• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.11a
• /
• pp.5-8
• /
• 2006

This study investigates the field application, Songdo the # 1st WORLD, on zero-crack construction of the fundamental mass concrete using double bubble sheets and applying low heat mixture. Experimental results of hydration heat analysis showed that crack modulus of concrete incorporating 20% of blast furnace slag cement was 1.0 in 120 hours, representing 50% probability of crack occurrence, thus requiring additional measures. As for a curing method, a specimen insulating two layers of vinyl chloride+double bubble sheets exhibited only $16.5^{\circ}C$ difference between upper and lower sections, and it also showed favorable workability as well as competitive economic side. Therefore it was determined to use it for curing method in this field. For the curing results of practical field, using 2 layers of vinyl chloride+double bubble sheets and applying low heat mixture on the fundamental mass concrete in 3A residential building exhibited less than only $15^{\circ}C$ difference between surface and center section of that in 5 days elapse and less than $20^{\circ}C$ in 9 days. This means that the crack by hydration heat was prevented, and other fields structures also resisted the plastic shrinkage by insulating the vinyl, sinking crack by second temping, even drying shrinkage by the mixture of low unit water. Therefore the crack on the placement has not been found so far, since the construction was started before 6 month.

• Geotechnical Engineering
• /
• v.7 no.4
• /
• pp.49-64
• /
• 1991

Abstract The stabilization by lime or Portland cement has long been the most commonly used methods for clay soil. But it wart the purpose of this reserch to define the effectiveness malt content on unconfined compressive strength of limeflay mixture and cementrlay mixture. From result of a laboratary investigation, saInt content in sample soil was not concernd with variation of PH value. PH value of lime 10% mixture and of cement 10% mixture were near 12.4, 11.6 respectively. In case of more than 7 curing days, PH value and Ca++ion concentration were decreased with increasing curing time. Also the result of X-ray difflection analysib for stabilized soil by admixture 10% in 90 curing days showed that the diffrection intensity of Tobermorite and Ettringite and other reaction products was smaller in the case of addition of salt 8% than malt 0% in stabilized soil. When lime-soil mixture and cement-boil mixture were cured in 2$0^{\circ}C$ and 5$^{\circ}C$, 2$0^{\circ}C$ cured mizture produced significantly higher compressive strength than 5t cured mixture and air dry curing sample produced higher than cured sample in water. The addition of salt 2~4% in conjuntion with lime or cement may accelerate strenth gain or not prevent front However, the addition of salt 8% prevent from strength gams.

• Geomechanics and Engineering
• /
• v.12 no.6
• /
• pp.935-948
• /
• 2017

An experimental program was conducted to investigate the effects of the static compaction pressure, cement content, water/cement ratio, and curing time on unconfined compressive strength (UCS) of the cement treated sand. UCS were conducted on samples prepared with 4 different cement/sand ratios and were compacted under the lowest and highest static pressures (8 MPa and 40 MPa). Each sample was cured for 7 and 28 days to observe the impact of curing time on UCS of cement treated samples. Results of the study showed the unconfined compressive strength of sand increased as the cement content (5% to 10%) of the cement-sand mixture and compaction pressure (8 MPa to 40 MPa) increased. UCS of sand soil increased 30% to 800% when cement content was increased from 2.5% to 10%. Impact of compaction pressure on UCS decreased with a reduction in cement contents. On the other hand, it was observed that as the water content the cement-sand mixture increased, the unconfined compressive strength showed tendency to decrease regardless of compaction pressure and cement content. When the curing time was extended from 7 days to 28 days, the unconfined compressive strengths of almost all the samples increased approximately by 2 or 3 times.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.11
• /
• pp.2374-2382
• /
• 2002

Aluminum alloy/aramid fiber reinforced plastic(Al/AFRP) laminates consists of high strength metal(A15052) and laminated aramid fiber with structural adhesive bond. The mixture ratio effect of epoxy resin curing agent accelerator on the tensile strength and T-peel strength characteristic in Al AFRP laminates were investigated in this study. The epoxy. diglycidylether of bisphenol A(DCEBA), It'as cured by methylene dianiline(MDA) with or without an accelerator(K-54). Eight different kinds of resin mixture ratios were selected for the test , five kinds of Al/AFRP laminates were named as Al/AFRP(1) and three others of Al/AFRP laminates were named as Al/AFRP(2). The comparison of tensile strength and T-peel strength with variation of resin mixture ratio were studied. Respectively. Al/AFRP(1) and Al/AFRP(2) indicated approximately 6.0 times and 7.0 times more improved maximum tensile strength in comparison with those of monolithic A15052. Al/AFRP(2) indicated approximately 1.5 times more impoved maximum T-peel strengths in comparison with those of Al/AFRP(1). As results. Al/AFRP(2) turned out to have more effective characteristics on the tensile strength and T-peel strength than those of Al/AFRP(1).

