was not very significant and the value of ail specimen was higher than KS range. Moreover strength of concrete incorporating CKD was even higher at curing temperature $5^{\circ}C$. Tensile strength ratio of concrete incorporating CKD was indicated between 0.50 to 0.59, which is higher value than control concrete. Heat conductivity of concrete incorporating FA was under the KS range while concrete incorporating 20% of CKD was satisfied in KS. Concrete adding stability agent improved insulation performance due to the lower heat conductivity. In conclusion, it is possible that concrete incorporating 20% of CKD and adding 0.002% of stability agent can secure high quality of lightweight foamed concrete.