• Mineral and Industry
• /
• v.26
• /
• pp.13-21
• /
• 2013

This study is carried out experiments on various factors for improving the grade of low grade scheelite by Knelson concentrator prior to the main beneficiation process. Even though there are several gravity separators such as Jig, Spirals and etc. for rougher concentrate, the KC3 Knelson Concentrator was adopted to get better separation efficiency and beneficiating effects for pre-concentration of the low grade scheelite ore. The feed samples was prepared to minus 1mm in size by crushing and grinding. The important factors in the KC3 Knelson Concentrator test were examined in terms of the variations such as number of treatment, feed rate, rotation speed of bowl(G force), water flow rate, pre-removal of magnetic minerals, feed size and feed grade. According to the result of experiment, it shows that the important technical variations are limited in terms of number of treatment, feed rate, feed size and feed grade. The final result shows that the KC3 Knelson Concentrator obtains the scheelite pre-concentrate of about $3%WO_3$ grade and 90% recovery, respectively, from the feed containing about $0.8-1.0%WO_3$ grade.

• Journal of the Korea Concrete Institute
• /
• v.24 no.1
• /
• pp.25-35
• /
• 2012

For a member subjected to direct shear forces, forces are transferred across interface concrete area and resisted by shear transfer capacity. Shear-friction equations in recent concrete structural design provisions are derived from experimental test results where shear-friction capacity is defined as a function of steel reinforcement area contained in the interface. This empirical equation gave too conservative values for concrete members with large amounts of reinforcement. This paper presents a method to evaluate shear transfer strengths and to define ultimate conditions which result in crushing of concrete struts after yielding of longitudinal reinforcement perpendicular to the interface concrete. This method is based on the bi-axial stress field theory where different constitutive laws are applied in various means to gain accurate shear strengths by considering softening effects of concrete struts based on the modified compression-field theory and the softened truss model. The validity of the proposed method is examined by applying to some selected test specimens in literatures and results are compared with recent design code provisions. A general agreement is observed between predicted and measured values at ultimate loading stages in initially uncracked normal-strength concrete test.

• Journal of Animal Environmental Science
• /
• v.18 no.3
• /
• pp.157-164
• /
• 2012

This study was conducted to investigate the effect of different farrowing space, narrow and wide, on the sow performances and piglet growth performances. The $1.5m^2$ of narrow farrowing space was determined as the size of farrowing crate. The $3.0m^2$ of wide space for farrowing sow was the same of farrowing pen to allow the behavior freedom of sow. Baby piglets in the wide farrowing space was protected from crushing of sow by installation of safety bar. The pregnant sows used in this study were stall-housed during gestation and moved to each farrowing spaces on 8 d before parturition. Feed intake, backfat thickness and body condition score of sow were not affected by both farrowing spaces. However, the changes in backfat thickness and body condition score between farrowing and weaning in wide farrowing space were lower (p<0.05) than in narrow farrowing space. The return to estrus of sow was remarkably decreased in wide farrowing space compared to sows in narrow farrowing space. The lower number of stillbirth and higher mortality of piglets were observed in wide farrowing space. From the results, although wide farrowing space could be practically acceptable in terms of sow performances, possible cause of mortality of piglets should be scrutinized through observation of piglet and sow behaviors.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.2
• /
• pp.90-103
• /
• 2005

Objective: This study was carried out to assess the status of working environments, to improve the working environments, and to be helpful to prevent occupational disease. Methods: The authors measured the noise level, concentration of dust, heavy metals, organic solvents, and other chemicals at 95 industries (22 working processes) by type of working process in manufacturing industry of parts and accessories for motor vehicles and its engines from January to December 2003. Samples were measured and analyzed by regulations of Korea Ministry of Labor, manuals of National Institute for Occupational Safety and Health (NIOSH) and Occupational Safety and Health Administration (OSHA). Results: Results are as follows. 1. Major processes exceeding mean noise levels provided the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value (TLV) were shakeout [97.5 dB(A)]. shot-blast [94.2 dB(A)], pressing [92.9 dB(A)], crushing [91.2 dB(A)], and cleaning [90.6 dB(A)]. 2. Mean concentrations of dusts were not exceeded to the TLV. But concentration on some points of processes as like welding (6.50 mg/m3), foundry (5.24 mg/m3) were exceeded. 3. Mean concentrations of heavy metals were not exceeded to the TLV. 4. Mean concentrations of organic solvents and chemicals were not exceeded to the TLV. 5. Improving rate for working environment were significantly higher in industries with health manager than without (p<0.05), and by increasing the year of working environmental measurement (p<0.01). Conclusions: The results suggest that working processes of exceeding to the TLV will be needed rapid improvement of the working environment, and also the others will be needed positive management of the working environment. Health managers must be recommended to employ in the workplace, and further studies for relationship between working environment and health effects for the workers must be carried out.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.5
• /
• pp.423-430
• /
• 2000

