• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.545-548
• /
• 2006

This study has been carried out to examine the properties of concrete according to replacement ratio and curing method of fly ash, in order to increase utilization of it. As the result of experiments, the 7 days of early age strength presented around 20MPa, up to 20% of replacement ratio, which is almost the same strength as non-replacement. However, when the replacement ratio was 30%, the strength was decreased to 16MPa, as 20% reduction compared to the non-replacement condition. In 365 days of long term aging, the strength was 5% higher, up to 20% of the replacement ratio, due to the pozzolanic reaction of fly ash. When the replacement ratio was 30%, it presented similar strength development as the non-replacement condition. Steam curing and autoclave curing increased the short age strength, regardless of the replacement ratio of fly ash; however, they don't have an effect on increasing the 365 days of long term strength. Water curing showed high strength development after 28 days, 51.81MPa, which is around 30% higher than air curing, 38.9MPa, steam curing, 38.6MPa, and autoclave curing, 39MPa. Therefore, water curing was examined as one of the very effective curing methods for developing long term strength of concrete.

• 농업과학연구
• /
• 제18권2호
• /
• pp.140-147
• /
• 1991

이 논문(論文)은 양생조건(養生條件)에 따른 알카리 실리카 반응(反應)이 인공경량골재 콘크리트의 공학적(工學的) 성질(性質)에 미치는 영향에 관한 것으로서, 이 연구(硏究)에 의하여 얻어진 결과(結果)를 요약(要約)하면 다음과 같다. 1 각 콘크리트의 팽창은 재령이 증가함에 따라 증가하였으며, 재령 90일에서 Type A, B, C 및 D 콘크리트의 팽창율은 각각 0.173%, 0.575%, 0.230% 및 0.680%로 되었다. 특히, Type D는 Type A 콘크리트 보다 3.93 배(倍)의 팽창율을 보였고, 팽창이 증가함에 따라 균열폭도 증가되었으며 팽창율 0.680%에서 균열의 최대폭은 0.5 mm를 나타냈다. 2. 각 콘크리트의 동탄성 계수는 재령이 증가할수록 증가하여, 재령 30일에서 최대치를 나타냈고, 그 이후부터는 점차 감소하였다. 또한, 재령 90일에서 Type A, B, C 및 D 콘크리트의 동탄성 계수 손실율은 각각 24.3%, 33.7%, 28.1% 및 37.0% 로 되었으며, Type D는 Type A 콘크리트 보다 1.52 배(倍)의 손실율을 보였다. 3. 각 콘크리트의 초음파 진동속도는 재령이 증가할수록 증가하여 재령 30일에서 최대치를 나타냈고, 그 이후부터는 점차 감소하였다. 또한, 재령 90일에서 Type A, B, C 및 D 콘크리트의 초음파 진동속도 손실율은 각각 6.4%, 8.7%, 8.5% 및 14.2% 증가하였으며, 손실율은 Type D가 Type A 콘크리트 보다 2.21 배(倍) 크게 나타났다. 4. 동탄성 계수와 초음파 진동속도와의 상관관계(相關關係)는 고도(高度)의 유의성이 인정되었으며, 동탄성 계수는 초음파 진동속도가 증가할수록 증가되었고, 감소할수록 감소하였다. 또한, 동탄성 계수의 감소율은 각 재령에서 초음파 진동속도 감소율 보다 2-7배 이상 크게 나타났다. 5 동탄성 계수와 초음파 진동속도는 팽창이 증가함에 따라 감소하였고, 그 감소율은 재령이 증가함에 따라 증가되었으며, 팽창의 증가율은 동탄성 계수와 초음파 진동속도의 감소율 보다 더 크게 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.19-22
• /
• 2003

This study is carried out (1) checking the development of compressive strength of high flowing concrete at early age, changing water-binder ratio, curing temperature, and type of aggregate, and (2) suggesting basic date that helping cost and schedule plan in future construction. As the result of this study, we find that high curing temperature is effective for the development of compressive strength of concrete at early age on the condition of each water-binder ratio, and after making the compressive prediction formula related to the curing temperature by maturity, the result of the formular is similar to the temperature-compressive strength-age measured data

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.751-756
• /
• 2003

This Paper concerns the compressive strength development tendencies of concrete according to their Ages and curing conditions. The test results are on follows; (1) The compressive strength development of concrete appears larger according to the curing conditions under water curing, condition structural curing and field curing conditions. (2) The compressive strength development rate of concrete after 28 days' curing becomes smaller, but the case of lower strength of concrete not.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2010년도 춘계 학술논문 발표대회 1부
• /
• pp.89-90
• /
• 2010

As a result of physical characteristics of using meta-kaolin and alkali accelerator, it was found that higher curing temperature density is favorable to strength development at early age and the higher the age is, the higher, most of the compressive strength gets. Also, I was shown that more than atmospheric curing, steam curing was favorable for development of compressive strength. When the temperature of curing temperature was higher, most of the compressive strengths were higher. Thus, based on this study, it was understood that environmental-friendly chemically combined concrete using meta-kaolin and alkali accelerator can be utilized without using cement.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2010년도 정기 학술발표대회
• /
• pp.42-42
• /
• 2010

In order to assure the quality of concrete structure in construction process, the odor strength measured by using odor sensor was used to evaluate curing effect. Then, the compressive strength and odor strength in ordinary concrete N were shown in water curing(=standard curing), indoor and outdoor atmospheric curing condition. The difference between odor strength in the standard curing and that in each curing condition was defined as the difference in the odor strength. And the difference in odor strength in slag powder concrete BP cured in water curing(=standard curing) for different period before exposing in outdoor atmosphere in winter season were evaluated at the age of 14 days. A necessity to prolong the moisture curing for the slag powder concrete BP compared with the ordinary concrete N to obtain a required curing effect was shown by measuring the odor strength and long term compressive strength.

