• Journal of the Korean Society of Radiology
• /
• v.11 no.3
• /
• pp.123-129
• /
• 2017

Compton suppression apparatus using the Compton scattering response, by inhibiting part of the spectrum Compton continuum Compton continuum in the area of the peak analysis of the gamma rays that enables a clearer device. In order to find out the geometry structure of high-purity germanium detector(HPGe) -NaI(TI) and to optimize the effect of movement, Monte Carlo simulation was used to grasp the behavioral characteristics of Compton suppression and compare several layout structures. And applied to the cylinder beaker used for the environmental measurement by using the efficiency according to the distance. For the low-energy source such as 81 keV, the Compton continuum is scarcely developed and the suppression effect is also insignificant because the scattering cross-section of the Compton effect is relatively low. In the spectrum for the remaining energy, it can be seen that the Compton continuum part is suppressed in a certain energy range. Compton suppression effect was not significantly different from positional shift. average reduction factor(ARF) value was about 1.08 for 81 keV and about 1.23 for 1332.4keV energy at the highest value. It can be seen that suppression over the Compton continuum region of the energy spectrum is a more appropriate arrangement. Therefore, it can be applied to various environmental sample measurement through optimized structure.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.29-29
• /
• 2009

On this research, laser welding technology for manufacturing automobile body is studied. Laser welding technology is one of the important technologies used in the manufacturing of lighter, safer automotive bodies at a high level of productivity; the leading automotive manufacturers have replaced spot welding with laser welding in the process of car body assembly. Korean auto manufacturers are developing and applying the laser welding technology using a high output power Nd:YAG laser and a 6-axes industrial robot. On the other hand, the robot-based remote laser welding system was equipped with a long focal laser scanner system in robotic end effect. Laser system, robot system, and scanner system are used for realizing the high speed laser welding system. The remote laser welding system and industrial robotic system are used to consist of robot-based remote laser welding system. The robot-based remote laser welding system is flexible and able to improve laser welding speed compared with traditional welding as spot welding and laser welding. The robot-based remote laser systems used in this study were Trumpf's 4kW Nd:YAG laser (HL4006D) and IPG's 1.6kW Fiber laser (YLR-1600), while the robot systems were of ABB's IRB6400R (payload:120kg) and Hyundai Heavy Industry's HX130-02 (payload:130kg). In addition, a study of quality evaluation and monitoring technology for the remote laser welding was conducted. The welding joints of steel plate and steel plate coated with zinc were butt and lapped joints. The quality testing of the laser welding was conducted by observing the shape of the beads on the plate and the cross-section of the welded parts, analyzing the results of mechanical tension test, and monitoring the plasma intensity and temperature by using UV and IR detectors. Over the past years, Trumf's 4kW Nd:YAG laser and ABB's IRB6400R robot system was used. Nowadays, the new laser source, robot and laser scanner system are used to increase the processing speed and to improve the efficiency of processes. This paper proposes the robot-based remote laser welding system as a means of resolving the limited welding speed and accuracy of conventional laser welding systems.

• Journal of Fashion Business
• /
• v.12 no.2
• /
• pp.87-99
• /
• 2008

This study aims to classify lower trunk body types of Chinese men in their middle age (30s and 40s) and suggest the standard for them to design slacks pattern. Mollison's relation deviations were used to analyze the direct measurement items in this research compared to those of Size Korea 2004. Though Korean middle-aged men were higher in most items than Chinese counterparts, all items except mid-thigh circumference and side hip length were merely within the range of ${\pm}1\sigma$. According to the results of size classification by absolute values, factor analysis extracted to 2 factors(horizontal size of lower body and vertical size of lower body), and cluster analysis brought about 3 types(type1: tall and thin trunk (36.9%), type 2 : normal height and thick trunk(45.5%), and type 3 : short and normal trunk(17.6%) with some significant differences among them. Also, the results of shape classification by index values, they were extracted 4 factors (waist-hip flatness, waist-hip cross section, vertical waist-groin and hip-surface length) by factor analysis and revealed 3 types(type 1: different waist-hip width, thick, long waist, long upper hip, and short hip-surface length(27.8%), type 2 : different waist-hip width, flat, short upper hip, high hip and groin, and average hip-surface length(29.4%), and type 3: small waist-hip width, thick, average upper hip, and short hip-surface length (42.8%)) with significant differences among them by cluster analysis. The results of standard body types by shape-size combination, 19subjects(10.16%) under these values are regarded as standard body types. Significance was not seen in all items in the t-test results between the total group and the standard group. The latter had lower variation coefficients and smaller individual differences than the former. However, in-depth research is required for generalization since this research is limited to a small number of subjects in Ningbo of Zhejiang.

