• 보존과학회지
• /
• 제28권2호
• /
• pp.131-139
• /
• 2012

석조문화재의 보존 복원 과정에 적용되는 에폭시 수지에 경화제의 혼합을 통하여 경화 시 발열 반응을 제어할 수 있는 접착 시스템을 연구하였다. 사용된 에폭시 주제는 hydrogenated bisphenol A (HBA), 경화제로는 속경화형 경화제 FH와 poly(propyleneglycol)bis(2-aminopropylether) (SH)를 사용하였으며, 무기 첨가물은 탈크를 사용하였다. 에폭시 수지와 경화제의 혼합비에 따라 경화 시 온도를 측정하고, differental scanning calorimeter (DSC)를 이용하여 경화동력학을 확인하였으며, 기계적 특성을 파악하기 위해 무기 첨가물의 함량에 따른 인장강도, 전단강도를 측정하였다. 연구 결과, 에폭시 수지의 경화제 혼합을 통하여 경화 시 반응열 상승폭 제어 및 경화 거동 제어의 가능성을 확인하였으며, 무기 첨가물 첨가를 통해 적절한 강도 조절이 가능하여 석조문화재에 적용 가능한 새로운 접착 시스템을 개발하였다.

• Elastomers and Composites
• /
• 제51권2호
• /
• pp.81-92
• /
• 2016

1,3-Diphenylguanidine (DPG) is commonly used as a secondary accelerator which not only acts as booster of cure but also activating silanization reaction. The aim of this study is to increase the interaction between silica and rubber by using DPG. In this study, mixing was proceeded in two steps. The T-1 compound is mixed DPG with silica and silane coupling agent in the kneader at high temperature which is named as $1^{st}$ mixing step. T-3 compound is mixed DPG with curatives in the two-roll mill at low temperature which is named as $2^{nd}$ mixing step. The T-2 compound is mixed a half of DPG in $1^{st}$ mixing step and the remainder is mixed in $2^{nd}$ mixing step. Total DPG content was equal for all compounds. When DPG is mixed with silica, silane coupling agent during the $1^{st}$ mixing step, a decrease in cure rate and an increase in scorch time can be seen. This indicates that DPG is adsorbed on the surface of silica. during rubber processing. However, bound rubber content is increased and dynamic properties are improved. These results are due to the highly accelerated silanization reaction. However, there are no significant difference in 100%, 300% modulus.

• Elastomers and Composites
• /
• 제38권3호
• /
• pp.213-226
• /
• 2003

Imidazole 촉매의 종류에 따른 bisphenol-F계 에폭시 (Diglycidyl ether of bisphenol-F)/nadic methyl anhydride 수지 시스템의 경화 및 유변학적 거동이 시차주사열량계 (differential scanning calorimeter)와 회전 점도계를 사용하여 연구되었다. 경화반응기구를 분석하기 위해서 몇 개의 등온경화온도에서 등온시험이 수행되었다. Bisphenol-F계 에폭시/anhydride 조성물의 경화곡선은 전환량이 $20{\sim}40 %$일 때 최대 값을 보이는 자체촉매반응을 나타내었다. 속도상수($k_1,\;k_2$)는 온도 의존성을 가지나 반응차수 (m+n)는 온도 의존성이 없었으며, 반응차수는 거의 3으로 계산되었다. 촉매의 종류에 따라 두 개의 반응기구를 가지고 있었다. G'-G" crossover 방법을 통해 겔화 시간을 측정하였으며, 이 결과로부터 활성화에너지를 구하였다. 용융 실리카를 첨가한 조성물의 유변학적 거동으로부터 온도와 충전제 함량에 따른 겔화 시간의 대수 변화가 직선적인 관계를 나타낸다는 것을 알 수 있었다. 고충전된 에폭시 수지 조성물은 전형적인 준소성 거동을 보였으며, 최대충전밀도가 클수록 점도는 낮아졌다.