• 한국전문물리치료학회지
• /
• 제4권2호
• /
• pp.51-58
• /
• 1997

The object of this study were twofold, namely, to study on (1) effect of using ultrasound therapy for curing warts (2) any relation between a cure for warts and onset of warts, as well as subject age. Our subjects, composed of 22 people from age 12 to 49, were assigned to two groups, experimental group and control group. We experimented for 8 session on 12 people in the experimental group by using ultrasound therapy to observe any morphological change in the warts or disappearance of a pain. However, we did not cure warts in the other group, control group. The result of the study are as follows. (1) Ultrasound therapy has an effect on curing warts. (2) Neither condition, onset of warts or subject age, had no influence on a cure for warts.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2002년도 학술발표회 발표논문집
• /
• pp.177-180
• /
• 2002

This study is performed to properties of ready mixed concrete (RMC) in site. The unit weight of the B company's RMC is range from $2,308kg/m^3\;to\;2,355kg/m^3$ and that of the J company's RMC is range from $2,288kg/m^3\;to\;2,310kg/m^3$. The compressive strength of B company's RMC of curing age of 7 days is range from $191kgf/cm^2-232kgf/cm^2$ and that of curing age of 28days is $273kgf/cm^2{\sim}306kg/cm^2$. The compressive strength of J company's RMC of curing age of 7 days is range from $151kgf/cm^2{\sim}177kgf/cm^2$ and that curing age of 28 days is range from $215kgf/cm^2{\sim}234kgf/cm^2$. The B and J company's air content is range of $3.2{\sim}5.2%$. The content of Chloride of the Band J company's is range from each $0.026kg/m^3{\sim}0.046kg/m^3\;and\; 0.034kg/m^3{\sim}0.069kg/m^3$, respectively.

• 한국건축시공학회지
• /
• 제12권1호
• /
• pp.87-97
• /
• 2012

This paper presents a method of estimating the setting time of cement mortar incorporating recycled aggregate powder (RP) and cement kiln dust (CKD) at various curing temperatures by applying an equivalent age method. To estimate setting time, the equivalent age using apparent activation energy (Ea) was applied. Increasing RP and CKD leads to a shortened initial and final set. Ea at the initial set and final set obtained by Arrhenius function showed differences in response to mixture type. These were estimated to be from 10~19 KJ/mol in all mixtures, which is smaller than those of conventional mixture ranging from 30~50 KJ/mol. Based on the application of Ea to Freisleben Hansen and Pederson's equivalent age function, equivalent age is nearly constant, regardless of curing temperature and RP contents. This implies that the concept of maturity is applicable in estimating the setting time of concrete containing RP and CKD. A high correlation was observed between estimated setting time and measured setting time. A multiregression model was provided to determine setting time reflecting RP and CKD. Thus, the setting time estimation method studied herein can be applicable to concrete incorporating RP and CKD in the construction field.

• 한국건축시공학회지
• /
• 제17권4호
• /
• pp.331-339
• /
• 2017

본 연구는 시멘트 종류, 폴리머 종류, 폴리머 시멘트비, 도장두께를 변화시켜 만든 PCS 도장철근의 시멘트 콘크리트에 대한 부착강도 시험을 실시하여 PCS 도장철근의 부착강도에 영향을 미치는 양생재령과 도장두께에 대하여 평가하고자 하였다. 또한 부착강도 시험결과로 얻어진 최적배합으로 만든 PCS 도장철근을 사용하여 철근콘크리트 보를 제작하여 휨 응력 시험을 실시하여 간접적으로 부착성을 평가하였다. 시험결과, PCS 도장철근의 부착강도는 양생재령 7일과 도장두께 $100{\mu}m$에서 최대치를 나타냈는데, 이는 보통 철근의 1.52배 및 에폭시 도장철근의 1.58배였다. 또한 PCS 도장철근을 사용한 철근콘크리트 보의 최대 파괴하중은 보통철근의 최대 파괴하중의 81.1%~102.3% 범위였으며, 에폭시 도장철근의 최대 파괴하중의 98.4%~124.1% 범위로 나타났다. 본 연구결과, 도장두께 $100{\mu}m$, 폴리머 종류 EVA, 폴리머 시멘트비 80%, 양생재령 7일 조건으로 만든 PCS 도장철근은 실제 건설현장의 철근콘크리트 구조물의 도장철근으로 활용할 수 있는 가능성을 확인하였다.