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.166-171
• /
• 1999

Porous concrete contains about 20% voids after compaction so that it has high permeability which secures underground water resources. It is introduced in domestic since 1980' but has problems such as lack of optimized mixture, low strength and durability, efflorescence and other defects, etc. In this study, several mixture were designed based upon site works, and test specimens for compressive strength, tensile strength, flexual strength and permeability, were prepared in a laboratory. After 28days of curing, every performance was tested to find optimum mixture. The mixture was proposed as 380kg/㎥ of unit cement weight, 32% of W/C 10∼13mm of aggregate.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.3
• /
• pp.129-140
• /
• 2013

Bottom Ash is industrial by-product from a thermoelectric power plant. An immense quantities of bottom ash have increased each year, but most of them is reclaimed in ash landfill. In this study, in order to raise recycling rate of Bottom Ash, it is suggested to cure Bottom Ash (BA) mixtures mixed with cement, lime, Fly Ash (FA), and oyster shell (OS). Mixtures of 5~20 % mixing ratio had been cured for 1, 3, 7, 14, and 28 days using sealed curing and air-dry curing method. Unconfined compressive strength test was conducted to determine strength and deformation modulus ($E_{50}$) change for mixtures as mixing ratio and curing day, water contents of mixtures were measured after test. As a result, strength and $E_{50}$ were increased as mixing ratio and curing days, but values and tendencies of them appeared in different as kind of mixture, mixing ratio, curing method, and curing days. The results showed the addition of cement, lime, Fly Ash, and oyster soil in Bottom Ash could improved strength and $E_{50}$ and enlarge its field of being used.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1050-1053
• /
• 2003

Polymer dispersed liquid crystal mode can be classified into two cases, normally scattering mode (NS) and normally transparent (NT) mode according to an initial state. Electro-optic characteristic NS/NT PDLC mode can be improved by controlling the factors to influence the phase separation. In case of NS PDLC mode, we inspected change of a phase separation as a function of curing temperature for the mixture of E7 and NOA65 with different ratios. When the LC concentration is less than polymer such as LC : NOA65 = 40 : 60wt%, the PDLC cell is influenced strongly by the curing temperature. However, when LC concentration is much less than polymer such as LC : NOA65 : 80 : 20wt%, it is influenced slightly by the curing temperature. In case of NT PDLC mode, we observed change of a phase separation as a function of the ratio of the mixture and UV conditions such as curing temperature, UV intensity The cell made with strong UV intensity and curing temperature of $20^{\circ}C$, in case that the ratio of LC to polymer is 70:30wt%, showed good electro-optic characteristics.

• Fashion & Textile Research Journal
• /
• v.7 no.4
• /
• pp.445-451
• /
• 2005

Up to the present, fabric finishing methods have been mainly employed for the application of chitosan. However, the coated chitosan acid salt is prone to be detached from the fabric during the laundering process. In order to improve the wash fastness, chitosan treated fabrics are being subjected to thermal curing. In this study, chemical crosslinking reaction by epichlorohydrin was introduced to improve the problem of the thermal curing. An improvement of the wash fastness is expected since the coated chitosan component on the fabric become insoluble by the introduction of the crosslinking. The demerit of the single chitosan treatment (inferior handle due to the excessive stiffness, etc.) was supplemented by the application of chitosan-polyurethane mixture solution. The mixture ratios were adjusted to 1 : 0, 1 : 0.25, 1 : 0.5, 1 : 1, and 1 : 2 for the chitosan/PU mixture. Physical and mechanical properties of the finished fabric specimens were measured using the Kawabata Evaluation System(KES), and hand values were calculated accordingly based on the translational formulas.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.8
• /
• pp.149-154
• /
• 1999

FRMLs(Fiber Reinforced Metal Laminates) is a new type of hybrid materials. FRMLs consists of high strength metal and fiber which are laminated using a structural adhesive bond(epoxy resin). The effect of resin mixture ratios on the fatigue crack propagation behavior and mechanical property of Aramid fiber reinforced aluminum composites was investigated. The epoxy, diglycidylether of bisphenol A(DGEBA) was cured with methylene dianiline(MDA) with or without accelerator(K-54). Eight kinds of resin mixture ratio were tested for the experiment ; five kinds of FRMLs(1))epoxy & curing agent) and three kinds of FRMLs(2)(epoxy & curing agent & accelerator). FRMLs(2) have a more effective characteristics on the fatigue crack propagation behavior and mechanical property than FRMLs(1)

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.22 no.3
• /
• pp.46-59
• /
• 1980

This study was conducted to obtain the most effective distribution of grain size and the optimum lime content for lime-soil stabilization. To achieve the aim, the change of consistency, the characteristics of compaction and unconfined compressive strength were tested by adding of 0, 4, 6, 8, 10 and 12 percent lime by weight for all soils adjusted by given ratios of sand to clay. The results obtained were as follows; 1. There was a tendency that the plasticity index of lime-soil mixture was decreased by increasing the amount of lime, whereas the liquid limit was varied irregularly and the plastic limit was increased. 2. With the addition of more lime, the optimum moisture content of lime-soil mixture was increased, and the maximum dry density was decreased. 3. The optimum lime content of lime-soil mixture was varied from soil to soil, and the less amount of small grain size, the less value of optimum lime content. 4. The optimum distribution of grain size for lime-soil mixture was in the soil, having the ratio of about 60 percent of cohesive clay and about 40 percent of sand by weight. 5. In the soil having fine grain size, the effect of curing appeared for long periods of time, whereas the increasing rate of unconfined compressive strength was great on the soil of coarse grain size in the earlier stage of curing period.