• 제목/요약/키워드: crown surface area

검색결과 96건 처리시간 0.022초

IPS Empress 도재관의 파절강도: 하악 중절치에서 절단연 삭제량과 축면 경사도에 따른 영향 (Fracture Resistance and Stress Distribution of All Ceramic Crowns with Two Types of Finish Line on Maxillary Central Incisor)

  • 남영성;김계순;정영찬;김유리;동진근
    • 구강회복응용과학지
    • /
    • 제19권3호
    • /
    • pp.207-217
    • /
    • 2003
  • The purpose of this study was to compare the fracture strength of the IPS Empress ceramic crown according to the incisal depth (1.5mm, 2.0mm, 2.5mm) and axial inclination ($4^{\circ}$, $8^{\circ}$, $12^{\circ}$) of the lower central ncisor. After 10 metal dies were made for each group, the IPS Empress ceramic crowns were fabricated and each crown was cemented on each metal die with resin cement. The cemented crowns mounted on the testing jig were inclined 30 degrees and a universal testing machine was used to measure the fracture strength. The results of this study were as follows : The fracture strength of the ceramic crown with 2.0mm depth and $12^{\circ}$ inclination was the highest (648 N). Crowns of 1.5mm depth and $4^{\circ}$ inclination had the lowest strength (482 N). There were no significant differences of the fracture strength by axial inclination in same incisal depth group. The fracture mode of the crowns was similar. Most of fracture lines began at the loading area and extended through proximal surface perpendicular to the margin irrespective of incisal depth. There had correlation between fracture strength and fractured surface area.

고로쇠나무(Acer Mono)의 수액출수에 미치는 환경요인과 그 군락의 자원화에 관한 연구 (2): 환경요인 및 공시목의 회복 (Studies on the Environmental Factors for Sap Exudation of Acer mono and the Resource Development of its Community (2): Environmental Factors and Tree Recovery)

  • Kim, Chul-Soo;Kwak, Ae-Kyung
    • The Korean Journal of Ecology
    • /
    • 제17권4호
    • /
    • pp.533-545
    • /
    • 1994
  • The bleeding of 39 Acer mono trunks by wounding was investigated at the altitudes of 400m, 500m, 800m, and 1100m on Wangsirobong (1,214m), Mt. Chiri area (127°34'E., 35°14'N.) from February 4 to March 21, 1993 and from February 23 to March 23, 1994. The amount of sap in a day was clodely related to the change of air temperature and wind speed. Especially, the abundant sap was exudated at the ranges of -4~13℃ in the daily range of temperature and it was below 0.14m/s in wind speed. The most abundant bleeding was exudated from Acer mono trunk located south facing slope in 800m altitude. Also the amount of sap increased with incereasing suface area of crown. The maximum bleeding of sap was collected from the hole punctured at 80cm height from the ground surface at southern part of the trunks. And the number of exudation holes had an important effect on bleeding of sap but the number of holes should be controlled by DBH of trunks. These results suggested that the exudation was influenced by the daily range of temperature and wind speed. And the altitude, direction of sloped where the trees occurred, surface area of crown, the number of exudation holes, height form the ground surface and the direction of the hole was 91.6% when germicide (Dimethyl-4,4' -ophenylene bis 3-thio alonate) was treated from April to October after bleeding of sap in the year.

  • PDF

교합면의 교모형태에 따른 치과용 모형 스캐너의 정확도 평가 (Accuracy evaluation of dental model scanner according to occlusal attrition type)

  • 김동연;김지환;이범일;이주희;김원수;박진영
    • 대한치과기공학회지
    • /
    • 제42권4호
    • /
    • pp.313-320
    • /
    • 2020
  • Purpose: The purpose of this study is to compare and analyze the accuracy of single crowns based on the type of occlusal surface. Methods: A single crown wax pattern was fabricated in three types of occlusal surface. The prepared wax pattern was replicated with silicone, and stone was injected to create a stone model. The prepared specimens were scanned using a model scanner. Scans were classified into three groups, and each scan was performed six times to analyze the trueness and precision of a single crown. In addition, only the occlusal surface area was analyzed for trueness and precision. Data were analyzed using the Kruskal-Wallis H test, a nonparametric test (α=0.05). Results: With regard to the trueness value of the occlusal scan area, the no occlusal tooth attrition (NA) group showed the largest error of 3.5 ㎛, and the complete occlusal tooth attrition (CA) group showed the lowest value of 3.1 ㎛. The NA group had the greatest precision, and the medium occlusal tooth attrition (MA) group and CA group showed a low precision value of 3.2 ㎛; the difference between the groups was statistically significant (α=0.05). In the color difference map, the CA group showed a lower error than the NA group. Conclusion: The occlusal surface with severe attrition had excellent accuracy, but the accuracy of the group without attrition was low. There were significant differences between groups, but clinically acceptable values were shown.

