• 한국자동차공학회논문집
• /
• 제10권2호
• /
• pp.212-219
• /
• 2002

In the frontal collision of cars, front parts of cars such as engine rail and side members that are composed of hatted section tubes should absorb most of the collision energy far the passenger compartment not to be deformed. For these reasons the study on the collapse characteristics, maximum crushing load and energy absorption capacity of hatted section tubes are needed. In this study, top hatted section tubes and double hatted section tubes are investigated. The maximum crushing load of hatted section tubes is induced from plastic buckling stress of plates by considering that the hatted section tubes are composed of plates with each different boundary conditions and that its material has a strain hardening effect. On this concept maximum crushing load equations of hatted section tubes are derived and verified by experiments. from the results of experiment, the differences of collapse characteristics between top hatted section tube and double hatted section tube are analysed. And mean crushing loads of hatted section tubes from experiments are compared with other theory.

• 한국지반공학회논문집
• /
• 제32권12호
• /
• pp.23-32
• /
• 2016

본 연구에서는 각종 구조물 철거 시 발생하는 폐콘크리트를 파쇄 처리하여 발생한 순환골재를 각종 토공 및 보조기 층용에 재활용 시 발생할 수 있는 하중-변위 및 파쇄 특성을 분석하기 위해 단입자 파쇄실험을 실시하였다. 수화물과 골재로 구성된 75mm 이하의 순환골재를 40mm 크기(75-40mm 사이)와 20mm 크기(40-20mm 사이)의 골재로 나누어 실험하였다. 순환골재에 하중이 증가할 경우 단입자의 파쇄 거동은 불규칙한 표면이 가압판에 밀착되면서 초기에 표면이 파쇄되는 '표면파쇄(Surface crushing)', 표면파쇄 이후 골재와 수화물이 분리되는 소규모 부분적 파쇄와 균열이 반복적으로 발생하는 '수화물파쇄(Hydrate crushing)', 수화물파쇄가 단계적으로 반복되다가 최대하중에서 골재가 파쇄되면서 하중이 급격히 감소되는 취성파괴인 '골재파쇄(Aggregate crushing)'의 순서로 파쇄 사이클(crushing cycle)이 진행되었다. 한편, 하중이 지속적으로 증가함에 따라 이러한 파쇄 사이클은 수 차례 반복되는 경향을 보였다. 순환골재의 형상은 둥글거나 사각형에 가깝거나, 삼각형 또는 길쭉한 형태로 표면상태나 형상에 따라 파쇄 형상이 다르게 나타났다. 골재파쇄(최대 파쇄)에서 취성파괴로 하중이 감소되는 비율인 파쇄하중 감소율은 50% 이상인 경우는 63% 정도이며, 90% 이상인 경우도 15% 정도로 나타났다. 40mm 단입자는 최대하중 3.05~4.38kN 정도에서 대부분 파쇄되어 작은 입자로 분리되며, 세립화된 단입자 개수를 기준으로 20mm 이하의 분포비율은 약 70% 정도였다.

• 대한기계학회논문집A
• /
• 제21권1호
• /
• pp.12-21
• /
• 1997

A model for analysis of the crushing mechanism of thin-walled rectangular tube is presented. The crushing modes of rectangular tubes may be characterized as either compact or noncompact and the model presented only considers compact modes. The unloading process in the crushing are categorized into three different stages where the distinction is based on the ratio of outward to inward fold length. Using the kinematic relations and the energy conservation principle, the instantaneous crush load is derived. An approximate equation that considers the rolling behavior is also given so that the crush load history may be established. The equation is experimentally proved.

• Tribology and Lubricants
• /
• 제19권5호
• /
• pp.259-267
• /
• 2003

A brake device for the high-speed impacting object is designed using an axial crushing of thin-walled metal cylinder. Thickness of the cylinder is increased smoothly from the impacting end to the fixed end, resulting in the truncated cone shape. Truncated cone shape minimizes the imperfection-sensitivity of the structure and ensures that plastic hinges are formed sequentially from impacting end. This prevents the undesirable sudden rise in the first peak-crushing load. Several specimens with different conic angles, mean thickness of the wall, and materials were designed and quasi-static compression tests were performed on them. Results indicate that adoption of appropriate conic angle prevents simultaneous wrinkles generation and sudden rise of crushing load and that appropriate conic angle differs in each case, depending on the geometry and material property of the cylinder. Finite element analysis was performed for static compression of the cylinder and its accuracy was checked for the future application.

