• The Journal of Fisheries Business Administration
• /
• v.30 no.1
• /
• pp.119-147
• /
• 1999

This article is subject to the rationalization of the cold-storage warehouse management, which gives the stabilization of the fishery production and the food life with respect to fisheries industry. In this point of view, the article examines to the structure of the cold-storage warehouse industry from the perspective of the industrial organization. To put it concretely, the article intends to apprehend the state of the structure of the industry and analyze the cold-storage warehouse's management activities. In addition, I try to find know the factors that affect the management performance(profitablity) of the industry through the cross-sectional correlation analysis. Finally, the conclusion of the article can be described as follows : \circled1 On the basis of the cold-storage capacity, there is the tendency that the industry concentrate in the area of Pusan(41.7%). \circled2 By formulating step of development of the industry, it is divided by six types. Type I is designed as raw material-storage warehouse for self-processing. Type IIis the raw material-storage warehouse for self-processing and storage-sale warehouse. Type III is the raw material-storage warehouse for self.distribution. Type IV is the raw material-storage warehouse for self-distribution and storage-sale warehouse. Type V is the net storage-sale warehouse. Type Ⅵ is the physical distribution center warehouse. Although each region has one representative type,6 types exist in all regions. \circled3 The competition structure of the industry has double structure on the basis of cold-storage capacity. \circled4 With respect to the management activity of the cold-storage warehouse, there is no change or even a decrease not increasing or not any change in sales from 1996 to 1997 \circled5 In order to try to induce the amount of shipper's materials, services that a cold-storage warehouse supply with its users include a custody-fee discount, a distribution-process service, a finance service, quality management service and so on. One of the best attractive services is the custody-fee service. \circled6 In the structure and management activity of the industry, the factors that affect management performance (profitablity) are a custody-fee discount, sales ability and capital structure of individual firm. Positive factor is sales ability and capital structure of individual firm. But, The custody-fee discount turns out to be a negative capital structure of individual film.

• Proceedings of the KSCN Conference
• /
• 2003.11a
• /
• pp.1048-1048
• /
• 2003

The purpose of this study was to investigate dietary behaviors, body image, hematological index and nutrient intake of female athletes in Incheon. The subjects were 112 female athletes (field and track: n=32, firing: n=27, fencing: n=29, swimming: n=14, badminton: n=10) from middle and high schools in Incheon. This cross-sectional study was conducted by a self-administered questionnaire. Fasting blood samples were obtained and analyzed for hemoglobin (Hb), hematocrit(Hct), ferritin, serum iron, mean corpuscular volume (MCV), mean corpuscular hemoglobin (MCH), mean corpuscular hemoglobin concentration (MCHC), unsaturated iron binding capacity (UBC), total iron binding capacity (TIBC) and transferrin saturation (TS). Nutrient intakes collected from 3 day-recalls were analyzed by the Computer Aided Nutritional Analysis Program. Statistical analysis was conducted using SPSS 10.0 program. The results are summarized as follows: Average age of field and track athletes, firing, fencer and swimmer was 14 years and that of badmintoner was 17 years. Most of female athletes had dietary problems such as unbalanced meals, skipping meals, and preference of processed foods. More than 60% of female athletes skipped breakfast. As for perception of body image, most of female athletes perceived themselves fatter compared to normal body image. Especially, field and track athletes were more significantly experienced weight control compared to the other athletes (p<0.05). As for physical burden during exercise, 56.3% of swimmer and 31.3% of field and track athletes answered “very hard”, which showed a significant difference (p<0.001) More than 80% of female athletes had experienced a vertigo during exercise (p<0.01). Also, more than 50% of female athletes except badmintoner had experienced an irregular menstruation (p<0.05). Average serum iron level (p<0.05) and TS (p<0.05) of field and track athletes were significantly lower compared to the other athletes. Serum ferritin of badmintoner, field and track athletes and fencer was significantly lower compared to firing and swimmer (p<0.05). Nutrient intakes of female athletes except vitamin B6, niacin and phosphorus were lower than the Korean RDA. Especially, calcium and iron intakes of female athletes were under the 50% of the Korean RDA. Therefore, proper nutrition education and supplementation are required for female athletes to encourage desirable food habits as well as to improve their nutritional status and exercise performance.