IPS-Empress 도재관의 변연형태에 따른 파절강도에 관한 연구 (A STUDY ON THE FRACTURE STRENGTH OF THE IPS-EMPRESS CERAMIC CROWN ACCORDING TO MARGIN TYPE)

  • 김현수;주태훈;오상천;동진근
    • 대한치과보철학회지
    • /
    • 제35권2호
    • /
    • pp.296-307
    • /
    • 1997
  • The purpose of this study was to compare the fracture strength of the IPS-Empress ceramic crown according to margin types such as bevel, shoulder, rounded shoulder, shoulder with bevel, rounded shoulder with bevel and bevel with groove. After 10 metal dies were constructed for each group, the IPS-Empress ceramic crown were fabricated and each crown was cemented on each metal die with Bistite resin cement. The cemented crowns mounted in the testing jig were inclined 30 degree and universal testing machine (Zwick 1456 41, Zwick Co., Germany) was used to measure the fracture strength. The obtained results were as follows : 1. The fracture strength of the crown with rounded shoulder was the highest of all. The mean fracture strength was 484N in rounded shoulder, 357N in bevel, 341N in rounded shoulder with bevl, 300N in shoulder with bevel, 280N in shoulder and 275N in bevel with groove. 2. The fracture strength of rounded shoulder was statistically different from those of shoulder with bevel, shoulder and beve41 with groove. 3. In the strain at fracture, there was no significant difference among each group. 4. The fracture mode of the crown was similar and most of fracture line began at the loading area and extended through proximal surface perpendicularly to the margin, irrespective of margin type.

  • PDF

영구치의 치아크기에 관한 연구 (A STUDY ON THE SIZE OF THE PERMANENT TEETH)

  • 백병주;박정렬;김재곤;이두철
    • 대한소아치과학회지
    • /
    • 제30권3호
    • /
    • pp.502-509
    • /
    • 2003
  • 전북대학교에 재학중인 학생 800명을 대상으로 구강 검사를 시행하여 정상교합자로 판단되는 86명(남자 43명, 여자 43명, 평균나이 22.2세)의 석고모형을 채득하여 분석한 결과 다음과 같은 결론을 얻었다. 1. 계측자내 오차는 순(협)설 치관 직경에서 상악 측절치가, 근원심 치관 직경에서는 상악 제 1대구치, 상악 제2대구치에서 다소 큰 값을 나타내었다. 평균 계측 오차는 순(협)설 치관 직경 측정은 0.051mm, 근원심 치관 직경 측정은 0.083mm 였다. 2. 좌우측 계측치 간의 차이는 순(협)설 치관 직경에서 평균 0.030mm, 근원심 치관 직경에서 평균 0.037mm를 보였으며, 통계학적으로 좌우측 계측치간의 유의한 차이는 없었다. 3. 영구치의 순(협)설 및 근원심 치관 직경은 전체 영구치에서 남자가 여자보다 컸다. 통계학적으로 유의성이 있는 치아는 순(협)설 치관 직경에서 상악 측절치, 상악 견치, 상악 제2소구치, 상악 제1대구치 상악 제2대구치, 하악 중절치, 하악견치, 하악 제2소구치, 하악 제1대구치 등이었고, 근원심 치관 직경에서 상악 중절치, 상악견치, 하악 견치, 하악 제1대구치 등이었다. 4. 남녀의 성차가 가장 인정되는 치아는 순(협)설 치관 직경에서는 상악 측절치, 근원심 치관 직경에서는 하악 견치였다. 5. Crown index는 남녀간에 비슷한 값을 보였고, Crown module과 Crown area는 모든 값에서 남자의 계측치가 컸다. 순(설)측 치관 직경값과 근원심 치관 직경값의 곱으로 표현되는 Crown area는 상악 제 1소구치, 하악 측절치, 하악 제 1소구치, 하악 2제소구치, 하악 제2대구치를 제외한 모든 치아에서 남녀간 차이에 통계학적 유의성이 있었다.(p<0.05)., 저염의 확산 폭이 약 10 km정도 증가하는 것으로 나타났고, 외해에 있어서 저염수는 남서풍에 의해서는 남동방향으로 그리고 북서풍에 의해서는 남서방향으로 퍼져나가는 양상을 보였다. 양쯔강에서 유출되는 평균적인 담수량에 의한 관성력과 조류의 힘만으로는 저염수가 제주도까지 도달하는 것은 힘들겠지만, 바람장과 북상하는 난류의 흐름이 합쳐질 때는 충분히 제주도 인근 해역까지 그 영향을 미칠 수 있을 것으로 예측되었다.수가 낮아지고, 소수 기회종의 우점도가 높아진 것으로 보인다.의 표면양상이 관찰되었고, 군간 별다른 차이가 없었다. 즉, 활성형 BR인 CS은 $C_{27}-BRs$, $C_{28}-BRs$의 생합성 과정뿐만 아니라 $C_{29}-BRs$의 생합성 과정을 통하여 생성되는 과정이 식물체내에 존재함을 확인 할 수 있었다.한 one-bottle 접착 시스템과 통계학적으로 유의한 차이를 보이지 않았다.y tissue layer thinning은 3 군모두에서 관찰되었고 항암 3 일군이 가장 심하게 나타났다. 이상의 실험결과를 보면 술전 항암제투여가 초기에 시행한 경우에는 조직의 치유에 초기 5 일정도까지는 영향을 미치나 7 일이 지나면 정상범주로 회복함을 알수 있었고 실험결과 항암제 투여후 3 일째 피판 형성한 군에서 피판치유가 늦어진 것으로 관찰되어 인체에서 항암 투여후 수술시기는 인체면역계가 회복하는 시기를 3주이상 경과후 적어도 4주째 수술시기를 정하는 것이 유리하리라 생각되었다.한 복합레진은 개발의 초기단계이며, 물성의 증가를 위한 연구가 필요할 것으로 사료된다.또 다른 약물인 glycyrrhetinic acid($100{\mu}M$)도 CCh 자극으로

