• Journal of ILASS-Korea
• /
• v.14 no.2
• /
• pp.59-64
• /
• 2009

These experiments are close examination of spray characteristics that are continuous liquid jet and modulated liquid jet. The experiments were conducted using water, over a range of crossflow velocities from $42{\sim}l36\;m/s$, with modulation frequencies of $35.7{\sim}166.2\;Hz$. Between continuous crossflow jet and modulated cross-flow jet of penetration, breakup point, spray angle and macro spray shape are experimentally investigated with image analysis. In cross-flow field, main parameter of liquid jet for breakup was cross-flow stream rather than modulation effect. As oscillation of the periodic pressure that could make liquid jet moved up and down, the mixing efficiency was increased. Also, a bulk of liquid jet puff was detected at upper field of liquid surface. So, this phenomenon has a good advantage of mixing spray from concentration of center area to outer area. Because of modulation frequency, SMD inclination of the structured layer was evanescent. Cross-sectional characteristics of SMD at downstream area were non-structured distributions. Then cross-sectional characteristics of SMD size were about same tendency over a range that is effect of spray mixing. The tendency of volume flux value for various modulation frequency was same distribution. And volume flux was decreased when the modulation frequency increase.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1A
• /
• pp.125-133
• /
• 2008

According to longer and longer span, dynamic instability of stay cable should be prevented. Dynamic instability occurs mainly symmetric 1st mode and antisymmetric 1st mode in stay cable. Especially symmetric 1st mode has a lot of influence on sag. Therefore fundamental frequency of stay cable is different from that of taut sting. Irvine, Triantafyllou, Ahn etc. analyzed dynamic behavior of taut cable with sag through analytical technical and their researches give important results for large bounds of Irvine parameter. But each research shows mutually different values out of characteristic (cross-over or mode-coupled) point and each solution of frequency equations of all researchers can be very difficultly found because of their very high non-linearity. Presented study focuses on fundamental frequency of stay cable. Generalized mechanical energy with symmetric 1st mode vibration shape satisfied boundary conditions is evolved by Rayleigh-Ritz method. It is possible to give linear analytic solution within characteristic point. Error by this approach shows only below 3% at characteristic point against existing researches. And taut cable don't exceed characteristic point. I.e. high accuracy, easy solving techniques, and a little bit limitations. Therefore presented study can be announced that it is good study ergonomically.

• Journal of The Korean Astronomical Society
• /
• v.37 no.5
• /
• pp.543-546
• /
• 2004

The inverse Compton scattering of the cosmic microwave background (CMB) radiation with electrons in the intracluster medium which has a temperature gradient, was examined by the third-order perturbation theory of the Compton scattering. A new type of the spectrum distortion of the CMB was found and named as gradient T Sunyaev-Zel'dovich effect (gradT SZE). The spectrum has an universal shape. There is a zero distortion point, the cross over frequency, at 326GHz. When the hotter region locates closer to an observer, the intensity becomes brighter than the CMB in the frequency region lower than the cross over frequency and fainter than the CMB in the frequency region higher than the cross over frequency. When the cooler region locates closer to an observer, the distorted part of the spectrum has an opposite sign to the above case. The amplitude of the spectrum distortion does not de-pend on the electron density and depends on the heat conductivity and the total temperature variation along a line of sight. Therefore, the gradT SZE provides an unique opportunity to measure thermally nonequilibrium electron momentum distribution function in the ICM and combined with the X-ray measurements of the electron temperature distribution provides an opportunity of direct measurement of the heat conductivity in the ICM.

• Journal of Child Welfare and Development
• /
• v.16 no.2
• /
• pp.109-135
• /
• 2018

The purpose of this study was to analyze the longitudinal causal relationship between caregiver relations and peer relations of children in out-of-home care. We analyzed the three years(2011-2013) of longitudinal data from the Panel Study on Korean Children in Out-of-Home Care. The autoregressive cross-lagged model (ARCL) was used to measure the longitudinal causal relationship between caregiver relations and peer relations. As a result, first, caregiver relations and peer relations showed stability over time. In other words, the results of the measurement at three time points showed that the caregiver relations and peer relations at the previous time had a significant effect on the caregiver relations and peer relations at the later time point. Second, the previous caregiver relations had a significant effect on the subsequent peer relations over time. Third, the previous peer relations had a significant effect on the subsequent caregiver relations over time. This study confirmed the interrelationships of caregiver relations and peer relations of children in care by examining the longitudinal data using the longitudinal analysis method.

• Economic and Environmental Geology
• /
• v.43 no.4
• /
• pp.343-348
• /
• 2010

Gravity anomalies observed in shipborne survey are usually distorted by bad weather conditions and unexpected vessel movement. These distorted data should be removed because they may mislead the data interpretation. However, it is not possible to perfectly remove all erroneous data. Cross-over point correction, which is generally used, only reduces the errors at cross-over points, and thus the data still contain error values. To resolve this drawback, Rauch-Tung-Striebel(RTS) filter was adopted to minimize all errors in the data and at cross-over points. After applying this method, the range of anomaly variation is reduced from 15 mGal to less than 2 mGal, and errors at the cross-over points are minimized from 4.21 mGal to 2.95 mGal. The results imply that RTS filter is very useful to reduce errors in the data and corss-over points.

