• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.485-490
• /
• 2000

The effect of curvature, rotation, variable cross-section can make very complex flow pattern in turbo-machinery such as Pumps, compressors, turbines, In this study of turbulent flow characteristics rotating $90^{\circ}$ curved duct under a Plane rate of strain condition is computationally analyzed. The objective of this study is to understand the complex turbulent flow phenomena in turbo-machinery passage by analyzing the modeled rotating $90^{\circ}$ curved duct flow. RSM(Reynolds Stress Model) was employed for the turbulence modeling of Reynolds stress in momentum equations proposed by Shin(1995). The three dimensional computational code which adopts RSM for trubulence modeling was newly developed for the generalized curvilinear coordinate.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 가을 학술발표회 논문집
• /
• pp.327-334
• /
• 2001

This paper presents a non-linear analysis procedure for plane frame structures by finite element formulation with assumptions of Timoshenko beam theory. Finite element displacement method based on Lagrangian formulation is used and two-noded and isoparametric line element is adopted to represent finite element model. The layered approach is used for the elasto-plastic analysis of the plane frame structures with rectangular and I cross sections. A load incremental method combined with the tangent stiffness and the initial stiffness methods for each load increment is used for the solution of non-linear equations. Numerical examples are presented to investigate the behavior and the accuracy of the elasto-plastic non-linear application and the results of this study are compared with other solutions using the concept of plastic hinge.

• 한국전자파학회논문지
• /
• 제16권7호
• /
• pp.768-775
• /
• 2005

본 논문에서는 십자형 구조를 갖는 광대역 모노폴 안테나를 제시하고 모노폴 소자의 폭과 높이에 따른 복사 특성을 고찰하였다 제시된 모노폴 안테나는 십자형 구조의 복사 소자와 접지판과 소자 사이에 삽입한 임피던스 정합부에 의해 광대역 특성이 실현되었다. 제시된 안테나의 광대역 특성을 확인하기 위하여 주파수 $1.75\~2.655$ GHz에서 안테나를 설계$\cdot$제작하고 복사 특성을 측정하였다. 제시된 안테나는 수평면내 무지향성, 수직면내 지향성 특성을 가지며, VSWR은 사용 주파수 전대역에서 1.5 이하, 안테나 이득은 $2.5\~3.78$ dBi로 나타났다. 측정 결과로부터 제시된 안테나는 PCS, WCDMA, Wibro, 위성 DMB 밴드의 공용 실내 안테나로 사용될 수 있는 광대역 특성을 갖는 안테나로 확인되었다.

• Nuclear Engineering and Technology
• /
• 제22권2호
• /
• pp.108-115
• /
• 1990

0.5~l.2-MeV 양성자빔에 대한 X-선 발생단면적의 측정을 Cu와 Au에 대해 수행하였다. 이 실험에서는 SNU 1.5-MV 탄뎀 반데그라프 가속기에서 얻은 양성자빔을 표적에 입사시켰다. 여기서 방출된 X-선과 후방산란된 양성자는 Si(Li) X-선 검출기와 SSB(Silicone Surface Barrier) 하전입자 검출기를 이용해 동시 측정하였다. 그리하여 측정된 X-선 발생단면적은 다른 실험치들 및 PWBA(Plane Wave Born Approximation)와 ECPSSR(Perturbed Stationary State corrected Energy loss, Coulomb deflection, Relativistic effects)인 이론치들과 비교하였다. 1.0-MeV근처의 양성자에너지에 대해 측정치는 PWBA 값보다는 ECPSSR(D.D. Cohen et al., 1985) 값에 더 잘 일치함을 보였다. 특히, Au의 측정치는 1.2-MeV 양성자빔에 대해 9.69$\pm$0.39 bams이었고, ECPSSR 이론치와는 5% 이내로 일치했으며, 0.5~l.2-MeV 양성자에 대한 실험치는 대부분의 다른 실험치들과 30% 이내로 일치했다.

• 한국공간구조학회논문집
• /
• 제1권1호
• /
• pp.143-155
• /
• 2001

Generally, truss design has been determined by the designer's experience and intuition. But if we perform the most economical structural design we must consider not only cross-sections of members but also configurations(howe, warren and pratt types etc.) of single truss as the number of panel and truss height. The purpose of this study is to develope automated optimum design techniques for steel truss structures considering cross-sections of members and shape of trusses simultaneously. As the results, it could be possible to find easily the optimum solutions subject to design conditions at the preliminary structural design stage of the steel truss structures. In this study, the objective function is expressed as the whole member weight of trusses, and the applied constraints are as stresses, slenderness ratio, local buckling, deflection, member cross-sectional dimensions and truss height etc. The automated optimum design algorithm of this study is divided into three-level procedures. The first level on member cross-sectional optimization is performed by the sequential unconstrained minimization technique(SUMT) using dynamic programming method. And the second level about truss height optimization is applied for obtaining the optimum truss height by three-equal interval search method. The last level of optimization is applied for obtaining the optimum panel number of truss by integer programming method. The algorithm of multi-level optimization programming technique proposed in this study is more helpful for the economical design of plane trusses as well as space trusses.

