• Wind and Structures
• /
• v.36 no.4
• /
• pp.221-236
• /
• 2023

The lateral component of turbulence and the vortices shed in the wake of a structure result in introducing dynamic wind load in the acrosswind direction and the resulting level of motion is typically larger than the corresponding alongwind motion for a dynamically sensitive structure. The underlying source mechanisms of the acrosswind load may be classified into motion-induced, buffeting, and Strouhal components. This study proposes a frequency domain framework to decompose the overall load into these components based on output-only measurements from wind tunnel experiments or full-scale measurements. First, the total acrosswind load is identified based on measured acceleration response by solving the inverse problem using the Kalman filter technique. The decomposition of the combined load is then performed by modeling each load component in terms of a Bayesian filtering scheme. More specifically, the decomposition and the estimation of the model parameters are accomplished using the unscented Kalman filter in the frequency domain. An aeroelastic wind tunnel experiment involving a tall circular cylinder was carried out for the validation of the proposed framework. The contribution of each load component to the acrosswind response is assessed by re-analyzing the system with the decomposed components. Through comparison of the measured and the re-analyzed response, it is demonstrated that the proposed framework effectively decomposes the total acrosswind load into components and sheds light on the overall underlying mechanism of the acrosswind load and attendant structural response. The delineation of these load components and their subsequent modeling and control may become increasingly important as tall slender buildings of the prismatic cross-section that are highly sensitive to the acrosswind load effects are increasingly being built in major metropolises.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.2
• /
• pp.75-83
• /
• 2023

In this paper, we present the analysis results on the vibration serviceability of a pedestrian bridge considering the effect of pedestrian moving mass inertia. Using dynamic finite element analysis, we considered different walking scenarios, including pedestrian density, walking speed, random walking, and synchronized walking, to analyze the acceleration response of a 40m long single-span bridge with a steel composite box cross section. We showed that the equivalent fixed mass analysis method did not significantly differ from the moving mass analysis in the random walk scenario and a wider frequency excitation band may be useful to consider when evaluating vibration serviceability in a random walk scenario.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.6
• /
• pp.21-27
• /
• 2022

C_f/SiC composites have low density, high mechanical strength, and good thermal stability, making them promising materials for high-temperature applications such as rocket propulsion and military fields. However, the remaining Si deteriorates physical and thermal properties. In this paper, the de-siliconization was introduced as a method to remove the Si of the C_f/SiC composite fabricated through Liquid Silicon Infiltration(LSI) process. The stability of composite has been tested under an oxyacetylene torch flame for up to 5 minutes. The oxidized surface and cross section of specimens were characterized by 3D scanning, X-ray diffraction(XRD), Optical microscope(OM) and Scanning electron microscope(SEM).

• Composites Research
• /
• v.22 no.3
• /
• pp.1-8
• /
• 2009

In this paper, we present the results of experimental and analytical investigations on the structural behavior of GFRP pipes used in the water supply pipeline system. Cross-section of the pipe is consisted with two GFRP tubes and polymer mortar between the tubes. Due to the advantages such as light-weight, corrosion resistance, smooth surface, flexibility, etc., use of GFRP pipe in the water supply pipeline system is ever increasing trend. Therefore, more optimized structural design methodology should be developed. In the investigation, we conducted theoretical and analytical studies on the load versus radial deformation characteristics of GFRP pipes. In addition, ring stiffness test is also performed. Test results are compared with theoretical and analytical results and it was found that the results are agreed well within 5% of radial deformation. Finally, it was also found that the GFRP pipes used in the water supply pipeline system are strong enough to satisfy the industrial requirements.

• Conservation Science in Museum
• /
• v.29
• /
• pp.65-80
• /
• 2023

This study investigated seven specimens of lead-glazed paving bricks in order to identify the materialistic characteristics of the lead glaze used for paving bricks during the late Unified Silla period in Korea. The samples were excavated from the Beopgwangsa Temple site, Pohang. As a result of observing the surface and cross-section of the glaze with a microscope, the study confirmed that the lead glaze demonstrates various traits of hydration, which were classified into four layers: Surface layer, hydration layer A, hydration layer B, and green layer. After measuring the composition of each layer with SEM-EDS analysis, the green layer was found to have been less affected by the external environment, which renders it highly reasonable to view the green layer as the original composition of the lead glaze. The green layer is a low-temperature glaze composed mainly of PbO and SiO₂ at a ratio of 8:2, with approximately 2% CuO acting as the main colorant. Comparing the green layer composition with those from Gyeongsang-do, it was confirmed that the mixture ratio of lead glaze materials was similar to other sites such as the Sacheonwangsa Temple site, the Cheonryongsa Temple site, and the Buseoksa Temple site.

