• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.521-522
• /
• 2008

An etch-less simple method was developed to fabricate two-dimensional nanostructures on glass substrate directly by using UV curable polymer resin and UV nanoimprint lithography in order to improve output coupling efficiency of OLEDs. OLEDs integrated on nanoimprinted substrates enhanced electro-luminance intensity by up to 50% compared with the conventional device.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.344-347
• /
• 2008

We fabricated the outer type-dynamic microlens array using a surface-stabilized ferroelectric liquid crystal, UV curable polymer and the stacked liquid crystalline polymer. The outer type-microlens array has a lower driving voltage and fast switching property. It is applicable to a variety of optical systems.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1779-1783
• /
• 2006

The hybrid thin-film (HTF) passivation layer composed of the UV curable acrylate layer and MS-31 (MgO:SiO2=3:1wt%) layer was adopted in organic light emitting diode (OLED) to protect organic light emitting materials from penetrations of oxygen and water vapors. The moisture resistance of the deposited HTF layer was measured by the water vapor transmission rate (WVTR). The results showed that the HTF layer possessed a very low WVTR value of lower than $0.007g/m^2$ per day at $37.8^{\circ}C$ and 100% RH. Therefore, the HTF on the OLED was found to be very effective in protect what from the penetrations of oxygen and moisture.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.1034-1037
• /
• 2003

In this work, Integral photography with variable focusing lens arrays is proposed. We fabricate two-dimensional liquid crystal lens arrays using cohesion of UV curable polymer and lithography. Applied voltage to the cell alters the effective refractive index of the liquid crystal layer and results in a change of the focal length. By adjusting the focal length, synchronized elemental image array for real or virtual mode is integrated in front of or behind the lens array.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.11
• /
• pp.70-75
• /
• 1997

a wavelength division multiplexer based on a polymeric arrayed-waveguide grating has been designed and fabricated. A 4-channel multiplexer with a spacing of 3.2 nm is designe dby using te 2-dimensional beam propagation method. A UV-curable epoxy, NOA73, is used for the core layer, and a passive polymer, PMMA, for the cladding layer. The polymer waveguides are fabricated by the reactive ion etching method and their optical properties are characterized. The fabricted device has a center wavelength of 1548.3 nm, and the wavelength spacing between the channels is 3.2nm. The measured crosstalk is better than -18dB.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.9
• /
• pp.781-786
• /
• 2015

Recently, studies of 3D printing methods have been working in various applications. For example, the powder base method laminates the prints by using a binding or laser sintering method. However, the draw back of this method is that the post process is time consuming and does not allow for parts to be rapidly manufactured. The binding method requires the post process while the time required for the post process is longer than the manufacturing time. This paper proposes a UV curing binding method with an integrated piezo printing head system. The optimization of an arbitrary waveform generation for the control of a UV curable resin droplet was researched, in addition to developed optimized UV curing processes in multi nozzle ink jet heads.

• Corrosion Science and Technology
• /
• v.4 no.5
• /
• pp.207-210
• /
• 2005

Coating performance of various coating systems including chlorinated rubber and epoxy/urethane used most for steel structures of highway in Korea, was evaluated by exposing test specimen to complex deterioration factors such as ultraviolet ray, moisture, freeze-thaw cycle and salt. Deteriorated specimens were evaluated by chalking and rust grades according to ASTM, and measurement of color differences and adhesion. In overall coating performances such as corrosion resistance, photochemical stability, and adhesion, ceramic/ urethane, moisture-curable urethane/ urethane, etc. were superior. As for other coating materials tested in this study, superior materials against certain deterioration factors may be inferior against other factors. Accordingly, in order to select suitable maintenance coating materials for the use, it is thought that investigation of suitability through experiment should precede selection of materials, especially for unusual coatings or paints.

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.02a
• /
• pp.199-200
• /
• 2007

UV 처리 광학 접착제를 가지고 단일 포토리소그라피 공정을 사용하여 마이크로 렌즈를 제작하였다. 먼저 유리판 위에 자외선 처리 광학 접착제를 코팅 한 후 UV 노광하고 아세톤에서 현상 후 핫플레이트에서 유리전이 온도 이상에서 열적 재흐름이 일어나도록 하여 마이크로 렌즈를 만드는데 성공하였다 이를 실제 LED 소자 위에서 마이크로 렌즈를 만들어 보고 LED의 외부 추출 효율이 높아지는지를 실험하였다. 또한 기존의 UV 처리 광학 접착제에 나노 입자을 첨가하여 굴절률을 더 높여 마이크로 렌즈를 만드는 실험을 하였다.

• Journal of Chest Surgery
• /
• v.25 no.11
• /
• pp.1269-1272
• /
• 1992

Benign cardiac tumors are almost uniformly curable, but malignant cardiac tumors are almost always fatal despite of modern techniques of diagnosis and surgical treatment Resection of malignant tumors of heart is occasionally feasible and can result in prolonged survival, although cure is unlikely. Survival may be enhanced by postoperative irradiation in selected patients, but chemotherapy does not appear to be beneficial. Fibromyxosarocoma of the left atrium is a primary malignant tumor of the heart which is extremely rare and has a poor prognosis and rapid recurrence. It is important to differentiate the uniformly fatal fibromyxosarcoma from the more common benign atrial myxoma. A 19-year-old woman with a fibromyxosarcoma of the left atrium which was extirpated surgically, and postoperative irradiation was given[totally 4,500 rads]. She is still alive 9 months postoperatively without recurrence.

• The Journal of the Korean dental association
• /
• v.10 no.2
• /
• pp.87-90
• /
• 1972

The carcinoma of the maxillary sinus occupies about 0.25% of all human cancers. The radiations therapy for maxillary sinus hs not been practiced widely in this country. The authors treated a case of relatively advanced maxillary sinus cancer with combined radium and external irradiation with a succesful result. The clinical course and treatment are introduced and evaluated in detail. The authors believe that the carcinoma of the maxillary sinus is a curable disease even though it is relatively advanced one.