• Journal of Korean Academy of Nursing
• /
• v.49 no.1
• /
• pp.69-79
• /
• 2019

Purpose: This study aimed to identify the directionality of the causal relationship and interaction between depression and amount of smoking over time in hardcore smokers using longitudinal descriptive analysis. Methods: Secondary data from the Korean Welfare Panel Study were analyzed using autoregressive cross-lagged modeling. Participants included 342 hardcore smokers who participated in the 8th to 11th waves of the panel study. Results: Analyses revealed that change(s) in depression levels according to time had a significant positive relationship with the total amount of smoking per day (${\beta}=.29$, ${\beta}=.19$, ${\beta}=.17$, p<.001), while change(s) in total amount of smoking per day according to time had a significant positive relationship with depression (${\beta}=.43$, ${\beta}=.50$, ${\beta}=.38$, p<.001). Analysis of the cross-lagged effect between depression and total amount of smoking per day showed that depression at one time point had a significantly positive relationship with the total amount of smoking per day at the next time point (${\beta}=.14$, ${\beta}=.13$, ${\beta}=.13$, p=.021), and that the total amount of smoking per day at one time point had a significant positive relationship with depression at the next time point (${\beta}=.04$, ${\beta}=.04$, ${\beta}=.03$, p=.044). Conclusion: The findings in the present study confirmed a cross-interaction between depression and total amount of smoking per day in hardcore smokers. The present findings could be used to develop appropriate smoking-related interventions.

• Cross-Cultural Studies
• /
• v.19
• /
• pp.149-179
• /
• 2010

This article is concerned about the symbolic meaning of the transvestism Renaissance perspective through analysis of Triumph Over Persecution work and The Merchant of Venice, and Jealous Ioan Tornese. The transvestism is frequently present in the comedies of the golden age. A woman author Maria de Zayas has a special interest in female identity with critical and defying view. Also the subject of the transvestism in Spanish literature originated in Italian tradition. In Italian literature, there were two types of disguised women, who urge for love and warrior-heroine(amazon). Both types are also listed in Spanish literature. The dress-crossing heroine of Triumph Over Persecution displays a type of heroine, who corrects a male prejudice and reset a harmonious order. Shakespeare is also one of the Renaissance writers under the influence of the Italian Renaissance novel. Heroine of Merchant of Venice symbolizes a triumphant challenge against the blocks of the patriarchal system. In spite of the social system blocks, cross-dressing women may receive in the patriarchal scenes without problems. Based on the notion of paradox and irony, the Italian novel reflects popular psychology of the time when the link between the internal identity and social outside puts into question. The cross-dressing Torneses' wife, symbolizes the mockery or renaissance deception. Their deception emphasis on an ironic way in the point view of inhuman man who consider women material belongs to the man without any free-will. The costume of the characters make it possible to change their original identity into the other. From this point of view, we can say that the transvestism in these works could be interpreted in two ways: first, the destruction of the traditional categories of women's identity and second, the burlesque contempt on the patriarchal renaissance society.

• Communications for Statistical Applications and Methods
• /
• v.30 no.4
• /
• pp.369-388
• /
• 2023

In this paper, we develop the two-step procedure that detects and estimates the position of structural changes for multivariate nonstationary time series, either on mean parameters or second-order structures. We first investigate the presence of mean structural change by monitoring data through the aggregated cumulative sum (CUSUM) type statistic, a sequential procedure identifying the likely position of the change point on its trend. If no mean change point is detected, the proposed method proceeds to scan the second-order structural change by modeling the multivariate nonstationary time series with a multivariate locally stationary Wavelet process, allowing the time-localized auto-correlation and cross-dependence. Under this framework, the estimated dynamic spectral matrices derived from the local wavelet periodogram capture the time-evolving scale-specific auto- and cross-dependence features of data. We then monitor the change point from the lower-dimensional approximated space of the spectral matrices over time by applying the dynamic principal component analysis. Different from existing methods requiring prior information on the type of changes between mean and covariance structures as an input for the implementation, the proposed algorithm provides the output indicating the type of change and the estimated location of its occurrence. The performance of the proposed method is demonstrated in simulations and the analysis of two real finance datasets.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.170-176
• /
• 2008

The concept design of Flexible Seal for thrust vector control of solid motor was performed. Through the concept design, the optimum pivot point of flexible seal, cross-section configuration of flexible seal and thermal protection system from combustion gas was decided. The pivot point of flexible seal has aft pivot type and cross-section view is conical type. For satisfying a spring torque rate, the shear modulus of rubber has the value of under about 0.6MPa and failure shear stress has over about 2.5MPa.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.724-730
• /
• 2011

A turnout serves to switch train from one line to another. The turnout consists of a Point which is switchs the rail to induce direction, and a Crossing which is cross over two line on the plane surface, and a Lead where is middle section in Point to Crossing. Point machine, consists of a turnout, is important facilities in railway signal, that is safety issue relates in derailment of the train. Recently, train delay and accident frequently occurred because of the turnout include in a point machine trouble of electrical and mechanical. So in order to prevent train accident the research is advanced, install of normal and reverse indication lamp in a point machine, development of adherence detector for sensing the status of adhesion between the stock rails and tongue rails etc. In this paper investigates the problem which is connected with a turnout trouble, include in a point machine, occurrence at the time of train accident, and then proposed to the safety system model in order to prevent the train accident in turnout.