• The Journal of Korean Physical Therapy
• /
• v.16 no.4
• /
• pp.218-225
• /
• 2004

OBJECTIVES: This study was performed to find out static two-point discrimination (TPD) in fingertips. METHODS: This was a cross-section, measure study of static two-point discrimination involving healthy young adults. Measure was completed by 48 college students in Andong Science College from June 1 to 12, 2004. The minimal distance at which two-points could be discriminated was measured from thumb to little finger. RESULTS: For dermatomal regions of the fingertip, mean values ranged from 3.3mm to 4.9mm (thumb 3.6mm, index finger 3.3mm, middle finger 3.8mm, ring finger 4.2mm, and little finger 4.7mm in the left hand; thumb 3.7mm, index 3.5mm, middle 4.0mm, ring 4.3mm, and little 4.9mm in the right hand). A significant difference in discrimination ability was found between men and women, 3.5mm for women showed a greater sensitivity than 4.1mm for men in the left middle fingertip(p=0.0109), also 3.9mm for women showed a greater accuracy than 4.5mm for men in the left ring fingertip(p=0.0388). In the right index fingertip, women (3.1mm) have a narrow distance than men (3.6mm)(p=0.0329). The minimal distance of TPD was found a significant difference between 20 and 30 years in age. 4mm for 30 years showed a greater distance than 3.5mm for 20 years in the left thumb fingertip(p=0.0354), also, 3.8mm for 30 years showed a greater distance than 3.2mm for 20 years in the left index fingertip(p=0.0174), and 4.3mm for 30 years showed a greater distance than 3.7mm for 20 years in the left middle fingertip(p=0.0444). In the right index fingertip, 20 years (3.2mm) had also a narrow distance than 30 years (4.1mm)(p=0.0020), 20 years (3.9mm) showed a narrow distance than 30 years (4.6mm) in the right middle fingertip(p=0.0124), and 20 years (4.1mm) showed a greater sensitivity than 30 years (5.0mm) in the right ring fingertip(p=0.0070). CONCLUSIONS: Our results suggest that distance of TPD in the both index fingertips for 20 years women was significantly narrowed.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.1
• /
• pp.23-31
• /
• 2006

X-ray transit materials with straight path and the its intensity is proportional to the density of materials. Therefore, X-ray has been extensively used as a nondestructive evaluation (NDE) method in various fields. This study was carried out for development of a portable X-ray CT (computed-tomography) system to detect deteriorations of wood members in buildings. Based on the results of our previous study, a procedure of CT image reconstruction was established In order to verify the applicability of developed system, CT images of three wood disks were reconstructed by newly developed procedure and compared with the prototypes. From the results of this study, it was shown that the newly developed system could be used not only to determine the shape, size, and position of defects, but also to find the density distribution in cross section of wood structure members. The density distribution may be utilized to clarify the reason of wood deterioration and to provide the preventive method on how to treat or repair wood buildings. Because it was initial stage of system development, there were some limitations concerned with measuring equipment and image reconstruction algorithm. Especially, measuring time including equipment setup time was longer and measuring accuracy was lower than we expected. Therefore, we planned some additional studies on improvement of equipment and algorithm to enhance the capability of X-ray CT system.

• Korean Journal of Medicinal Crop Science
• /
• v.12 no.1
• /
• pp.67-72
• /
• 2004

For discrimination the origins and the commercial herb medicines of three Angelicae Radixes (Danggui), anatomical characters of leaves, petioles, and root cross-section were investigated and those were compared each other. The key for discrimination of these herb medicines was made by below simple characters: development of periderm, absent and present of collenchyma under the periderm, and distribution of latex tube in cortex. The result of discrimination for the commercial herb medicines based on the discrimination key, Angelicae gjgantis Radix (Angelica Gigas Root), Angelicae Radix (Japanese Angelica Root), and Radix Angelicae Sinensis (Danggui) were correctly identified for Angelica gigas Nakai, A acutiloba Kitagawa, and Angelica sinensis (Oliv.) Diels., respectively. Consequently, anatomical characters could be utilized for useful method to discriminate three Angelicae Radixes (Danggui).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.407-408
• /
• 2011