  • PDF

Adsorption and Separation of U (VI), Co (II), and Dy (III) Metal Ions on Crown Synthetic Resin

  • Kim, Joon-Tae
    • 통합자연과학논문집
    • /
    • 제10권1호
    • /
    • pp.43-50
    • /
    • 2017
  • Synthetic resins were combined 1-aza-12-crown-4 macrocyclic ligand with styrene divinylbenzene copolymer having 1%, 2%, 8%, and 16% crosslink by a substitution reaction. These synthetic resins were confirmed by chlorine content, elementary analysis, SEM, surface area, and IR-spectrum. As the results of the effects of pH, crosslink of synthetic resin, and dielectric constant of a solvent on metal ion adsorption for resin adsorbent, the metal ions showed high adsorption at pH 3 or over. Adsorption selectivity for the resin in ethanol solvent was the order of uranium ($UO_2{^{2+}}$) > cobalt ($Co^{2+}$) > dysprosium ($Dy^{3+}$) ion, adsorbability of the metal ion was the crosslink in order of 1%, 2%, 8%, and 16% and it was increased with the lower dielectric constant. In addition, theses metal ions could be separated in the column with 1% crosslink resin by using nitric acid (pH 2.0) as an eluent.

1-Aza-15-Crown-5-Styrene (위험물)-DVB 수지에 의한 희토류 금속 이온들의 흡착 특성 (Adsorption Characteristic of Rare Earth Metal Ions on 1-Aza-15-Crown-5-Styrene (Hazardous Materials)-DVB Resin)

  • 노기환;김관천;김선화;김준태
    • 공업화학
    • /
    • 제20권1호
    • /
    • pp.21-27
    • /
    • 2009
  • 1%, 2%, 5% 및 20%의 가교도를 가진 스타이렌(제4류 위험물) 디비닐벤젠 공중합체에 1-aza-15-crown-5 거대고리 리간드를 치환반응으로 결합시켜 수지를 합성하였으며, 이들 수지의 특성은 염소 함량, 원소 분석, 열 중량 분석, 비표면적(BET), 그리고 적외선 분광법으로 확인하였다. 수지 흡착제에 대한 금속 이온의 흡착에 미치는 pH, 시간, 수지의 가교도 그리고 용매의 유전상수에 따른 영향들을 조사한 결과 금속 이온들은 pH 3 이상에서 큰 흡착율을 보였으며, 금속 이온들의 흡착 평형은 2 h 정도였다. 한편, 에탄올 용매에서 수지에 대한 흡착 선택성은 우라늄($UO_2^{2+}$) > 망간 ($Mn^{2+}$) > 프라세듐($Pr^{3+}$) 이온이었고, 금속 이온의 흡착력은 1%, 2%, 5% 및 20%의 가교도 순이며, 용매의 유전상수 크기에 반비례하였다.

