• 한국응용과학기술학회지
• /
• 제38권3호
• /
• pp.903-913
• /
• 2021

본 연구에서는 싸이크론 헥산에서 PVC와 트리에틸디아민 (TEDA), 1,4-디메틸피페라진(DMP) 및 1,4-비스(이미다졸-1-일메틸)벤젠을 각각 치환반응시켜서3가지 형태의 PVC 멤브레인, AEM-1, AEM-2, and AEM-3를 제조하였다. AEM-1, AEM-2, and AEM-3멤브레인의 성공적인 제조 여부를 이온전도도(S/cm), 물함수율 (%), 접촉각, 이온교환능력 (m_eq/g), 열분석, SEM 및 XPS 분석 통하여 확인하였다. 또한, 제조된 가교 음이온 PVC멤브레인을 사용하여 유기전해질에서 전기화학 캐퍼시터 실험을 수행한 결과, 제조된 AEM-1, AEM-2 AEM-3 멤브레인의 경우 유기전해질에서 충/방전실험결과 매우 안정적임을 확인 할 수 있었다. 이러한 결과로 치환반응 후에 용매 캐시팅법으로 제조된 PVC기반 멤브레인 (AEM-1, AEM-2, 및 AEM-3)의 경우 유기전기화학캐퍼시터 (슈퍼캐퍼시터)용 분리막으로 사용될 수 있다.

• Journal of Periodontal and Implant Science
• /
• 제50권4호
• /
• pp.238-250
• /
• 2020

Purpose: This study aimed to evaluate the biocompatibility and the mechanical properties of ultraviolet (UV) cross-linked and biphasic calcium phosphate (BCP)-added collagen membranes and to compare the clinical results of ridge preservation to those obtained using chemically cross-linked collagen membranes. Methods: The study comprised an in vitro test and a clinical trial for membrane evaluation. BCP-added collagen membranes with UV cross-linking were prepared. In the in vitro test, scanning electron microscopy, a collagenase assay, and a tensile strength test were performed. The clinical trial involved 14 patients undergoing a ridge preservation procedure. All participants were randomly divided into the test group, which received UV cross-linked membranes (n=7), and the control group, which received chemically cross-linked membranes (n=7). BCP bone substitutes were used for both the test group and the control group. Cone-beam computed tomography (CBCT) scans were performed and alginate impressions were taken 1 week and 3 months after surgery. The casts were scanned via an optical scanner to measure the volumetric changes. The results were analyzed using the nonparametric Mann-Whitney U test. Results: The fastest degradation rate was found in the collagen membranes without the addition of BCP. The highest enzyme resistance and the highest tensile strength were found when the collagen-to-BCP ratio was 1:1. There was no significant difference in dimensional changes in the 3-dimensional modeling or CBCT scans between the test and control groups in the clinical trial (P>0.05). Conclusions: The addition of BCP and UV cross-linking improved the biocompatibility and the mechanical strength of the membranes. Within the limits of the clinical trial, the sites grafted using BCP in combination with UV cross-linked and BCP-added collagen membranes (test group) did not show any statistically significant difference in terms of dimensional change compared with the control group.

• Journal of Korean Dental Science
• /
• 제14권1호
• /
• pp.12-25
• /
• 2021

Purpose: (i) To evaluate the biologic properties of a bi-layered 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride-cross-linked collagen membrane (CCM) in vitro. (ii) To assess the efficacy of CCM for localized bone regeneration in vivo. Materials and Methods: Biodegradation of CCM compared to a native collagen membrane (NCM) was assessed in vitro. In vivo, twelve male New Zealand White rabbits were used. Four calvarial, circular defects (diameter 8 mm) were created in each animal. The sites were randomly allocated to i) CCM+biphasic calcium phosphate (BCP) (CCM-BCP group), ii) CCM alone (CCM), iii) BCP alone (BCP) and, iv) negative control (control). Animals were sacrificed at 2 (n=6) and 8 weeks (n=6). Outcome measures included: micro-computed tomography (μCT) analysis (total augmented volume [TAV], new bone volume) and histomorphometry (total augmented area [TAA], newly formed bone, remaining membrane thickness [RMT]). Result: CCM was more resistant to degradation than NCM. μCT analysis showed CCM-BCP (196.43±25.30 mm³) and BCP (206.23±39.13 mm³) groups had significantly (P<0.01) larger TAV than the control (149.72±12.28 mm³) after 8 weeks. Histomorphometrically, CCM-BCP group (17.75±5.97 mm²) had significantly (P<0.01) greater TAA compared to the CCM group (7.74±2.25 mm²) and the control (8.13±1.81 mm²) after 8 weeks. After 8 weeks, RMT was reduced by 67%. Conclusion: CCM can be a favorable choice of barrier membrane when performing guided bone regeneration (GBR) in localized bone defects. CCM has better resistance to degradation than the natural collagen membrane, in vitro. In vivo, CCM provides an advantageous integration of prolonged barrier function and biocompatibility for GBR.

