• Journal of Pharmaceutical Investigation
• /
• 제24권4호
• /
• pp.251-256
• /
• 1994

Polypropylene glycol (M.W. 4000) was crosslinked and chain-extended by using triisocyanate and diisocyanate to synthesize rubbery and water swellable hydrogels. Model drugs, i.e., sodium salicylate and indomethacin were incorporated in the polymer matrices by swelling loading. The drug release rates of drugs could be regulated by varying the degrees of crosslinking and chain-extension. Whereas, no correlation was observed between the drug release profiles and the swelling behaviours of the matrices. The release of drugs from the matrices was considered to be governed by the mobility and mesh size of the polymer chains in the matrices.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.356-356
• /
• 2006

The use of renewable feedstock is an important issue to reduce the fossil fuel consumption. In this contribution, we report the cationic ring-opening polymerization of a 2-oxazoline monomer with soybean fatty acid side chains (SoyOx) under microwave irradiation. Kinetic experiments were performed to investigate the livingness of the polymerization in both acetonitrile and in the absence of solvent. In addition, both block and statistical copolymers were prepared using the SoyOx monomer. The synthesized (co)polymers were crosslinked under UV-irradiation resulting in insoluble polymeric materials and core-crosslinked micelles.

• 방사선산업학회지
• /
• 제2권3호
• /
• pp.105-110
• /
• 2008

Poly (VDF-co-HFP)/PEGDMA nanofibrous membranes (NFMs) have been prepared by an electrospinning process. Since electrospun NFMs have a nanoporous structure, they have a potential application for a polymer electrolyte or a separator. Poly (VDF-co-HFP) is a polymer electrolyte binder. In order to improve their mechanical properties, poly (VDF-co-HFP)/PEGDMA NFMs were crosslinked by a gamma-ray irradiation. Then the crosslinked NFMs were characterized through an electrolyte uptake, IR structural analysis, and SEM morphological investigation.

• Bulletin of the Korean Chemical Society
• /
• 제17권5호
• /
• pp.443-447
• /
• 1996

Several polysilanes with sterically bulky substituents such as poly(2-phenylpropyl)(n-hexyl)silane were prepared by Wurtz-type coupling. The polysilane products were mixtures of low-molecular-weight polymers (&bar{M};w~103) as major and high-molecular-weight polymers (&bar{M};w~106) as minor. Overall yields for polysilanes were in the range of 81-99%. λmax of liquid low MW polymers appeared at around 280 nm. Formations of solid high MW polymers were decreased by a longer reaction time and increased steric bulkiness of substituents. High MW polymers with λmax at 327 nm except crosslinked polymers were soluble in common organic solvents and found to be light sensitive. Crosslinked high MW polymer gave 21% TGA ceramic yield, compared with linear high polymer giving zero ceramic yield.

• Bulletin of the Korean Chemical Society
• /
• 제19권11호
• /
• pp.1168-1171
• /
• 1998

Two kinds of second-order nonlinear optical copolymers were prepared by the copolymerization of the vinyl monomers containing NLO chromophore, methacrylic acid, and methyl methacrylate or butyl methacrylate. Glass transition temperatures (Tg of copolymers were around 130 ℃. The copolymers were soluble in common organic solvents such as tetrahydrofuran (THF), cyclohexanone, and N,N-dimethylformamide (DMF). The crosslinked copolymer was obtained by thermal treatment using pentaerythritol tetrakis(2-mercaptoacetate) as a crosslinker and became insoluble in tetrahydrofuran (THF) and N,N-dimethylformamide (DMF). Poling was carried out at 120 ℃ for 20 min and identified with UV-Vis spectroscopy. Electro-optic coefficient (r33) measurement showed a value of 35 pm/V for polymer 2 at 633 nm. Temporal stability of copolymers was improved owing to the crosslinked network, which was successfully obtained at 170 ℃ for 30 min after poling.

• Bulletin of the Korean Chemical Society
• /
• 제13권3호
• /
• pp.274-279
• /
• 1992

Immobilization method of lariat azacrown ethers, containing hydroxyl group in the side arm of crown ring, on the polymer matrix and the phase-transfer catalytic activity of thus obtained immobilized lariat azacrown ethers were studied. Polystyrene resins with crown ether structures and hydroxyl groups adjacent to the macrorings were prepared by the reaction of crosslinked polystyrene resins containing epoxy groups with monoaza-15-crown-5 or monoaza-18-crown-6. Microporous crosslinked polystyrene resins containing epoxy group for the syntheses of these immobilized lariat crown catalysts were prepared by suspension polymerization of styrene, divinylbenzene (DVB 2%) and vinylbenzylglycidyl ether. The immobilized lariat catalysts with 10-20% ring substitution exhibited maximal activity for the halogen exchange reactions of 1-bromooctane with aqueous KI or NaI under triphase heterogeneous conditions. Immobilized catalyst exhibited higher activity than corresponding catalyst without the hydroxyl group and this result was suggested that the active site have a structure in which the $K^+$ ion was bound by the cooperative coordination of the crown ring donors and the hydroxyl group in the side arm.

