• 한국운동역학회지
• /
• 제30권1호
• /
• pp.7-16
• /
• 2020

Objective: It is to find factors related to stability through analysis of plantar pressure factors according to the level of instability when performing Snatch. Method: Foot pressure analysis was performed while 10 weightlifters performed 80% of the highest level of Snatch, and motion was classified and analyzed in 3 grades according to the level of instability. Results: First, in Bad Motion, the movement distance of the pressure center in the direction of ML and AP was larger significantly in Phase 2. Second, in Phase 2, the number of zero-crossing in the AP direction was larger statistically significantly in Good Motion. Third, in the bad motion in Phase 3, the number of zero-crossing in the ML direction showed a significantly larger value. Fourth, in Phase 4, it was found that the more stable the lock out motion, the greater the activity of foot controlling in the left and right directions. Fifth, Phase 3, the greater the Maximum/Mean foot pressure value, the more stable the pulling action. Sixth, in Phase 2, the foot pressure was concentrated with a wide distribution in the midfoot and rearfoot. Seventh, the triggering number of the forefoot region was small in the last pull phase. Eighth, the number of triggers in the toe area was significantly higher during Good Motion in Phase 4. Conclusion: Summarizing the factors of instability in Snatch, there was no significant difference in Phase 1 for each condition. In order to enhance the stability in Phase 2, the sensory control ability in the AP direction is required, and focusing the foot pressing motion with a wide distribution in the middle and rear parts increases the instability. In Phase 3, it was found that the more unstable, the more sensory control activity was performed in the ML direction, the stronger the forefoot pressing action should be performed for a stable Snatch. In Phase 4, It is important that the feet sensory control activity in ML directions and the control ability of the toes in order to have stable Lock out motion.

• Nuclear Engineering and Technology
• /
• 제53권11호
• /
• pp.3790-3797
• /
• 2021

Although the individual channel readout method can improve the performance of PET detectors with pixelated photo-sensors, such as silicon photomultiplier (SiPM), this method leads to a significant increase in the number of readout channels. In this study, we proposed a novel multiplexing method that could effectively reduce the number of readout channels to reduce system complexity and development cost. The proposed multiplexing circuit was designed to generate bipolar pulses with different zero-crossing points by adjusting the time constant of the high-pass filter connected to each channel of a pixelated photo-sensor. The channel position of the detected gamma-ray was identified by estimating the width between the rising edge and the zero-crossing point of the bipolar pulse. In order to evaluate the performance of the proposed multiplexing circuit, four detector blocks, each consisting of a 4 × 4 array of 3 mm × 3 mm × 20 mm LYSO and a 4 × 4 SiPM array, were constructed. The average energy resolution was 13.2 ± 1.1% for all 64 crystal pixels and each pixel position was accurately identified. A coincidence timing resolution was 580 ± 12 ps. The experimental results indicated that the novel multiplexing method proposed in this study is able to effectively reduce the number of readout channels while maintaining accurate position identification with good energy and timing performance. In addition, it could be useful for the development of PET systems consisting of a large number of pixelated detectors.