• 한국수소및신에너지학회논문집
• /
• 제18권4호
• /
• pp.391-398
• /
• 2007

The covalently cross-linked sulfonated polyetheretherketone (CL-SPEEK) membrane was prepared by four-step synthesis of sulfonation-sulfochlorination, partial reduction, lithiation, and cross-linking, and its electrochemical and mechanical properties were investigated for water electrolysis application. The prepared ion exchange membranes showed good electrochemical and mechanical properties; proton conductivity of 0.116 S/cm at $80^{\circ}C$, water uptake of 44.6%, ion exchange capacity of 1.75 meq/g-dry-memb., tensile strength of 64.25 MPa and elongation of 61.11%. The membrane electrode assembly (MEA) with homemade membranes were prepared by non-equilibrium impregnation-reduction (I-R) method. Especially, the electrochemical surface area (ESA) and roughness factor of CL-SPEEK electrolyte by cyclic voltammetry method were 23.46 $m^2/g$ and 307.3 $cm^2-Pt/cm^2$, respectively. The prepared MEA was used in the unit cell of water electrolysis and the cell voltage was 1.81 V at 1 A/$cm^2$ and $80^{\circ}C$, with platinum loadings of 1.31 mg/$cm^2$.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.80.2-80.2
• /
• 2010

The development of high temperature-proton exchange fuel cell (HT-PEFC) is a key in solving the problem of carbon monoxide poisoning of the platinum at anode as well as water management in PEFCs operated below $90^{\circ}C$. In order to overcome these main issues, PEFCs must be operated at high temperature above $120^{\circ}C$. Ionic liquids are available for HT-PEFC due to exhibiting non-volatility and thermal stability. Ionic liquids are however leached out from polymeric matrix resulting in the increase of gas permeability. In this study, we have prepared and characterized the composite membranes with the ionic liquids consisting of 1-(4-vinylbenzyl)-3-butyl imidazolium chloride immobilized by the cross-linkers in pore-filling membrane to prevent to be leached out from the membrane. We confirmed that cross-linked ionic liquids were not leached out from the composite membranes through the various characteristic analyses. It was also verified that the prepared membranes are thermally stable from the result of TG analysis. The pore-filling membranes with the immobilized ionic liquids have a high proton conductivity over $10^{-2}$ S/cm at high temperature (> $120^{\circ}C$).

• Journal of Periodontal and Implant Science
• /
• 제50권5호
• /
• pp.327-339
• /
• 2020

Purpose: The purpose of this study was to examine the local tissue reactions associated with 3 different poly(lactic-co-glycolic acid) (PLGA) prototype membranes and to compare them to the reactions associated with commercially available resorbable membranes in rats. Methods: Seven different membranes-3 synthetic PLGA prototypes (T1, T2, and T3) and 4 commercially available membranes (a PLGA membrane, a poly[lactic acid] membrane, a native collagen membrane, and a cross-linked collagen membrane)-were randomly inserted into 6 unconnected subcutaneous pouches in the backs of 42 rats. The animals were sacrificed at 4, 13, and 26 weeks. Descriptive histologic and histomorphometric assessments were performed to evaluate membrane degradation, visibility, tissue integration, tissue ingrowth, neovascularization, encapsulation, and inflammation. Means and standard deviations were calculated. Results: The histological analysis revealed complete integration and tissue ingrowth of PLGA prototype T1 at 26 weeks. In contrast, the T2 and T3 prototypes displayed slight to moderate integration and tissue ingrowth regardless of time point. The degradation patterns of the 3 synthetic prototypes were similar at 4 and 13 weeks, but differed at 26 weeks. T1 showed marked degradation at 26 weeks, whereas T2 and T3 displayed moderate degradation. Inflammatory cells were present in all 3 prototype membranes at all time points, and these membranes did not meaningfully differ from commercially available membranes with regard to the extent of inflammatory cell infiltration. Conclusions: The 3 PLGA prototypes, particularly T1, induced favorable tissue integration, exhibited a similar degradation rate to native collagen membranes, and elicited a similar inflammatory response to commercially available non-cross-linked resorbable membranes. The intensity of inflammation associated with degradable dental membranes appears to relate to their degradation kinetics, irrespective of their material composition.