Natural boron consists of two stable isotopes 10B and 11B with natural abundance of 18.8 atom percent of 10B and 81.2 atom percent of 11B. The thermal neutron absorption cross-section for 10B and 11B are 3837 barn and 0.005 barn respectively. 10B enriched specific compounds are used for control rods and as a reactor coolant additives. In this work 2 methods for boron enrichment were analysed: 1) Gas irradiation in static conditions. Dissociation occurs due to multiphoton absorption by specific isotopes in appropriately tuned laser field. IR shifted laser pulses are usually used in combination with increasing the laser intensity also improves selectivity up to some degree. In order to prevent recombination of dissociated molecules BCl3 is mixed with H2S 2) SILARC method. Advantages of this method: a) Gas cooling is helpful to split and shrink boron isotopes absorption bands. In order to achieve better selectivity BCl3 gas has to be substantially rarefied (~0.01%-5%) in mixture with carrier gas. b) Laser intensity is lower than in the first method. Some preliminary calculations of dissociation and recombination with carrier gas molecules energetics for both methods will be demonstrated Boron separation in SILARC method can be represented as multistage process: 1) Mixture of BCl3 with carrier gas is putted in reservoir 2) Gas overcooling due to expansion through Laval nozzle 3) IR multiphoton absorption by gas irradiated by specifically tuned laser field with subsequent gradual gas condensation in outlet chamber It is planned to develop software which includes these stages. This software will rely on the following available software based on quantum molecular dynamics in external quantized field: 1) WavePacket: Each particle is treated semiclassicaly based on Wigner transform method 2) Turbomole: It is based on local density methods like density of functional methods (DFT) and its improvement- coupled clusters approach (CC) to take into account quantum correlation. These models will be used to extract information concerning kinetic coefficients, and their dependence on applied external field. Information on radiative corrections to equation of state induced by laser field which take into account possible phase transition (or crossover?) can be also revealed. This mixed phase equation of state with quantum corrections will be further used in hydrodynamical simulations. Moreover results of these hydrodynamical simulations can be compared with results of CFD calculations. The first reasonable question to ask before starting the CFD simulations is whether turbulent effects are significant or not, and how to model turbulence? The questions of laser beam parameters and outlet chamber geometry which are most optimal to make all gas volume irradiated is also discussed. Relationship between enrichment factor and stagnation pressure and temperature based on experimental data is also reported.

• Membrane Journal
• /
• v.27 no.2
• /
• pp.199-204
• /
• 2017

In this study, a study was carried out for the separation of metal ions in lignin extract discharged from the pulp process. alumina powders were mixed with DMAc (N, N-dimethylacetamide) solvent and PESf (Polyethersulfone) polymer, PVP (polyvinylpyrrolidone) dispersant was added and slip casting method was used to prepare the membrane. The membrane was measured for pore size through a CFP (Capillary Flow Porometer) device and the surface and cross-section of the membrane were observed through a FE-SEM (Field Emission Scanning Electron Microscope). The flux was calculated by measuring the filtered weight per hour using a separation experiment device. Pore size measurements were performed under increasing pressure from 0 psi to 30 psi. The pore size of the membrane was $0.4{\mu}m$ and the flux decreased from the initial flux value of $6.36kg{\cdot}m^{-2}{\cdot}h^{-1}$ to $1.98kg{\cdot}m^{-2}{\cdot}h^{-1}$ due to the fouling of the membrane. After the permeation experiment, membrane contaminants were removed by simple washing. Separation experiments showed that Na contained in the initial lignin extract was reduced by 69%, Fe was removed by 87%, K by 95%, Ca by 93% and Mg by 96%.

• Korean Journal of Materials Research
• /
• v.4 no.3
• /
• pp.287-294
• /
• 1994

PAN-based carbon fiber roving and fabric were heat treated at the temperature of $2170^{\circ}C$. Using non-heat treated and heat treated fabric, greenbodies of CFRP and GFRP were manufactured in the Autoclave. After the analysis of heat treated and non-heat treated carbon fiber roving and two types of greenbodies, the variations of physical and mechanical properties of carbon fibers and greenbodies with heat treatment were studied. Observing the cross-section of carbon fiber with SEM, we knew the diameter of carbon fiber was decreased from 6.8gm to 6.4p1. The results of TGA showed that the oxidation resistence was enhanced after heat treatment. The tensile strength of carbon fiber was decreased from (3.11$\pm 0.32)\times 10^3$ MPa to (1.87$\pm 0.26)\times 10^3$MPa, but tensile modulus was increased from (1.94$\pm 0.06)\times 10^5$ MPa to (2.02$\pm 0.11)\times 10^5$MPa after heat treatment. The interlaminar shear strengths of CFRP and GFRP were 148.8$\pm$1.6Mpa and 82.2$\pm$1.1Mpa, respectively. Torch test showed that CFRP was abraded smoothly but GFRP was delaminated.

• The Korean Journal of Mycology
• /
• v.18 no.1
• /
• pp.42-49
• /
• 1990

The cultural characteristics and some factors such as nutrient sources and supplements effecting on mycelial growth and density were investigated to study the possibility of an artificial cultivation of P. cocos. The optimum pH for P. cocos was 4.0-4.5. The optimal growth temperature ranged from $25^{\circ}C$ to $29^{\circ}C$. Myceial growth of P. cocos was better in SPD than PD media. Adding the nurient sources such as dextrose, yeast and potato infusion to pine extract media practically stimulated the mycelial growth and density of P. cocos comparing to pine extract media alone. When P. cocos was cultured on sawdust media added 3 different supplements composed of corn meal, rice bran and wheat bran, corn meal was the best and its percentage was 30 (w/w) for mycelial growth. On culturing in sawdust media added by varying the mixture ratio of them, the media mixed corn meal and wheat bran (3:1, w/w) supported more vigours for mycelial growth. In inoculation test to pine stem, the fungal growth was good in under or inside pine bark and xylem, but the sclerotium was not observed in the stem. Mycelial growth was also observed in central part of pine stem by cross section.