• 대한화학회지
• /
• 제47권5호
• /
• pp.472-478
• /
• 2003

본 연구에서는 표면처리된 제올라이트에 따른 제올라이트/DGEBA의 경화 동력학과 기계적 계면특성을 고찰하였다. 경화제는 4, 4''-diamino diphenyl methane(DDM)을 사용하였으며, 제올라이트는(PZ) 15와 35 wt% KOH (15-BZ 그리고 35-BZ)로 표면처리하여 XPS와 XRD로 분석하였다. 경화 동력학은 DSC로 분석하였으며, 시편의 기계적 계면특성은 임계응력 세기인자(critical stress intensity factor, $K_{IC}$)와 임계변형에너지 방출속도(critical strain energy release rate, GIC)를 통하여 알아보았다. XPS와 XRD의 결과로부터, KOH로 표면처리된 제올라이트는 나트륨 (Na)이 칼륨(K)으로 이온교환되었으며, 표면처리로 인한 Al-O의 결합세기의 약화로 $Si_{2p}/Al{2p}$의 값이 증가하였다. 동적 DSC와 기계적 계면특성 결과로부터, 제올라이트/DGEBA 중에서 15-BZ의 경화 활성화에너지($E_a$)는 감소하였으며, $K_{IC}$와 $G_{IC}$는 증가하였다. 이러한 결과들은 제올라이트의 표면처리에 의해 산성도가 증가하였으며, 이렇게 증가된 산성도가 제올라이트와 에폭시 사이의 경화반응에 영향을 준 것으로 관찰된다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1994년도 추계 학술발표 강연 및 논문 개요집
• /
• pp.125-126
• /
• 1994

The chemorheological changes and kinetics during curing reaction of an silica filled epoxy system (DGEBA with curing agent Polyxoypropylenediamine) were investigated. This study concentrates on the influence of silica on the reaction kinetics and rheological behavior of the eopxy system. The concentration of the filler was varied 0~200phr. Curing behavior of the silica filled epoxy system was measured at various heating rates with DSC. Conversion was also measured by integrating the obtained DSC curve and Kinetic parameters measured by using the nonlinear regression method. DSC experiments showed that the presence of silica was found to accelerate the progress of the curing reaction and of reduce the heat of reaction compared with that of unfilled epoxy systems . Rheological experiments were conducted on a Physica by using a disposable parallel plate fixture. Material properites were measured such as the elastic modulus(G′), the loss modulus(G"), the loss tangent(tan $\delta$), and the viscosity was at the initial stahe, and the more the silica filler was added, and the lower the gel temperature was in the epoxy system. In this study it is concluded that the curing of the silica filled epoxy system was found to be accelerated, as silica was added to the epoxy compound.

• 한국광물학회지
• /
• 제12권1호
• /
• pp.43-53
• /
• 1999

The medical mineral menas a single mineral or a complex of minerals. It is natural material. using the medical action of he major or the minor elements, and traditional medicine stuff which has been used since long time ago. Jusa, cinnabar as the mineral name, is the product of the hydrothermal process. It is used to relax the body and cure high blood pressure, apoplexy and cardiopathy. Jusais the major component of "An shin hwan" and "Woo hwang chung shim hwan" nowadays because it has such an excellent calm effect. In addition, it is used to cure cancers such as esophageal cancer and gastric cancer. Jusa composed of mercuric sulfide causes mercury poisoning such as Minamata disease. It is dealt with mineralogical property and chemical composition medical stuff in Korea and China, as well asmercury poisoning and medical action of Jusa in this study. In order to predct accumulation of the interior of the body of the major and minor elements in Jusa, leaching experiment of Jusa by artificial gastric juice was done as well as thermodynamic reaction modelling to know concentration of each species of body fluid. The minor elements of 24 species such as As, Pb, Cd, a and Fe by leaching reaction of Jusa and artificial gastric juice were leached. We can know the fact that as is less than 1 ppm, Hg is less than 25 ppm and Cd and m are not detected. In addition, mercury exists as species of Hg2+, HgCl+, HgCl2, HgCl3-, HgCl42-, HgClOH, HgS(H2S)2, Hg(HS)3-, HgS22-, HgOH and Hg(OH)2 by reaction modelling between Jusa and artificial gastric juice. The concentration of sulfide complexes is 24.2 ppm and that of others is less than 10 ppm. According to increasing pH, the concentration of HgS(H2S)2, Hg(HS)3+, HgS22- and Hg(OH)2 increases, whereas the concentration of HgCl+, HgCl2, HgCl3- and HgCl42- decreases. Therefore, Jusa is very useful for the development of new medicine because it is possible to predict formation of the body species and species accumulation on mercury known as a toxic element and concentration changes of toxicity and efficiency.city and efficiency.