• 멤브레인
• /
• 제19권4호
• /
• pp.310-316
• /
• 2009

조직 공학용 지지체로 사용할 목적으로 제조된 가교된 lactide/hyaluronic acid (LA/HA) 막의 분해 특성을 살펴보았다. 가교제 1,3-butadiene diepoxide (BD), 1-ethyl-3-(3-dimethyl aminopropyl) carbodiimide (EDC)를 사용하여 얻어진 고분자 막을 $37^{\circ}C$로 조절된 항온조에서 증류수에 침전시켜 분해시켰다. 가교반응시 LA/HA 몰비가 작을수록, 가교제의 농도가 작을수록 생성된 고분자 막의 분해속도가 증가하였다. 분해될 때 막의 구조 변화를 살펴보기 위해 분해 전, 3일, 6일, 9일 후의 시료를 채취하여 핵자기 공명 분광법으로 분자 구조를 살펴보았다. EDC로 가교시킨 막의 경우 시간이 지남에 따라 HA-EDC 결합구조는 서서히 분해되는데 HA-LA 결합구조는 급격히 분해되어 6일 후에는 완전히 소멸되었다. BD로 가교시킨 막의 경우 가교된 결합 구조 모두 서서히 분해되었으며 3일, 6일이 지나면서 HA-BD 결합 구조는 원래의 89, 83%가 유지되었으나 HA-LA 결합 구조는 원래의 83, 65%로 유지되었다. 분해된 막을 전자 현미경으로 측정한 결과 분해 전후 표면에서 기공의 밀도는 크게 차이나지 않았으며, 표면과 측면의 구조도 크게 차이가 나지 않아 조직공학용 재료로써 사용할 때 아무런 문제가 없는 것으로 관찰되었다.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2010년도 춘계학술 발표회
• /
• pp.193-193
• /
• 2010

• 한국수소및신에너지학회논문집
• /
• 제20권3호
• /
• pp.194-201
• /
• 2009

The e1ectrocatalytic properties of heteropolyacids(HPAs) entrapped in covalently cross-linked sulfonated polyetheretherketone(CL-SPEEK/HPA) membranes have been studied for water electrolysis. The HPAs, including tungstophosphoric acid(TPA), molybdophosphoric acid(MoPA), and tungstosilicic acid(TSiA) were used as additives in the composite membranes. The MEA was prepared by a non-equilibrium impregnation-reduction(I-R) method, using reducing agent, sodium borohydride(NaBH4) and tetraamineplatinum(II) chloride(pt(NH$_3$)$_4$Cl$_2$). The electrocatalytic properties of composite membranes such as the cell voltage were in the order of magnitude CL-SPEEKlMoPA40 (wt%) > /TPA30 > /TSiA40. In the optimum cell applications for water electrolysis, the cell voltage of PtlPEM/Pt-Ru MEA with CL-SPEEKlTPA30 membrane was 1.75 V at 80$^{\circ}$C and I A/cm$^2$ and this voltage carried lower than that of 1.81 V of Nafion 117. Consequently, in regards of electrochemical and mechanical characteristics and oxidation durability, the newly developed CL-SPEEKITPA30 composite membrane exhibited a better performance than the others, but CLSPEEKlMoPA40 showed the best electrocatalytic activity (1.71 Vat 80$^{\circ}$C and 1 A/cm$^2$) among the composite membranes.

• 멤브레인
• /
• 제10권3호
• /
• pp.148-154
• /
• 2000

본 연구에서는 sulfur-succinic acid의 가교제를 이용한 가교된 폴리비닐알코올(poly(vinyl alcohol), PVA) 가교막을 이용하여 MTBE-methanol 혼합액에 대하여 조업온도, 가교제의 조성에 따른 증기투과 공정의 투과 특성을 조사 하였다. 팽윤 실험을 통해 PVA/SSA 가교막에 대하여 가교제 조성에 따른 막의 구조와 PVA의 하이드록실기(-OH), SSA의 설폰기(-$SO_3$H)와 용매와의 수소결합의 두 가지 인자가 상호 보완적으로 작용하고 있음을 알 수 있었다. 투과 특성에 있어 SSA의 설폰기가 중요한 인자로 작용하였다. 예를 들면 7% SSA 막에 대해서는 수소결합의 효과보다는 가교도의 효과가 투과 특성에 중요한 요인으로 작용하며 5% SSA에 대해서는 수소결합의 효과가 중요하게 작용하였다. 증기투과 공정에 있어 막과 직접 접촉하는 증기상이 액상에 비하여 methanol의 농도가 낮아 PVA의 하이드록실기와 methanol과의 수소결합 확률이 감소함에 따라 투과 특성에 영향을 미친다. 결과적으로 7% SSA 막에 대하여 MTBE/mthanol=80/20 혼합액에 대하여 공급액의 온도 3$0^{\circ}C$에서 선택도 2187, 투과도 4.84g/$m^2$hr를 보여 주었다.