• Journal of The Korean Society of Agricultural Engineers
• /
• v.49 no.5
• /
• pp.3-9
• /
• 2007

In this study, the effect of the purification materials is analyzed and tested by Flow 3D and Hydraulic model test. Three dimension numerical analysis led from the research that sees abnormal form and the size back of the water purification material conferred the flowing water conduct inside the test channel against the test condition. Comparison it analyzed the flux distribution, a water depth of the channel which establishes the water purification materials the cross section, an interval of the water purification material, a conference with general channel, it change executed. As a result, the cross section ratio of the purification materials against and a flux change from the test which it sees. The interval of the purification materials in order to prevent three dimension that follows in decrease of increase and flux must decide an interval.

• Journal of the Korean Ceramic Society
• /
• v.34 no.8
• /
• pp.791-796
• /
• 1997

The influence of Ti/Sr ratio on abnormal grain growth of Nb-doped SrTiO3 was investigated. For specimens which were isothermally sintered at temperatures above 144$0^{\circ}C$, the nucleation and growth rates of abnormal grain growth were decreased with increasing Ti/Sr ratio. But the onset time of abnormal grain growth was increased with increasing Ti/Sr ratio. The cross-section of abnormally grown grains was mostly hexagonal. When the specimens were quenched in air after they reached their setting temperatures at a heating rate of 3$^{\circ}C$/min, the onset temperature of abnormal grain growth was increased with increasing Ti/Sr ratio and the final grain size was independent of Ti/Sr ratio. The cross-section of abnormally grown grains was mostly rectangular.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.77.2-77.2
• /
• 2013

xIn the present work, we explored the effect of the radiation on the effective impact parameter for capture in a fully general relativistic manner. To summarize our results, evidently due to the radiation drag (the Poynting-Robertson effect), critical impact parameter of point particle gets larger by the factor of two, thus, the effective cross section of the luminous relativistic star becomes 4 times larger than that of the star without radiation emission. In addition, the finite size effect of the star adds up to this growth of the effective cross section.

• Progress in Superconductivity and Cryogenics
• /
• v.24 no.3
• /
• pp.7-11
• /
• 2022

We are conducting research and development of magnetic filters for magnetic separation targeting paramagnetic materials. In order to develop a new magnetic filter with a large magnetic gradient, stainless fiber (SUS430, 120 mm × 3 mm) with a triangular cross section was sintered with a high void ratio (~ 70%) and the magnetic filter (20 mm × 2 mm) was created. When this magnetic filter was used to perform magnetic separation of hematite (particle size 50 ㎛) under a maximum magnetic flux density of 1.49 T, high separation rates were obtained.

• Journal of Welding and Joining
• /
• v.25 no.5
• /
• pp.36-44
• /
• 2007

This paper is the first part of the study on the accuracy improvement of numerical analysis of steel welds. The aim of this paper is to raise the accuracy of thermal analysis results, such as the shape and size of the weld cross section and the hardness distribution in HAZ(Heat-Affected Zone). It is known that the factors affecting on the accuracy are thermal properties, metallurgical properties and welding heat source model. It was found that the arbitrary distributed heat source model should be used to predict practical weld cross section shape and size. Also, in order to improve the prediction accuracy of HAZ hardness distribution, it was essential to consider 2 CCT(Continuous Cooling Transformation) diagrams in calculating volume fraction of transformed phases. One is the peak temperature being around melting temperature. The other is the peak temperature being around metallurgical transformation temperature.

