• 한국광학회지
• /
• 제4권1호
• /
• pp.90-100
• /
• 1993

단면의 모양이 반달꼴인 이산화규소 광도파로의 모우드특성을 분석할 수 있는 수치계산 프로그램을 구성하고, 이것을 써서 광도파로의 도파특성을 살펴보았다. 수치계산의 기본 원리는 파동함수를 비교적 모양이 간단한 조화함수로 전개함으로써 파동방정식을 행렬방정식으로 바꾸고, 이 행렬을 대각화하여 고유값과 고유벡터를 구하는 것이다. 이 논문에서는 이 원리를 실제 프로그램에 실현시키는 과정과 그때 생기는 문제점들의 해결방법을 설명하였다. 이 프로그램을 써서 단면의 모양이 반달꼴인 이산화규소 광도파로와 그외에 다른 몇몇 전형적인 단면을 갖는 광도파로의 도파모우드의 특성을 분석하였다.

• 콘크리트학회지
• /
• 제2권3호
• /
• pp.65-72
• /
• 1990

섬유 콘크리트 내의 단위 면적당 섬유 개수에 대한 이론식이 공시체의 경계조건의 영향을 고려하여 유도되었다. 또한 단위 면적당의 섬유 개수는 각기 다른 섬유형태, 그리고 다른 용적 혼합율(volume fractions)을 갖는 공시체에 대하여 실험적으로도 산정되었으며 이들 실험치들에 근거한 통계적 해석을 통한 공시체 각 단면에 따른 단위 면적당 강섬유 수의 집중 정도의 차이가 평가 되었다. 또한 vibration에 의한 강섬유의 재향성(reorientation)의 정도는 이론치와 실험치의 차이를 비교함으로서 검토되었다.

• 한국산학기술학회논문지
• /
• 제17권5호
• /
• pp.557-565
• /
• 2016

지구온난화 및 이상기후의 영향으로 극한홍수의 발생확률 및 규모가 증가함에 따라 수공구조물의 붕괴위험도 함께 증가하고 있다. 대표적인 수공구조물인 제방의 붕괴 시 막대한 붕괴유량이 제내지로 유입되어 많은 침수피해를 발생시킨다. 이러한 피해를 예측하기 위해 붕괴유량을 정확히 파악하는 것이 중요하다. 본 연구에서는 제방붕괴단면의 비대칭성에 따른 붕괴유량의 변화를 분석하였다. 수리실험결과를 통해 제방의 붕괴가 진행됨에 따라 붕괴단면의 비대칭성이 어떻게 변화하는지 BASD를 계산하여 분석하였다. 그 결과, 붕괴유량과 BASD의 관계를 도출할 수 있었다. 또한, 3차원 수치모의를 통해 동일한 조건하에서 붕괴단면의 비대칭성에 따른 붕괴유량의 차이를 비교하였다. 이는 기존에 침수면적을 예측하기 위해 사용한 붕괴단면의 직사각형 가정은 붕괴유량이 과다하게 산정됨을 알 수 있었고 붕괴단면의 BASD에 따라 붕괴부에서 간섭현상이 발생하여 붕괴유량이 감소하는 것으로 나타났다. 범람 수치모의 시 제방붕괴 단면의 BASD를 고려하여 보다 정확한 붕괴유량을 산정한다면 정확한 예상침수면적을 도출할 수 있을 것으로 기대된다.

• 자원환경지질
• /
• 제27권6호
• /
• pp.563-569
• /
• 1994

Resistivity Image Profiling has been applied to a geological survey in the Keoje-do area. Survey lines are located near the KD-02 and KD-06 wells in the area, where we have already sampled all rock cores and carried out several kinds of geophysical logs. In each site a resistivity cross-section is obtained by inverting pole-pole apparent resistivities. Comparing the reconstructed resistivity section with the rock cores and logging data obtained in the well provides a detailed picture of subsurface geology. The geology of KD-02 site is composed of conglomerate, sandstone and shale with fractures. The reconstructed resistivity image is useful for assessing the grade of weathering of these rocks. The KD-06 site is mainly underlain by granitic rocks, and its fresh basement can be delineated by resistivities over $1000{\Omega}{\cdot}m$.