• 대한안전경영과학회지
• /
• 제7권1호
• /
• pp.159-166
• /
• 2005

It is not difficult to see the road repairing. There are many and various machines which crush road surface. The efficiency and power of the machine depend on crushing head-shape, crushing interval, crushing load, crushing stress, machine's dropping height and roller's kind. The objective of this study is to select the optimal model among ten models of crushing machine with constraints such as crushing depth, variation, and crushed particle size. And then this paper provides the valid theoretical base on selected model. The data for this study are chosen from the site of construction in Kangnung during three months (2004. 6. 1${\~}$2004. 8. 31). The provided methodology in this paper will be fruitful not only for the selection of crushing machine but also for the aspects of construction period, cost, work efficacy according to the condition from the various sites of construction.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 추계학술대회
• /
• pp.125-130
• /
• 2004

It is not difficult to see the road repairing. There are many and various machines that can crush road surface. The efficiency and power of the machine depend on crushing head-shape, crushing interval, crushing load, crushing stress, machine's dropping height and roller's kind. The objective of this study is to select the optimal model among ten models of crushing machine with constraints such as crushing depth, variation, and crushed particle size. The data for this study are chosen from the site of construction in Kangnung during three months ($2004.\;6.\;1\;\sim\;2004.\;8.\;31$). The provided methodology in this paper will be fruitful not only for the selection of crushing machine but also for the aspects of construction period, cost, work efficacy according to the condition from the various sites of construction.

• 콘크리트학회지
• /
• 제9권1호
• /
• pp.183-194
• /
• 1997

통상적인 방법에 의해 측정된 콘크리트 보의 변위는 지지점의 국부변위나 변위의 측정 위치에 따른 외부적인 요인이 포함된다. 이러한 오류에 의한 변위의 크기는 실제 변위크기와 거의 같은 정도이기 때문에 이를 사용하여 정확한 파괴 파라메타를 구하기 어렵다. 본 연구에서는 외부적인 요인의 영향을 받지 않는 균열개구 변위와 하중작용 방향 변위의 상관관계를 규명하고, 하중 개구부 변위를 파괴특성을 구하는 인자로 사용하였다. 균열개구 변위와 하중방향 변위는 서로비례함을 알 수 있었으며, 이 비례관계를 이용하여 RILEM에서 제시한 파괴에너지 결정방법에 대한 문제점을 발견하였고 이에 대한 수정방법을 제시하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2059-2065
• /
• 2008

In this paper, quasi-static crushing tests of composite circular tubes under axial compression load are conducted to investigate the energy absorption characteristics. Circular tubes used for this experiment are glass/epoxy (GFRP) composite tubes, which is fabricated by the filament winding method. One edge of the composite tube is chamfered to reduce the initial peak load and to prevent catastrophic failure during crushing process. Two suggested trigger mechanisms for the composite tubes are investigated. Crushing modes are mainly affected by thickness/diameter ratio, and average crushing loads are mainly affected by their cross-sections. Energy absorption characteristics vary significantly as a function of the tube geometry, trigger mechanism, t/D ratio and the cross-sectional shape.

• Steel and Composite Structures
• /
• 제21권3호
• /
• pp.605-628
• /
• 2016

The energy absorption characteristics of diamond core sandwich cylindrical columns under axial crushing process depend greatly on the amount of material which participates in the plastic deformation. Both the single-objective and multi-objective optimizations are performed for columns under axial crushing load with core thickness and helix pitch of the honeycomb core as design variables. Models are optimized by multi-objective particle swarm optimization (MOPSO) algorithm to achieve maximum specific energy absorption (SEA) capacity and minimum peak crushing force (PCF). Results show that optimization improves the energy absorption characteristics with constrained and unconstrained peak crashing load. Also, it is concluded that the aluminum tube has a better energy absorption capability rather than steel tube at a certain peak crushing force. The results justify that the interaction effects between the honeycomb and column walls greatly improve the energy absorption efficiency. A ranking technique for order preference (TOPSIS) is then used to sort the non-dominated solutions by the preference of decision makers. That is, a multi-criteria decision which consists of MOPSO and TOPSIS is presented to find out a compromise solution for decision makers. Furthermore, local and global sensitivity analyses are performed to assess the effect of design variable values on the SEA and PCF functions in design domain. Based on the sensitivity analysis results, it is concluded that for both models, the helix pitch of the honeycomb core has greater effect on the sensitivity of SEA, while, the core thickness has greater effect on the sensitivity of PCF.

• 대한조선학회지
• /
• 제27권1호
• /
• pp.17-23
• /
• 1990

세장비가 작은 구조부재는 충돌과 같은 상황하에서 압축을 받는 경우, 축방향으로 접혀지는 소성 변형에 의해서 충돌에너지의 대부분을 흡수한다. 이 경우, 관성을 무시한다 하더라도 연강 부재의 정적인 하중에 대한 압괴강도에 비해서 변형률에 의한 영향으로 인해 동적 압괴 강도가 높아진다는 것은 잘 알려진 사실이다. 본 논문에서는 부재의 정적 하중에 대한 압괴강도 추정법을 소성변형의 운동학적 방법을 이용하여 수행하였다. 종래의 항복하중에 변형률을 고려한 동적 압괴 하중 추정치가 동적 영향을 과대평가하게 되므로 평균 소성변형 응력의 변형률에 대한 영향을 고려하여 튜브부재의 동적 압괴 강도 추정을 유도하였고, 이를 발표된 실험결과와 비교 검토하였다. 본 연구에서 얻은 만족스러운 결과를 토대로 하여 앞으로 이 방법을 선박의 충돌시 선수구조의 충돌에너지 흡수의 추정에 적용시킬 것이다.