IPS Empress 도재관의 파절강도 : 상악 견치에서 절단연 삭제량과 축면 경사도에 따른 영향 (FRACTURE STRENGTH OF THE IPS EMPRESS CROWN : THE EFFECTS OF INCISAL REDUCTION AND AXIAL INCLINATION ON UPPER CANINE)

  • 신동국;강한중;박용석;박광수;동진근
    • 대한치과보철학회지
    • /
    • 제43권1호
    • /
    • pp.30-40
    • /
    • 2005
  • Purpose. The purpose of this study was to compare the fracture strength of the IPS Empress ceramic crown according to the incisal reduction (2.0mm, 2.5mm, 3.0mm) and axial inclination ($4^{\circ}$, $8^{\circ}$, $12^{\circ}$) of the upper canine. Material and methods. After 10 metal dies were made for each group, the IPS Empress ceramic crowns were fabricated and each crown was cemented on each metal die with resin cement. The cemented crowns mounted on the testing jig were inclined 30 degrees and the universal testing machine was used to measure the fracture strength. Results. 1. The fracture strength of the ceramic crown with 3.0mm depth and $12^{\circ}$ inclination was the highest (839N) Crowns of 2.0mm depth and $12^{\circ}$ inclination had the lowest strength (559N). 2. There was no significant difference in the fracture strength by axial inclination in the same incisal reduction group. 3. The fracture mode of the crowns was similar. Most of fracture lines began at the loading area and extended through proximal surface perpendicular to the margin irrespective of incisal reduction.

전부 도재관을 위한 지대치의 마무리선 형태와 절단연 삭제량 및 교합력 작용점에 따른 응력 분포에 관한 삼차원 유한요소법적 연구 (THREE-DIMENSIONAL FINITE ELEMENT ANALYSIS OF STRESS DISTRIBUTION IN ALL-CERAMIC CROWNS WITH VARIOUS FINISH LINE DESIGNS AND INCISAL REDUCTIONS UNDER DIFFERENT LOADING CONDITIONS)

  • 고은숙;이선형;양재호;정헌영
    • 대한치과보철학회지
    • /
    • 제35권4호
    • /
    • pp.742-766
    • /
    • 1997
  • The purpose of this study was to determine the effect of finish line design, amount of incisal reduction, and loading condition on the stress distribution in anterior all-ceramic crowns. Three-dimensional finite element models of an incisor all-ceramic crown with 3 different finish line designs : 1) shoulder with sharp line angle 2) shoulder with rounded line angle 3) chamfer : and 2 different incisal reductions : 2mm and 4mm were developed. 300 N force with the direction of 45 degree to the long axis of the tooth was applied at 3 different positions : A) incisal 1/3, B) incisal edge, C) cervical 1/5. Stresses developed in ceramic and cement were analyzed using three-dimensional finite element method. The results were as follows : 1. Stresses were concentrated in the margin region, which were primarily compressive in the labial and tensile in the lingual. 2. Stresses were larger in the area near line angle than on the crown surface of the margin region. In case of shoulder with sharp line angle, stresses were highly concentrated in the porcelain near line angle. 3. At the interface between porcelain and cement and at the porcelain above the margin on crown surface, stresses were the highest in chamfer, and decreased in shoulder with sharp line angle and shoulder with rounded line angle, respectively. 4. At the interface between cement and abutment on crown surface, stresses were the highest in shoulder with sharp line angle, and decreased in shoulder with rounded line angle and chamfer, respectively. 5. The amount of incisal reduction had little influence on the stress distribution in all-ceramic crowns. 6. When load was applied at the incisal edge, higher stresses were developed in the margin region and the incisal edge than under the other loading conditions. 7. When load was applied at the cervical 1/5, stresses were very low as a whole.

  • PDF

터널 굴착시 지반거동에 관한 연구 (A Study on Ground Behavior during Tunnel Excavation)

  • 신종호;유태성
    • 한국지반공학회지:지반
    • /
    • 제1권1호
    • /
    • pp.31-46
    • /
    • 1985
  • 최근, 새로운 터널공법으로 국내외에서 널리 적용되고 있는 NATM공법은 터널굴착과정에서 지각의 거동을 현장계측을 통하여 관측, 그 결과를 설계 및 시공에 반영하여, 터널의 안정성과 시공의 합리성을 추구하는 것이 그 특징이라 할 수 있다. 서울시 지하철의 경우, NATM공법은 주로 도심지 난공사구간에서 채택되었다. 따라서 안전한 터널 시공을 위한 현장계측은 NATM터널 전구간에 대하여 총범위하게 실액되었다. 본 연구에서는 지반업반, 터널의 기하학적 형상 및 굴착공법 등을 고려할 때 특징적인 조건을 가지고 있는 5개의 대표적인 계측구간에 대한 측정결과를 분석하여 지반의 거동을 파락하고자 하였다. 터널좌 굴착에 있어서 중요한 의미를 가지는 지반의 거동으로는 지표 및 터널 주변 구조물의 안정성과 관련된 지표심하와, 시공의 안정문제에 관련된 터널의 변형 등으로서, 본고에서는 주로 지표심하 및 천단심하의 거동특성을 여러 가지 영향요인의 관점에서 고찰하였다.

  • PDF