• Restorative Dentistry and Endodontics
• /
• 제42권3호
• /
• pp.216-223
• /
• 2017

Objectives: The aim of this study was to compare the mechanical properties of various nickel-titanium (NiTi) files with similar tapers and cross-sectional areas depending on whether they were surface-treated. Materials and Methods: Three NiTi file systems with a similar convex triangular cross-section and the same ISO #25 tip size were selected for this study: G6 (G6), ProTaper Universal (PTU), and Dia-PT (DPT). To test torsional resistance, 5 mm of the straightened file's tip was fixed between polycarbonate blocks (n = 15/group) and continuous clockwise rotation until fracture was conducted using a customized device. To evaluate cyclic fatigue resistance, files were rotated in an artificial curved canal until fracture in a dynamic mode (n = 15/group). The torsional data were analyzed using 1-way analysis of variance and the Tukey post-hoc comparison test, while the cyclic fatigue data were analyzed using the Mann-Whitney U test at a significance level of 95%. Results: PTU showed significantly greater toughness, followed by DPT and G6 (p < 0.05). G6 showed the lowest resistance in ultimate torsional strength, while it showed a higher fracture angle than the other files (p < 0.05). In the cyclic fatigue test, DPT showed a significantly higher number of cycles to failure than PTU or G6 (p < 0.05). Conclusions: Within the limitations of this study, it can be concluded that the torsional resistance of NiTi files was affected by the cross-sectional area, while the cyclic fatigue resistance of NiTi files was influenced by the surface treatment.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 추계학술대회논문집
• /
• pp.26-29
• /
• 1999

Process design for elliptically shaped deep drawing products is various according to size shape and specification of products. This study presents two approaches to design the preform that is a key process for elliptically shaped products, One of these is that cross-section of punch is circular. Another is that for the improvement of characteristics for final products the cross-section of the punch is similar to rectangular shape. After forming the preform process design of top-part drawing is the same. In the study blank shape and dimension are obtained by applying a numerical formula and surface area constancy.

• Transactions on Electrical and Electronic Materials
• /
• 제15권4호
• /
• pp.217-220
• /
• 2014

We studied the plating properties of Sn-Pb solder according to the shape of the Cu wire's cross-section for photovoltaic ribbon. The thickness of the Sn-Pb layer largely decreased to 29% on a curved Cu surface, compared to a flat Cu surface. This phenomenon is caused by the geometrical decrease in the contact angle of the liquid Sn-Pb solder and an increase in the surface energy of the solid/vapor on the curved Cu surface. We suggest a new ribbon's design where the Cu wire's cross-section is a semi-ellipse. These semi-ellipse ribbons can decrease the use of Sn-Pb solder to 64% and increase the photovoltaic efficiency, by reducing the contact area between the ribbon and cell, to 84%. We also see an improvement of reflectivity in the curved surface.

• 한국의류학회지
• /
• 제18권5호
• /
• pp.628-636
• /
• 1994

One vertical (medianus) and six horizontal (chest, bust, below bust, waist, abdomen and hip) sections of nine healthy pregnant women were examined every month by siliding gauge method during the period from 3rd to loth monthes of pregnancy. In the body changes along the passing months of pregnancy, which were observed by a follow·up measurement, there was little change on the posterior line when viewed using a vertical cross section. On the contrary, there was a great deal of increase on the anterior median line. Particularly, the degree of protrusion was great in the waist and ubilicus area due to pregnancy. At early pregnancy the distance from front to back is much shorter than side to side, however, as pregnancy progressed the front to back distance, on a horizontal cross section, is almost equal to the side to side distance.

• 한국전기전자재료학회논문지
• /
• 제25권7호
• /
• pp.496-499
• /
• 2012

Modified structure of copper pillar bump which has trapezoidal cross section on the top region is suggested with simulation results and concept of fabrication process. Due to the large surface area of joint region between bump and solder in suggested structure, electro-migration effect can be reduced. Reduction of electro-migration is related with current density and joule heating in bump and investigated with finite element methods with variation of dimensional parameters. Mechanical characteristics are also investigated with comparing modified copper pillar bump and conventional copper pillar bump.

• 대한기계학회논문집B
• /
• 제33권7호
• /
• pp.512-519
• /
• 2009

Flow pulsation in the gap connecting with two parallel channels is investigated by RANS and URANS approaches. The two parallel channels are connected by a small channel called for a gap. The parallel channels are designed to have different cross section area with its ratio of 0.5. Computations are conducted using a CFX 11.0 code. The bulk Reynolds number is 60,000. Predicted results are compared with the previous experimental data. Mean velocity profile at the center of gap region are compared with experiments for its validation. Spectral analysis on the lateral velocity in the center of the gap was performed. Auto correlation for the axial-flow velocity pattern was presented. The unsteady structure of the flow pulsation was visualized in the region of the gap in the parallel channel.