• Conservation Science in Museum
• /
• v.29
• /
• pp.111-132
• /
• 2023

Terahertz radiation cannot pass through metal and therefore reflect and return most signals. Utilizing this property, this study analyzed information on paintings to verify the usage of metal materials on paintings and the scope of their application. First, the study tested specimens of metal-based pigments and synthetic pearl pigments with metallic colors and textures in order to compare basic characteristics of terahertz images, such as signal severance caused by metallic substances, traits reflected in cross-section images, and high degree of reflection. Subsequently, based on the collected information, the study diagnosed various types of paintings including Korean traditional paintings and oil paintings using the terahertz imaging technique to confirm the usage of metal-based pigments in the inner layers of paintings and their scope of application. The terahertz imaging technique could has the potential to provide scientific evidence for previously-undiscovered information and art-historical records about various types of paintings that used metalbased pigments, thereby rendering significant utility for the conservation and authentication of paintings.

• Design Convergence Study
• /
• v.17 no.3
• /
• pp.55-70
• /
• 2018

This study was conducted as a part of long-term project on the development of a set of design guidelines for a crutch as mobility aids for the handicapped in the lower extremity and the suggestion a practical solution for a crutch design. The purpose of this study is to develop a design of a crutch and a set of prototypes that reflects the characteristics of crutch-gait and has a realistic possibility for mass production-based industry. TOGO, a axillary crutch as the result of this study, shows a number of characteristics distinguished from ordinary crutches. These are (1)Minimize the shock associated with planting of the crutch tips by improving the form and structure of crutch tip and axillary pad, (2)Ergonomically designed crutch in accordance with users' body movement while walking on crutches, (3)Easy length control to maximize mobility and maneuverability by changing the cross section of the crutch revolutionary, (4)Minimize possibilities of safety hazards, and (5)Attractive shape of the crutch to keep user self-esteem. The revolutionary crutch derived from this study results has been patented, and the company is seeking to mass-produce and find ways to commercialize it after reviewing the potential problems that may arise in the mass production environment.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.5 no.2
• /
• pp.207-214
• /
• 2015

Stress concentrations around discontinuities, such as a hole or a sudden change in cross section of a structural member, have great important cause in the most materials failure because the stress near the points of application of concentrated loads can reach values much larger than the average value of the stress in the member. This paper presents the stress concentrations between fillet and hole at different locations in a stepped plate under tensile loading. The analysis for interaction effect of stress concentration was performed by photoelasticity and ANSYS which is a commercial finite element software. From the analysis results, the circular hole located at the different position from the fillet radius can cause different values of stress concentration factor within interacting region.

• Geomechanics and Engineering
• /
• v.34 no.1
• /
• pp.103-113
• /
• 2023

This study focused on understanding the relationship between the design of a tunnel boring machine disc cutter ring and its rock-breaking efficiency, as well as the applicable conditions of different cutter ring types. The discrete element method was used to establish a numerical model of the rock-breaking process using disc cutters with different ring types to reveal the development of rock damage cracks and variation in cutter penetration load. The calculation results indicate that a sharp-edged (V-shaped) disc cutter penetrates a rock mass to a given depth with the lowest load, resulting in more intermediate cracks and few lateral cracks, which leads to difficulty in crack combination. Furthermore, the poor wear resistance of a conventional V-shaped cutter can lead to an exponential increase in the penetration load after cutter ring wear. In contrast, constant-cross-section (CCS) disc cutters have the highest quantity of crack extensions after penetrating rock, but also require the highest penetration loads. An arch-edged (U-shaped) disc cutter is more moderate than the aforementioned types with sufficient intermediate and lateral crack propagation after cutting into rock under a suitable penetration load. Additionally, we found that the cutter ring wedge angle and edge width heavily influence cutter rock-breaking efficiency and that a disc cutter with a 16 to 22 mm edge width and 20° to 30° wedge angle exhibits high performance. Compared to V-shaped and U-shaped cutters, the CCS cutter is more suitable for soft or medium-strength rocks, where the penetration load is relatively small. Additionally, two typical case studies were selected to verify that replacing a CCS cutter with a U-shaped or optimized V-shaped disc cutter can increase cutting efficiency when encountering hard rocks.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.3
• /
• pp.246-251
• /
• 2023

RADAR(Radio Detection and Ranging) is an important system for surveillance and reconnaissance by detecting a reflected signal which obtains the range from the radar to the target, and the velocity of the target. The magnitude of the reflected signal varies due to the radar cross section of the target, characteristic of the transmission and reception antenna, distance between the radar and the target, and power and wavelength of the transmitted signal. Thus, the RCS is the important characteristic of the target to determine if the target can be observed by the RADAR system. It is based on the material and shape of the target. We have measured the reflection signal of a simple square-shaped (20 × 20 cm) target made of a new material, a gallium-based liquid metal alloy and compared that of well-known metals including copper, aluminum. The magnitude of reflected signal of the aluminum target was the largest and it was 2.4 times larger than that of the liquid metal target. We also investigated the effect of the shape by measuring reflectance of the F-22 3D model(~1/95 ratio) target covered with/without copper, aluminium, and liquid metal. The largest magnitude of the reflected signal measured from side-view with the copper-covered F-22 model was 2.6 times greater than that of liquid metal. The reflectance study of the liquid metal would be helpful for liquid metal-based frequency selective surface or metamaterials.