• Macromolecular Research
• /
• 제17권5호
• /
• pp.325-331
• /
• 2009

The synthesis and the characterization of crosslinked ABC triblock copolymer, i.e. polystyrene-b-poly (hydroxyethyl methacrylate)-b-poly(styrene sulfonic acid), (PS-b-PHEMA-b-PSSA) is reported. PS-b-PHEMA-b-PSSA triblock copolymer at 20:10:70 wt% was sequentially synthesized via atom transfer radical polymerization (ATRP). The middle block was crosslinked by sulfosuccinic acid (SA) via the esterification reaction between -OH of PHEMA and -COOH of SA, as demonstrated by FTIR spectroscopy. As increasing amounts of SA, ion exchange capacity (IEC) continuously increased from 2.13 to 2.82 meq/g but water uptake decreased from 181.8 to 82.7%, resulting from the competitive effect between crosslinked structure and the increasing concentration of sulfonic acid group. A maximum proton conductivity of crosslinked triblock copolymer membrane at room temperature reached up to 0.198 S/cm at 3.8 w% of SA, which was more than two-fold higher than that of Nafion 117(0.08 S/cm). Transmission electron microscopy (TEM) analysis clearly showed that the PS-b-PHEMA-b-PSSA triblock copolymer is microphase-separated with a nanometer range and well developed to provide the connectivity of ionic PSSA domains. The membranes exhibited the good thermal properties up to $250^{\circ}C$ presumably resulting from the microphase-separated and crosslinked structure of the membranes, as revealed by thermal gravimetric analysis (TGA).

• 폴리머
• /
• 제28권1호
• /
• pp.92-102
• /
• 2004

하이드록시프로필 셀룰로오스를 6-콜레스테릴옥시카보닐펜타노일 클로라이드와 반응시켜 에스터화도가 2.25-2.91 범위의 값을 갖는 6-콜레스테릴옥시카보닐펜톡시프로필 셀룰로오스들을 합성하였다. 또한 6-콜레스테릴옥시카보닐펜톡시프로필 셀룰로오스의 아크릴산 에스터들과 액정질서를 지닌 이들의 광가교 필름들을 합성하였다. 미가교와 가교시료들의 열방성 액정의 특성과 아세톤 중에서의 가교시료들의 팽윤거동을 검토하였다. 하이드록시프로필 셀룰로오스는 쌍방성 콜레스테릭 상을 형성하는 반면 모든 콜레스테릴을 지닌 미가교 시료들은 단방성 콜레스테릭 상을 형성하였다. 6-콜레스테릴옥시카보닐펜타노일 클로라이드는 단방성 스멕틱 상도 형성하였다. 하이드록시프로필 셀룰로오스는 광학 피치 (λ$_{m}$ )가 온도상승에 의해 증가하는 우측방향의 나선을 형성하는 반면 모든 미가교 유도체들은 λ$_{m}$ 이 온도상승에 의해 감소하는 좌측방향의 나선들을 형성하였다. 6-콜레스테릴옥시카보닐펜톡시프로필 셀룰로오스와 이의 아크릴산 에스터의 액정상의 열적 안정성과 동일한 온도에서의 λ$_{m}$ 의 크기는 에스터화도가 증가함에 따라 감소하였다. 모든 가교시료들은 6-콜레스테릴옥시카보닐펜톡시프로필 셀룰로오스의 아크릴산 에스터들과 달리 반사색깔을 나타내지 않았으며 액정질서를 지닌 가교젤의 특징적인 이방성 팽윤을 나타냈다.

• 폴리머
• /
• 제24권2호
• /
• pp.252-258
• /
• 2000

4-비닐피리딘과 N,N'-1,6-헥사메틸렌비스아크릴아미드를 라디칼중합하여 여러 가지 가교도를 가지는 가교 폴리(4-비닐피리딘) (CHP4VP)을 합성하였고, 이들 가교고분자와 구리(II)와의 착물을 평형흡착법으로 제조하였다. 제조한 착물들을 ascorbic acid (AA)의 산화반응 촉매로 사용하여 촉매활성을 조사하였다. CHP4VP-Cu(II) 착물에 의한 AA 산화반응은 Michaelis-Menten형 동력학적 거동을 나타내었다. CHP4VP-Cu(II) 촉매계의 촉매활성은 CHP4VP의 가교도가 증가할수록 증가하였고, 또 CHP4VP-Cu(II) 착물은 재사용 후에도 촉매활성이 거의 감소하지 않았다. 그러나 CHP4VP-Cu(II) 착물은 전보의 N,N'-메틸렌비스아크릴아미드가 가교제로 포함된 가교 폴리(4-비닐피리딘)-구리(II) 착물보다 AA 산화반응에 대한 촉매활성이 감소하는 경향을 나타내었다. 이들 결과로 부터 촉매계에 포함된 CHP4VP의 가교도와 가교제의 소수성이 AA 산화반응에 중요한 역할을 함을 알 수 있었다.

• Macromolecular Research
• /
• 제17권5호
• /
• pp.339-345
• /
• 2009

The core/shell type structure of the highly crosslinked poly(glycidylmetharylate-co-divinylbenzene) microspheres prepared in the precipitation polymerization in acetonitrile was thoroughly verified by means of swelling, $^1H$ NMR, XPS, TEM and TGA measurements. In the XPS measurement, the higher the GMA content, the higher the oxygen content was observed, implying that the higher content of GMA is observed in the particle surface. The further verification of the core/shell structure of the poly(GMA-co-DVB) particles was carried out using $^1H$ NMR and TEM techniques, resulting in the poly(GMA-co-DVB) particles with the GMA rich-phase and DVB rich-phase. In overall, the poly(GMA-co-DVB) microspheres consist of a highly crosslinked DVB rich-phase in the core and slightly or non-crosslinked GMA rich-phase in the shell part due to the different reaction ratios between two monomers and self-crosslinking density of DVB.