• Journal of the Korean institute of surface engineering
• /
• v.32 no.3
• /
• pp.351-355
• /
• 1999

BN films with a high content of cubic phase has been deposited by a variety of techniques. It is well known that c-BN films grow with a unique microstructure consisting of $sp^2$ and $sp^{3-}$ bonded layers. Because of existence of the initially grown $sp^{2-}$ /bonded layer, BN films are not adhesive to the substrates. In this study, post-N$^{+ }$ / implantation was applied to improve the adhesion of the films. A Monte Carlo program TAMIX was used to simulate this modification process. The simulation showed nitrogen concentration profile at $1200\AA$ in depth in case of 50keV -implantation energy. FTIR spectra of the $N^{+}$ implanted specimens demonstrated a strong change of absorption band at 1380 cm$^{ -1 }$The films were also investigated by HRTEM. From these results, it is concluded that the post ion implantation could be an effective technique which improves the adhesion between BN film and substrate.

• Journal of the Korean institute of surface engineering
• /
• v.41 no.2
• /
• pp.43-47
• /
• 2008

Cubic boron nitride(c-BN) films were deposited on tungsten carbide insert tool by microwave plasma enhanced chemical vapor deposition(MPECVD) from a gas mixture of triethyl borate$(B(C_2H_5O)_3)$, ammonia $(NH_3)$, hydrogen$(H_2)$ and argon(Ar). The qualities of deposited thin film were investigated by x-ray diffrac-tion(XRD), field emission scanning electron microscopy(FE-SEM) and micro Raman spectroscope. The surface morphologies of the synthesised BN as well as crystallinity appear to be highly dependent on the flow rate of $B(C_2H_5O)_3$ and $(NH_3)$ gases. The deposited film had more crystallized phases with 5 scem of $B(C_2H_5O)_3$ and $(NH_3)$ gases than with 2 sccm, and the phase was identified as c-BN by micro Raman spectroscope and XRD. The adhesion strength were also increased with increasing flow rates of $B(C_2H_5O)_3$ and $(NH_3)$ gases.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.43-43
• /
• 2011

BN(Boron Nitride)은 온도와 압력 조건에 따라 안정한 상이 sp3 결합인 cubic 구조의 BN(cBN)과 sp2 결합인 hexagonal 구조의 BN(hBN or tBN)으로 나뉘는데, 이 중 cBN은 우수한 기계적, 물리적, 화학적 특성으로 인해 박막 분야에서 매우 높은 응용가능성을 지니고 있다. 하지만 cBN 박막의 합성과정에서의 필수적인 요소인 높은 압축잔류응력은 cBN을 응용분야에 적용하는데 있어 한계점으로 계속 남아 있었다. 그동안 이러한 잔류응력을 감소시키기 위해 열처리, 이온 주입, 제 3의 물질 첨가 등 다양한 관점에서 접근한 연구들이 진행되어 왔다. 본 연구에서는 cBN 합성과정에서 잔류응력을 감소시키기 위한 방법으로 수소를 첨가하였고, 그에 따른 잔류응력의 변화를 분석하고, 그 과정에서 잔류응력의 형성에 수소가 어떤 역할을 하는지 규명하고자 하였다. cBN 박막은 hBN을 target으로한 unbalanced magnetron sputtering를 사용하여, 실리콘 wafer 위에 합성하였다. 증착압력은 1.3mTorr로, 수소의 첨가량을 증가시키며 잔류응력과 cBN fraction을 관찰하였다. cBN fraction은 FTIR로 분석하였고, 잔류응력은 실리콘 strip의 in-situ 곡률측정법으로 계산하였다. cBN 박막의 조성과 구조 분석, 수소의 역할 규명을 위해 RBS 및 HRTEM을 이용하였다.

• Korean Journal of Materials Research
• /
• v.20 no.4
• /
• pp.194-198
• /
• 2010

Cubic boron nitride (c-BN) is a promising material for use in many potential applications because of its outstanding physical properties such as high thermal stability, high abrasive wear resistance, and super hardness. Even though 316L austenitic stainless steel (STS) has poor wear resistance causing it to be toxic in the body due to wear and material chips, 316L STS has been used for implant biomaterials in orthopedics due to its good corrosion resistance and mechanical properties. Therefore, in the present study, c-BN films with a $B_4C$ layer were applied to a 316L STS specimen in order to improve its wear resistance. The deposition of the c-BN films was performed using an r.f. (13.56 MHz) magnetron sputtering system with a $B_4C$ target. The coating layers were characterized using XPS and SEM, and the mechanical properties were investigated using a nanoindenter. The friction coefficient of the c-BN coated 316L STS steel was obtained using a pin-on-disk according to the ASTM G163-99. The thickness of the obtained c-BN and $B_4C$ were about 220 nm and 630 nm, respectively. The high resolution XPS spectra analysis of B1s and N1s revealed that the c-BN film was mainly composed of $sp^3$ BN bonds. The hardness and elastic modulus of the c-BN measured by the nanoindenter were 46.8 GPa and 345.7 GPa, respectively. The friction coefficient of the c-BN coated 316L STS was decreased from 3.5 to 1.6. The wear property of the c-BN coated 316L STS was enhanced by a factor of two.