• Journal of Technology Innovation
• /
• v.23 no.4
• /
• pp.33-61
• /
• 2015

The global economy is rapidly changing by technological innovation and diffusion of knowledge across nations. Therefore it is still important issue to find a major variables for convergence and divergence of economic development. The studies up to present on the relationship between innovation and institution has limitations that they have dealt with this issue only in term of cross-sectional study or mathematical research models. This paper aims at analyzing the impact of innovation capabilities and institutional quality on the economic growth. Empirically this paper will explore the relationship among human capital capacity and FDI, R&D expenditures and innovation capabilities and institutional quality. This paper analyzes 64 countries, which were divided into 4 groups depending on the level of economic development. Based on the data from 1995 to 2011 and by using a panel model, we look at the structural implications of the research questions. According to our analysis, the weight of R&D and the innovation capabilities were identified as important determinants of economic growth, and FDI was significant factor for economic growth in the upper middle group countries. In case of the innovation capabilities of countries, the diffusion and openness of innovation were most meaningful variables for economic growth. Also, institutional quality has a significantly positive impact. However, in the low-level economic group, innovation capabilities and institutions have a negative impact on economic growth. This paper identifies an important policy implications that of national innovation and institutional factors should be properly invested in accordance with the level of a country's economic growth.

• Journal of the Korea Convergence Society
• /
• v.7 no.3
• /
• pp.149-157
• /
• 2016

For workers, industrial accidents exert a bad effect on the productivity, quality of life, and depress the morale. This study aimed to examine the overall influence on job performance of employees who returned to work after industrial accidents. This was a cross-sectional study using the data of 2013 and 2014 Panel Study of Worker's Compensation Insurance (PSWCI), and we performed logistic-regression analysis to analyze an affinity between general characteristics and job performance as independent variable and outcome variable, respectively. As a result, the major factor depressed the job performance were the 1 - 7 degree of disabilities and injuries with convalescence period for 6 to 9month or more than 12 months. In other words, this study shown that job performance was decreased as higher degree of disability and longer convalescence period. Job performance is the factor to identify indirectly worker's successful return to work, and it is important in follow-up of workers who returned to work after industrial accidents. Stable job performance of an industrial disaster victim is the key factor to maintain worker's comfortable and qualitative life as well as increase of productive capacity.

• Journal of the Korea Concrete Institute
• /
• v.19 no.4
• /
• pp.411-420
• /
• 2007

The applicability of headed bars in exterior beam-column joints under reversed cyclic loading was investigated. A total of ten pullout tests were first performed to examine pullout behavior of headed bars subjected to monotonic and cyclic loading with test variables such as connection type between head and bar stem (weld or no weld), loading methods (monotonic or cyclic loading), and head shape (small or large circular head and square head). Two full-scale beam-column joint tests were then performed to compare the structural behavior of exterior beam-column joints constructed using two different reinforcement details: i.e. $90^{\circ}$ standard hooks and headed bars. Both joints were designed following the recommendations of ACI-ASCE Committee 352 for Type 2 performance: i.e. the connection is required to dissipate energy through reversals of deformation into inelastic range. The pullout test results revealed that welded head to the stem did not necessarily result in increased pullout strength when compared to non-welded head. Relatively large circular head resulted in higher peak load than smaller circular and square head. Both beam-column joints with conventional $90^{\circ}$ hooks and headed bars behaved similarly in terms of crack development, hysteresis curves, and peak strengths. The joint using the headed bars showed better overall structural performance in terms of ductility, deformation capacity, and energy dissipation. These experimental results demonstrate that the headed bars using relatively small head can be properly designed far use in external beam-column joint.

• Journal of architectural history
• /
• v.20 no.3
• /
• pp.7-22
• /
• 2011

With the accumulations of outcomes from archaeological excavations of mountain fortress of three kingdoms period, there have been studies about time-periodic territory range of mountain fortress, difference in the way(method) of construction, defence system and so on from various points of view. This is an empirical study on the construction method of the valley part of stone fortress. First of all, it is required to secure large quantity of fresh water for those who lived at mountain fortress. Especially when builders of fortress construct a fortification at the valley part of stone fortress, in advance they must sufficiently consider several options including the establishment of sustainable water resources. First, when it comes to build a fortification on a ridge[or a slope] of a mountain, you have only to consider a vertical stress. However, when it comes to build a fortification at the valley part of a mountain, You must have more sufficient preparations for the constructing process. Because there are not only a vertical stress but also a horizontal pressure simultaneously. Second, a fortification of mountain fortress built by using unit building stone is a structure of masonry construction like brick construction, and the valley part of it is where the construction of the fortification begins. Third, when it comes to build a fortification at the valley part of a mountain, it seems that they use a temporary method such as coffer dam in oder to prevent the collapse of the fortification due to heavy rain. Furthermore, in response to a horizontal pressure a fortification is built by the way of its plane make an arch, or by piling up the soil with the plate method(類似版築) and earthen wall harder method(敷葉) they increase cross-sectional area of the fortification and its cutoff capacity. In front direction they put the reservoir facility for the fear that the hydraulic pressure and earth pressure are directly transmitted to the fortification. The process of constructing the fortification at the valley part of a mountain is done in the same oder as follows; leveling of ground(整地) ${\Rightarrow}$ construction of coffer dam ${\Rightarrow}$ construction of the fortification between the both banks of the valley ${\Rightarrow}$ construction of the fortification at bottom part of spill way(餘水路) between the both banks of the valley ${\Rightarrow}$ construction of spill way(餘水路) & reservoir facility ${\Rightarrow}$ construction of the fortification at upper part of spill way between the both banks of the valley. Coffer dam facility seems to be not only the protection device on occasion of flood but also an important criterion to measure the proper height of spill way or tailrace(放水路). This study has a meaningful significance in that it empirically examines the method of reduction of the horizontal pressure which the fortification at the valley part of a mountain takes, the date the construction was done, and wether the changes in climate such as heavy rainfall influence the process of construction.