• The Research Journal of the Costume Culture
• /
• v.30 no.5
• /
• pp.675-688
• /
• 2022

The purpose of this study is to analyze the body type characteristics of tall adult men aged 20 to 69 years to present base material on body dimensions for men's clothing companies. The research method comprised statistical analysis of 3D measurements after selecting items from the 8th Korean human body size survey related to the torso body types of 495 adult men who were at least 178cm tall. As a result, six factors were extracted, and the total explanatory variable of the entire factor was shown to be 80.499%. As a result of cluster analysis using this as an independent variable, three types were derived: Type 1, "a normal body type with an oval cross-sectional shape" (37.6%), with a larger vertical size and an oval chest cross-sectional shape compared to other types; Type 2: a "cylindrical thick body shape" (31.1%), which is the first stage of BMI obesity, with narrow shoulders and a cylindrical shape with a round cross-section; Type 3, "a body shape with broad shoulders and developed chest parts" (31.3%), with a horizontal size similar to Type 2 above the waist, but similar to Type 1 below. The results of this study are expected to be used as a basis for a clothing dimension system and clothing development for tall men reflecting the characteristics of the torso.

• Analytical Science and Technology
• /
• v.11 no.4
• /
• pp.316-320
• /
• 1998

An image analysis was used for the interpretation of microstructures of ferrous metal artifacts. For the purposes, various microstructural features such as average grain size, phase area, shape factor, and composition of the inclusions, were parameterized for the information about manufacturing techniques such as casting, heating and tempering. The carbon content was determined through the evaluation of the amount of pearlite phase. As the amount of pearlite phase increased the shape factor also increased. Grain size was relatively smaller in trans-section than in cross-section. The manufacturing direction was trans-sectional because the orientation of inclusions was elongated lengthwise. All inclusions was of silicate groups and the manufacturing temperature was estimated up to $1450^{\circ}C$.

• Korean Journal of Metals and Materials
• /
• v.48 no.9
• /
• pp.847-855
• /
• 2010

The grain size of a cross-section of $8{\mu}m$-thick copper film was determined by electron backscatter diffraction analysis. Grain size distribution histogram showed the presence of a large fraction of small-sized grains, and the mean grain size was significantly affected by handling of them. A cut-off grain size, below which all grains are ignored as noise and eliminated for the calculation of the mean value, should be three or four times as large as the step size. Due to the presence of small grains, the linear intercept method derived larger mean grain size, which depends less sensitively on the cut-off grain size than the equivalent circle diameter method.

• Steel and Composite Structures
• /
• v.19 no.1
• /
• pp.21-41
• /
• 2015

Push-out tests have been conducted on 18 rectangular concrete-filled steel tubular (CFST) columns with the aim of studying the bond behaviour between the steel tube and the concrete infill. The obtained load-slip response and the distribution of the interface bond stress along the member length and around the cross-section for various load levels, as derived from measured axial strain gradients in the steel tube, are reported. Concrete compressive strength, interface length, cross-sectional dimensions and different interface conditions were varied to assess their effect on the ultimate bond stress. The test results indicate that lubricating the steel-concrete interface always had a significant adverse effect on the interface bond strength. Among the other variables considered, concrete compressive strength and cross-section size were found to have a pronounced effect on the bond strength of non-lubricated specimens for the range of cross-section geometries considered, which is not reflected in the European structural design code for composite structures, EN 1994-1-1 (2004). Finally, based on nonlinear regression of the test data generated in the present study, supplemented by additional data obtained from the literature, an empirical equation has been proposed for predicting the average ultimate bond strength for SHS and RHS filled with normal strength concrete.

• Management & Information Systems Review
• /
• v.22
• /
• pp.1-23
• /
• 2007

This paper investigates the relationships between exports, firm size, and firm dynamics. It is based on a longitudinal data covering listed firms in the Korean manufacturing industry. We found the stylized fact that the probability that a firm is exporter increases with firm size. A regression model for the determinant of export/sales ratio including dynamic adjustment process is tested on a cross-section sample for the year 2001. Empirical findings suggest that there is a positive and inversely U-shaped relationship between firm size and export/sales ratio, just for basic material and capital good industry. Except for firm size, the hypotheses concerning human capital intensity, physical capital intensity, R&D intensity, and patent are rejected. Using Granger causality test, we found that the rate of growth of total sales influences the change of the export/sales ratio with time lag for medium-sized firms. Finally, some policy implications are presented.