Preparation of sea mustard stem jam (SMSJ) with addition of commercial ingredients, sucrose, high methoxyl pectin (HM pectin) or low methoxyl pectin (LM pectin), organic acid (or its salt), and synthetic strawberry flavor to sea mustard stem paste was investigated. The sea mustard stem paste was produced by crushing sea mustard stem and homogenizing it with 2.5 times water of sea mustard stem, then followed by filtering ($30{\~}35 mesh$), The effects of those ingredients on the physical properties and the sensory score of SMSJ were evaluated. The SMSJ prepared with combination of $65{\%}$ (w/w) sugar, $1.0{\%}$ (w/w) pectin, and $0.3{\%}$ (w/w) citric acid or with combination of $65{\%}$ (w/w) sugar, $1.0{\%}$ (w/w) U pectin, and $0.08{\%}$ (w/w) calcium lactate, which finally adjusted to $62{\cdot}Brix$, was similar to commercial strawberry or apple jam in gel strength, Addition of over $0.06{\%}$ (v/w) synthetic strawberry flavor to sea mustard stem paste showed a good effect of masking the undesirable sea mustard flavor.

• Journal of the Korea Concrete Institute
• /
• v.24 no.3
• /
• pp.259-266
• /
• 2012

A general earthquake resistant design philosophy of ductile frame buildings allows beams to form plastic hinges adjacent to beam-column connections. In order to carry out this design philosophy, the ultimate bond or shear strength of the beam should be greater than the flexural yielding force and should not degrade before reaching its required ductility. The behavior of RC members dominated by bond or shear action reveals a dramatic reduction of energy dissipation in the hysteretic response due to the severe pinching effects. In this study, a method was proposed to predict the deformability of reinforced concrete members with short-span-to-depth-ratios, which would result in bond failure after flexural yielding. Repeated or cyclic loading produces a progressive deterioration of bond that may lead to failure at lower cyclic bond stress levels. Accumulation of bond damage is caused by the propagation of micro-cracks and progressive crushing of concrete in front of the lugs. The proposed method takes into account bond deterioration due to the degradation of concrete in the post yield range. In order to verify bond deformability of the proposed method, the predicted results were compared with the experimental results of RC members reported in the technical literature. Comparisons between the observed and calculated bond deformability of the tested RC members showed reasonably good agreement.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.4
• /
• pp.300-305
• /
• 2005

Purpose: For the reconstruction of maxillofacial defect created by trauma, infection, or tumor etc, the role of microvascular anastomosis or vessel graft has been increased. Many methods has been tried to increase the success rate of microvascular anastomosis. Various anticoagulants and thrombolytic agents have been used to reduce the failure rate of microvascular anastomosis and avoid re-operation. Many drugs, however, have been used in the limited cases because most of these drugs may cause complications, such as allergy, fever or systemic bleeding. This study was performed to evaluate the influence of the Argatroban on patency and thrombosis in microvascular anastomosis when it is used for local irrigation or general administration. Materials & methods: Eight mature rabbits, weighing 2kg, were used. After exposing both femoral veins, the artificial thrombotic model was made by crushing injury using a smooth needle holder, and the transverse incision were made on femoral vein. The animals were divided into 4 groups according to Argatroban administration methods; control group (n=4), topical irrigation of lumen with saline solution; experimental group 1 (n=4), topical irrigation of lumen with Argatroban saline solution; experimental group 2 (n=4), topical irrigation of lumen with heparin followed by intravenous injection of Argatroban; experimental group 3 (n=4), topical irrigation of lumen with Argatroban followed by IV of Argatroban. Microvascular anastomosis was done with 10-0 Ethilon. The patency was evaluated by empty-and-refill test 30 minutes and 3 days after microanastomosis. The thrombus formation was examined 3 days after microanastomosis by surgical microscope. The histologic findings were also examined. Results: 1. Thirty minutes after microvascular anastomosis, the patency of all experimental groups was better than that of control group, but there was no significant difference among groups. 2. Three days after microvascular anastomosis, the patency of all experimental groups was more improved than that of control group (p<0.05). There was no significant difference among experimental groups. 3. Three days after microvascular anastomosis, the amount of thrombus in all experimental groups was less than that of control group (p<0.05). There was no significant difference among experimental groups. 4. Histologically, a lot of luminal thrombus was observed around sutured area in control group. Few luminal thrombus was observed in all experimental groups. The necrotic changes were observed on the sutured vein wall in all specimens. Conclusion: These results indicate that topical irrigation and/or intravenous administration of Argatroban is effective in improving patency and preventing thrombus formation after microvascular anastomosis.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.5
• /
• pp.274-280
• /
• 2005

Enormous amount of oyster-shell waste has been illegally disposed at oyster farm sites along the southern coast of Korea and then made a serious problem in environmental side. To increase the consumption of oyster shell meal as a soil amendment, the effects of oyster shell meal on soil properties and spring Chinese cabbage productivity were evaluated in silt loam soil to which 0, 4, 8, 12 and $16Mg\;ha^{-1}$ of oyster-shell meal fertilizer were added. Hydrated lime treatment ($2Mg\;ha^{-1}$) was selected as a control. Oyster-shell meal fertilizer, which made by a simple crushing and has high alkalinity as a calcium materials, had significant effects on neutralizing acid soil and on supplying calcium element. Spring Chinese cabbage yields increased with shell meal application. Plant uptakes of macro-nutrients such as P and C, and micro-nutrient such as B were significantly increased by oyster-shell meal application and then contributed to promote Chinese cabbage growth. The highest yield was achieved following the addition of $8Mg\;ha^{-1}$ shell meal application, and the same yield with that in lime treatment was at the $4Mg\;ha^{-1}$. Oyster-shell meal had more substantial effect on suppling calcium and on improving soil pH than that of lime. In conclusion, oyster shell meal fertilizer could be a good supplement to other inorganic soil amendments to improve nutrient balances in upland soils.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.10
• /
• pp.1510-1518
• /
• 2014