• Journal of Korean Society of Steel Construction
• /
• v.27 no.2
• /
• pp.195-205
• /
• 2015

The rahmen bridge is well known common type of bridge in which all members are connected rigidly. The rahmen bridge is built for several situations because it has many advantages such as no need of bridge bearing system, easy of maintenance, reduction of the cross-sectional area of superstructure, and relatively low construction cost compared with other bridge types. Recently, to lengthen the span of rahmen bridge system, steel-concrete composite beam is used for superstructure of rahmen bridge instead of normal concrete girder with slab. However, member forces are increased because of extension of span length of superstructure and substructure is designed and constructed inefficiently when steel-concrete composite rahmen bridge is designed. In this study, new-type steel-concrete composite bridge is suggested. New-type steel-concrete composite rahmen bridge is adopted hinge connection between abutment and foundation for the reduction of the bending momemt at the foundation. In this study, we present the results of experiment conducted to estimate the load carrying capacity of new-type steel-concrete composite rahmen bridge and the structural characteristics of hinge connection.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.126-136
• /
• 2018

A steel-plate concrete composite beam is composed of a steel plate, concrete and shear connector to combine inhomogeneous two materials. The steel plate is assembled by welding an existing composite beam. In this study, new steel-plate concrete composite beam, called a SPC Beam, was developed to reduce the shear connector and improve the workability. The SPC Beam was composed of folding steel plates and concrete, without a shear connector. The folding steel plate was assembled using high strength bolt instead of welding. To improve the workability in field construction, a hat-shaped Cap was attached to the junction with a slab. Monotonic load testing under two points was conducted under displacement control mode. The flexural strength of the specimen for positive moment and negative moment was calculated using the plastic stress distribution method. The test results showed that the flexural strength of the new SPC Beam had 80% of the strength of a complete composite beam. In addition, increasing the composite ratio was possible through clearance controls of the cap. In this study, the performance of the SPC Beam was verified through additional experiments and analyses with the cross-sectional shape and cap as variables, because the representative shape in the positive negative moment region is targeted.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.435-445
• /
• 2018

This study analyzed factors that should be considered in the process of export diversification strategy formulation and priorities of strategies. We reviewed the extant literature and interviewed six experts. Cross-sectional analysis of a literature review and interview results were used to determine the influencing factors of export. The data for this study were collected from a survey of 68 export experts in Automotive Parts enterprises. Data were analyzed using AHP. As a result of the analysis, the order of importance appeared in the order of internal capacity, correlation buyer effect, entry barriers, technology response, and competition environment. The regions with a high overseas level were product differentiation, centralization, and low cost, whereas those with a low level were in the order of low cost, product differentiation, and concentration. It is meaningful to review the alternatives for adoption of the export diversification strategy and establish a strategy appropriate to the situation. It is necessary to establish a customized strategy considering the characteristics of the global region, and not only internal competence but also mutual relationship with local buyers are important.

• Journal of the Korean Electrochemical Society
• /
• v.4 no.3
• /
• pp.104-108
• /
• 2001

Naphthalene derived mesophase pitch WP) was spun into short fibers by using melt-blown technology. The pitch fibers oxidative stabilization were carried out heating rates of $2^{\circ}C/min,\;5^{\circ}C/min\;and\; 10^{\circ}/min$. The heating rate was a key factor to maximate the capacity of the Li-ion secondary battery through controlling the morphology of the graphitized fiber. The diameters of the melt-blown fibers prepared were in the range of $4{\mu}m\~16{\mu}m$ with functions of air jet speed, air temperature and the temperature of the nozzle. The graphitized fibers of $10{\mu}m$ diameters showed various morphological structure with heating rate of the stabilization. Radial, radial-random and skin-core cross-sectional structure of the fibers were observed at the respective heating rate of $2^{\circ}C/min\;5^{\circ}C/min\;and\;10^{\circ}C/min$. Most crystalline structure of graphite was obtained from the fiber stabilized at heating rate of $10^{\circ}C/min$ exhibiting the best anode performance with 400 mAh/g of capacitance and $96.8\%$ of charge/discharge efficiency.