• 공업화학
• /
• 제8권6호
• /
• pp.960-966
• /
• 1997

양이온 촉매(N-Benzylpyrazinium hexafluoroantimonate, BPH)/에폭시 경화계에서 에폭시 수지(DGEBA/DGEBF)의 에폭시 당량 및 촉매함량이 경화 거동, 열적특성 및 유변학적 특성에 미치는 영향을 FT-IR, DSC 및 Dynamic Viscometer를 이용하여 연구하였다. 0.5wt% BPH를 함유하는 DGEBA의 경우 DGEBF/BPH에 비하여 반응 속도가 빠르고 반응 초기에서의 반응 진행(전환율)이 크게 나타나는 것을 등온 DSC 및 FT-IR 결과에서 확인할 수 있었다. 반면 BPH의 함량이 증가함에 따라 반응속도와 전환율이 거의 같은 값을 보여줌을 알 수 있었다. 겔화점(Gel point)으로 정의되는 저장 탄성율(G')과 손실 탄성율(G")의 교차점(G'/G"=1)의 경우 하이드록시기를 포함할 때 도달시간이 빠르게 나타나는데 이는 반응 초기에 하이드록시기의 반응 참여에 의해 반응 초기에 3차원 가교 구조를 형성하는 것으로 생각되었고 또한 DSC 및 FT-IR 결과와 일치하는 결과를 보여주었다. 겔화점에 도달하는 시간을 이용하여 구한 활성화에너지 값은 $31-39kJ.mol^{-1}$의 값을 나타내었다.

• 한방안이비인후피부과학회지
• /
• 제15권1호
• /
• pp.50-62
• /
• 2002

In the age of puberty or 20-30th young people who are sensitive to outward appearance, acne is serious problem at beauty and has social and psychological influence on that people. So this experiment is carried out for test whether the addition temperament drugs of Yungyopaedock-san(YP) have an anti-inflammatory effect and have suppression effect on immunocyte in the state of inflammation which induced by acne. The results was as follows. 1. YP has suppress inflammatory reaction induced by carageenan. 2. YP has suppress increasing activation of abdominal cavity macrophage in the carageen and zymosan induced inflammation. 3. YP has suppress increasing activation of spleen cell in the carageenan and zymosan induced inflammation. Based on the above result, YP was improved its suppression effect to the inflammatory reaction through the suppression of spleen cell and macrophage activation. So we concluded that YP is prospected as a anti-inflammatory agent to cure inflammation induced by ance.

• Elastomers and Composites
• /
• 제53권2호
• /
• pp.52-56
• /
• 2018

The present study examines the transformation of dynamic DSC data into the equivalent isothermal data for the formation kinetics of a polyurethane elastomer. The reaction of 2'-dichloro-4,4'-methylenedianiline (MOCA) with a PTMG/TDI-based isocyanate prepolymer was evaluated. DSC measurement was performed in the dynamic scanning mode with several different heating rates to obtain the reaction thermograms. Then, the data was transformed into the isothermal data through a procedure based on Ozawa analysis. The main feature of this procedure was the transformation of $({\alpha}-T)_{\beta}$ curves from dynamic DSC into $({\alpha}-t)_T$ curves using the isoconversional $(t-T)_{\alpha}$ diagram. Validity was discussed for the relationship between the dynamic DSC data and the transformed isothermal results.

• Restorative Dentistry and Endodontics
• /
• 제29권4호
• /
• pp.386-398
• /
• 2004

Objectives: The purpose of this study was to observe the reaction kinetics and the degree of polymerization of composite resins when cured by different light sources and to evaluate the effectiveness of the blue Light Emitting Diode Light Curing Units (LED LCUs) compared with conventional halogen LCUs. Materials and Methods: First, thermal analysis was performed by a differential scanning calorimeter (DSC). The LED LCU (Elipar Freelight, $320{\;}mW/\textrm{cm}^2$) and the conventional halogen LCU (XL3000, $400{\;}mV/\textrm{cm}^2$) were used in this study for curing three composite resins (SureFil, Z-250 and AEliteFLO). Second. the degree of conversion was obtained in the composite resins cured according to the above curing mode with a FTIR. Third, the measurements of depth of cure were carried out in accordance with ISO 4049 standards. Statistical analysis was performed by two-way ANOVA test at 95% levels of confidence and Duncan's procedure for multiple comparisons. Results: The heat of cure was not statistically different among the LCUs (p > 0.05). The composites cured by the LED (Exp) LCUs were statistically more slowly polymerized than by the halogen LCU and the LED (Std) LCU (p < 0.05). The composite resin groups cured by the LED (Exp) LCUs had significantly greater degree of conversion value than by the halogen LCU and the LED (Std) LCU (p =0.0002). The composite resin groups cured by the LED (Std) LCUs showed significantly greater depth of cure value than by the halogen LCU and the LED (Exp) LCU (p < 0.05).