This study investigated the effects of calcium citrate on papain-induced osteoarthritis in C57BL/6J mice. Osteoarthritis was induced by injecting $6{\mu}L$ of papain into the knee joints of mice. Calcium citrate was made by crushing the centrifuged precipitate after reacting 0.5 M citric acid with 1 kg of oyster shell extract. The mice were divided into five groups (n=8). The normal group was untreated, whereas the papain group was induced to have osteoarthritis and treated with $200{\mu}L$ of water per day. The papain+DS group was treated with diclofenac sodium. The papain+calcium citrate groups were treated with calcium citrate at 150 and 300 mg/kg/bw for 28 days. Proteoglycan contents in articular cartilages were measured by safranin O/fast green staining and hematoxylin & eosin staining. Histopathological changes in cartilages were analyzed by the Rudolphi score approach. Contents of pro-inflammatory cytokines including TNF-${\alpha}$, IL-$1{\beta}$ and IL-6 in plasma, were measured by the ELISA method. Body weights among the treated groups were not significantly different compared with that of the normal group. Cartilage loss and joint instability in the calcium citrate group improved significantly (P<0.05) in a dose-dependent manner compared with the papain group. Further, proteoglycan content of the calcium citrate group was considerably (P<0.05) higher than that of the papain group. Osteoarthritis scores in the calcium citrate group were considerably (P<0.05) reduced compared with the papain group. In the group treated with calcium citrate, contents of TNF-${\alpha}$, IL-$1{\beta}$ and IL-6 in plasma were significantly (P<0.05) reduced in a dose-dependent manner in comparison with the normal group. Based on these results, we suggest that calcium citrate is effective for treatment of osteoarthritis.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.11
• /
• pp.1615-1634
• /
• 2004

A review was undertaken to obtain information on the sustainability of pig free-range production systems including the management, performance and health of pigs in the system. Modern outdoor rearing systems requires simple portable and flexible housing with low cost fencing. Local pig breeds and outdoor-adapted breeds for certain environment are generally more suitable for free-range systems. Free-range farms should be located in a low rainfall area and paddocks should be relatively flat, with light topsoil overlying free-draining subsoil with the absence of sharp stones that can cause foot damage. Huts or shelters are crucial for protecting pigs from direct sun burn and heat stress, especially when shade from trees and other facilities is not available. Pigs commonly graze on strip pastures and are rotated between paddocks. The zones of thermal comfort for the sow and piglet differ markedly; between 12-22$^{\circ}C$ for the sow and 30-37$^{\circ}C$ for piglets. Offering wallows for free-range pigs meets their behavioural requirements, and also overcomes the effects of high ambient temperatures on feed intake. Pigs can increase their evaporative heat loss via an increase in the proportion of wet skin by using a wallow, or through water drips and spray. Mud from wallows can also coat the skin of pigs, preventing sunburn. Under grazing conditions, it is difficult to control the fibre intake of pigs although a high energy, low fibre diet can be used. In some countries outdoor sows are fitted with nose rings to prevent them from uprooting the grass. This reduces nutrient leaching of the land due to less rooting. In general, free-range pigs have a higher mortality compared to intensively housed pigs. Many factors can contribute to the death of the piglet including crushing, disease, heat stress and poor nutrition. With successful management, free-range pigs can have similar production to door pigs, although the growth rate of the litters is affected by season. Piglets grow quicker indoors during the cold season compared to outdoor systems. Pigs reared outdoors show calmer behaviour. Aggressive interactions during feeding are lower compared to indoor pigs while outdoor sows are more active than indoor sows. Outdoor pigs have a higher parasite burden, which increases the nutrient requirement for maintenance and reduces their feed utilization efficiency. Parasite infections in free-range pigs also risks the image of free-range pork as a clean and safe product. Diseases can be controlled to a certain degree by grazing management. Frequent rotation is required although most farmers are keeping their pigs for a longer period before rotating. The concept of using pasture species to minimise nematode infections in grazing pigs looks promising. Plants that can be grown locally and used as part of the normal feeding regime are most likely to be acceptable to farmers, particularly organic farmers. However, one of the key concerns from the public for free-range pig production system is the impact on the environment. In the past, the pigs were held in the same paddock at a high stocking rate, which resulted in damage to the vegetation, nutrient loading in the soil, nitrate leaching and gas emission. To avoid this, outdoor pigs should be integrated in the cropping pasture system, the stock should be mobile and stocking rate related to the amount of feed given to the animals.