• 한국전자파학회논문지
• /
• 제23권12호
• /
• pp.1399-1405
• /
• 2012

무한 도체 평면에 H-형태와 C-형태의 소형 개구가 놓여져 있는 경우에 평면파가 입사될 때 투과 효율의 척도인 투과 단면적의 특성을 분석하였다. 동일한 개구 면적에서 C-형태 개구가 H-형태 개구보다 더욱 큰 투과 단면적이 나타남을 알 수 있었다. 두 개의 C-형태 개구가 인접해 놓여 있을 때 투과 단면적의 특성 관점에서 상호 결합 효과를 연구하는데 보다 관심을 두었고, 투과 단면적이 더욱 증대된다는 관점을 두고 두 개의 C-형태 개구가 x축으로 놓여있는 평행 배열 구조와 C-형태 개구가 y축으로 놓여있는 동일선상 배열 구조를 조사하였다.

• Applied Microscopy
• /
• 제47권2호
• /
• pp.77-83
• /
• 2017

Drastic development of ubiquitous devices requires more advanced batteries with high specific capacitance and high rate capability. Large-area microstructure characterization across the stacks of cathode, electrolyte and anode might reveal the origin of the instability or degradation of batteries upon cycling charge. In this study, sample preparation methods to observe the cross-section view of the electrodes for battery in SEM and several imaging tips are reviewed. For an accurate evaluation of the microstructure, ion milling which flats the surface uniformly is recommended. Pros and cons of cross-section polishing (CP) with Ar ion and focused ion beam (FIB) with Ga ion were compared. Additionally, a modified but new cross-section milling technique utilizing precision ion polishing system (PIPS) which can be an alternative method of CP is developed. This simple approach will make the researchers have more chances to prepare decent large-area cross-section electrode for batteries.

• 한국의학물리학회지:의학물리
• /
• 제20권2호
• /
• pp.97-105
• /
• 2009

물 흡수선량표준을 기반으로 하는 선량측정 프로토콜에서는 전자선의 선질결정 지표는 $R_{50}$이며, 선량측정의 정확성을 향상시키기 위하여 전자선의 기준 에너지가 $R_{50}$>7 $g/cm^2$ (E${\gtrsim}$16 MeV)인 고에너지 전자선에서 표준기관에 소급성이 있는 원통형이온함의 물흡수선량교정계수을 이용한 평행평판형이온함의 교차교정을 권고하고 있다. 그러나 이러한 조건을 만족하는 고에너지 전자선은 모든 치료기관에서 보유하기가 어려운 실정이다. 따라서 본 연구에서는 평행평판형이온함의 교차교정 시 16 MeV 이상의 고 에너지 전자선뿐 아니라 12 MeV 이하의 전자선 에너지에서 얻은 평행평판형이온함의 교정계수를 이용하여 선량차이를 각각 비교하였다. 전자선 선량측정은 PTW 30013, Wellhofer FC65G의 Farmer형 원통형이온함과 PTW 34001, Wellhofer PPC40의 Roos형 평행평판형이온함을 이용하였으며 물팬텀내 기준깊이 $Z_{ret}=0.6R_{50}-0.1$(cm)에 원통형이온함과 평행평판형이온함을 같은 위치에 놓고 교차교정을 실시하였다. 교차교정 선질 20 MeV에서 결정된 교정계수를 적용한 물 흡수선량과 전자선에너지 12, 16 MeV에서의 물 흡수선량 차이는 0.2% 이내로 비교적 잘 일치하는 연구결과를 보였다. 그러므로 교차교정 선질 차이에 의한 흡수선량 값 상호 비교한 결과는 측정 불확도내에서 잘 일치하고 있어 각 기관에서 보유하고 있는 의료용가속기의 최고 전자선 선질에서의 교차교정도 유효하다고 사료된다.

• 한국의상디자인학회지
• /
• 제14권1호
• /
• pp.111-121
• /
• 2012

This study focused on the plane and side drape coefficients of weft knitted fabrics as a function of knit structure, stitch density, and stiffness. Fifteen weft knitted fabrics are produced with five different structures (interlock, single pique, royal interlock, cross miss interlock, and mock royal interlock) and three different gauges (7G, 10G, and 12G). Five knit structures were the application of knit, tuck, and miss stitch on the basis of interlock of the double knit fabric For this purpose, three-dimensional shapes of the draped sample were obtained by using a drapability tester which can record the contour line coordinates of a projected plane drape. Then, projected shapes of the plane and side drape were derived from those three-dimensional ones to review the relationship between plane drape coefficients and side ones. It was found that the theoretical values of plane and side drape coefficients depending on the change of deflection angles fit to their experimental ones. A5 a result of a regression analysis of the relationship between plane and side drape coefficients, the relationship could be expressed as $y=0.5838x-0.0065x^2+9.03{\times}10^{-5}x^3$. In case of mean of drape coefficient, it was increased according to the rule of that the more tuck and miss stitch overlap. A high degree of correlation was found between stiffness and drape coefficient. The regression equation of drape coefficient($y$) can be represented by $y=y=\sqrt[3]{Stiffness}-10.72$.

• 한국소음진동공학회논문집
• /
• 제16권1호
• /
• pp.57-65
• /
• 2006

In this paper, we present the principle of virtual work, from which the exact non-linear equations of motion of a rotating ring can be derived, by using the theory of finite deformation. For a thin ring of which the effect of variation in curvature across the cross-section is neglected, the radial displacement and the extensional stress are determined from the principle of virtual work at the steady state where the ring is rotating with a constant angular velocity. And also we formulate systematically the governing equations concerned to the in-plane vibrations and the out-of-plane vibrations at the disturbed state by using the principle of virtual work which is expressed with the disturbed displacements about the steady state. The formulated governing equations are classified by four models along the cases of considering or neglecting all or partly the secondary effects of flexural shear, rotary inertia, circumferential extension, and twist inertia. The natural vibrations of thin rings are analyzed, and its results are compared and discussed.