• 대한교통학회지
• /
• 제24권5호
• /
• pp.57-66
• /
• 2006

본 연구에서는 보행신호시간에 대한 국내 외 사례 분석 광범위한 보행자특성조사, 보행신호시간 운영방법에 대한 설문조사 등을 통해 보행자수요, 보행자특성 및 주변지역 특성 등을 고려한 보행신호시간 산정식을 제안하였으며, 실제 현장 자료를 이용하여 현재의 보행신호시간과 본 연구의 제안식에 의해 산출된 보행신호시간을 비교, 분석하였다. 보행자특성조사는 횡단보행속도와 인지반응시간에 대해 실시하였다. 서울시 총 16개 지역을 선정하여 토지이용, 도로 폭, 연령, 개인/그룹, 성별에 따라 자료를 수집하였다. 분석결과 서울시 보행자의 평균 횡단보행속도는 1.30m/s, 15th percentile속도는 1.11m/s로 나타났다. 인지반응시간은 평균 2.24초로 조사되었다. 횡단보행속도는 토지이용. 도로 폭, 연령, 개인/그룹, 성별에 따라 차이가 있었고, 인지반응시간은 도로 폭, 연령, 개인/그룹에 따라 차이가 있었다. 또한 각 분석결과에 대한 통계 점정을 실시하여 본 연구에서 조사된 자료의 신뢰성을 확보하였다 따라서 이 자료들은 추후 관련 연구에 기본 자료로 활용이 가능할 것이다. 보행자특성 현장조사 및 보행자 설문조사 분석결과를 종합해 보면 현재의 보행신호시간과 그 운영방법은 개선이 시급한 것으로 분석됨에 따라 본 연구에서는 보행자의 수요, 보행자특성 및 횡단보도 기하구조 등을 고려한 합리적인 보행신호시간을 산출할 수 있는 산정식을 개발하였다

• 전자공학회논문지A
• /
• 제33A권4호
• /
• pp.142-151
• /
• 1996

This paper presents a new symmetrical routing architecture for FPGA and an efficient routing algorithm for the architecture. The routing architecture adopts the segmented wires and the improved switch modules. Segmetned wires construct routing channels which pass through the chip in vertical and horizontal directions. To maximize the utility of a track, a track in each switch module can be separated in two part using a programmable switch to route two different net. The proposed routing algorithm finds all assignable tracks for a given net and selects the best track from assignable tracks to minimize the number of programmable switches and the unused portion of the wire segments. In order to stabilize the perfomrance of the algorithm, the routing order is defined by weighted sum of the number of wire segment, the length of wire segmetn, and the number of pin. Experimental results show that routability is improved dramatically and the number of crossing switches are reduced about 40% compared with the previous works.

• 한국산학기술학회논문지
• /
• 제10권9호
• /
• pp.2334-2339
• /
• 2009

터치스크린 기능이 있는 LCD 패널이 부착된 임베디드 시스템의 경우, 사용자 입력 명령의 전달을 위해 사각형, 오각형, 원, 화살표 같은 다양한 도형들이 자주 사용된다. 이 경우, 특정 명령 입력 여부의 판단을 위해 터치된 지점이 그 명령을 의미하는 도형 내에 있는지의 여부를 판단하는 알고리즘이 필요하다. 그러나 이런 알고리즘들은 제한된 컴퓨팅 자원을 갖는 임베디드 시스템의 경우 상당한 오버헤드를 유발 할 수 있다. 본 논문의 목적은 현재 널리 쓰이고 있는 터치 영역 인식 알고리즘들을 구현하고, 그 성능을 평가하여 가장 효율적인 인식 방법을 제시하는데 있다. 따라서 본 논문은 우선 터치스크린 LCD 모듈이 부착된 LN2440SBC 임베디드 보드를 위한 터치스크린의 초기화 및 구동 방법과 터치스크린의 좌표를 LCD 패널의 좌표에 맞춰 조절하는 좌표보정 방법을 설명하고, 다음에 도형 영역의 터치 여부의 판단을 위해 사용 되고 있는 사각형의 범위 검사법, 오각형과 같은 다각형의 교차 수(crossing number) 검사법, 원의 거리 측정법, 그리고 모든 도형들에 적용 가능한 색상 비교법을 구현한다. 이 방법들의 성능평가를 위해, 사각형, 오각형, 원, 그림 등을 그리기 위한 이차원 그래픽스 함수들을 구현하고 도형을 생성한 후, 각 방법에 따라 해당 도형들의 영역 터치 여부를 판단하는데 걸리는 시간을 측정한다. 이 측정 결과, 사각형은 범위 검사법이, 원은 거리 측정법이, 다각형 및 그림을 이용한 도형일 경우에는 색상 비교법이 가장 적합한 것으로 나타났다.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.443-454
• /
• 2016

This study focus to make 8 legs robot based on Jansen's mechanism. In the process of making, we found GL(Ground length),GAC(Ground Angle Coefficient) and the height difference of tract and compare Several models with M.Sketch to find link's Length ratio Optimised simple walking and crossing of obstacles. In the process, our team Analyzed the difference ideal tract (Jansen holy number model's track) contrived by Jansen and our final model tract. As a result, we found optimal link's length ratio to over the obstacles and some features that our model differ from Jansen holy number model. It means that optimal link's length ratio depends on certain circumstances, perfect length ratio is nonexistent.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.107.5-107
• /
• 2002

In this paper, a kinematic optimal design of a new paralleltype rolling mill based upon two Stewart platforms manipulator is investigated. The objective of this new parallel-type rolling mill is to permit an integrated control of the strip thickness, strip shape, pair crossing angle, uniform wear of the rolls, and tension of the strip. A manipulability measure, as the ratio of the manipulability ellipsoid volume and the condition number of a split Jacobian matrix, is defined. Two kinematic parameters, the radius of the base and the angle between two neighboring joints, are optimally designed by maximizing the global manipulability measure in the entire workspace.

• 충청수학회지
• /
• 제30권3호
• /
• pp.331-335
• /
• 2017

We construct Calabi-Yau threefolds by smoothing normal crossing varieties, which are made from the building blocks of $G_2-manifolds$. We compute the Hodge numbers of those Calabi-Yau threefolds. Some of those Hodge number pairs ($h^{1,1}$, $h^{1,2}$) do not overlap with those of Calabi-Yau threefolds constructed in the toric setting.

• 생명과학회지
• /
• 제6권4호
• /
• pp.219-226
• /
• 1996

고수량. 고품질의 고추 신품종을 육성하기 위해 피만의 'California Wonder'와 일본재래종 4품종, 이들의 F$_{1}$ 잡종 12조합 그리고 한국의 F_{1} 3품종을 공시하고, 과실수량과 형태적 특성에 관하여 검토했다. 그 결과 'California Wonder'와 일본재래종간 교잡에 의해 얻어진 F$_{1}$ 잡종은 친품종보다 3일 먼저 개화했다. F$_{1}$ 잡종은 특히 'California Wonder'가 편친이었을 때 친품종보다 고수량 이었다. 또한 일과중도 증가하는 경향 이었다. F$_{1}$ 잡종중에서 'California Wonder' 와 'Fushimi Amanaga' 간 잡종이 가장 고수량 이었다. 자실수와 종자수는 'California Wonder'가 편친이었을 때 친품종보다 많았다. 초장은 친품종보다 F$_{1}$ 잡종이 큰 경향 이었다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권6호
• /
• pp.262-268
• /
• 2005

In this work, to obtain the detailed information about lightning electromagnetic field waveforms, the LabVIEW based-measurement system of time-changing magnetic fields was designed and constructed. The frequency bandwidth of the magnetic field measuring system ranges from 300 [Hz] to 1 [MHz], and the response sensitivity is 2.78 [mV/nT]. Data acquisition system with the resolution of 12 bits and memory capacity of 32 [Mbyte] was triggered by the magnetic field to be measured. The properties and parameters of the magnetic fields produced by cloud discharges were statistically investigated. The magnetic field waveforms radiated from cloud lighting discharges tend to be bipolar, with two or more narrow and several pulses superimposed on the initial front part. The recording length of the magnetic field measurement system is about 10 [ms]. The mean duration of cloud discharges is 1.3 [ms], and the number of outburst pulses for the period is 8 in average. The front times of the magnetic fields are 6.15 [$\mu$s] in average. The the zero-to-zero crossing times that is the initial half-cycle duration is widely dispersed and the mean value is 9.61 [$\mu$s], and the mean value of percentage depth of dip to opposite polarity is 41.1 [$\%$].