• 마이크로전자및패키징학회지
• /
• 제16권2호
• /
• pp.21-25
• /
• 2009

The organic-inorganic thin film transistors (OITFTs) with ZnO channel layer and the cross-linked PVP (Poly-4-vinylphenol) gate insulator were fabricated on the patterned ITO gate/glass substrate. ZnO channel layer was deposited by using atomic layer deposition (ALD). In order to improve the electrical properties, $O_2$ plasma treatment onto PVP film was introduced and investigated the effect of the plasma treatments on the electrical properties of the OITFTs. The field effect mobility and sub-threshold slope (SS) values of the OITFT decreased slightly from 0.24 to 0.16 $cm^2/V{\cdot}s$ and from 9.7 to 9.2 V/dec, respectively with increasing RF power from 30 to 50 Watt. The $I_{on/off}$ ratio was about $10^3$ for all samples with $O_2$ plasma treatment.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2007년도 춘계학술대회
• /
• pp.218-220
• /
• 2007

유기박막트랜지스터(organic thin film transistor, OTFT)의 게이트 절연막으로 PVP(poly-4-vinylphenol) 물질을 이용하여 MIM (metal-insulator-metal) 구조의 캐패시터 소자를 제작하였다. 유기 절연층의 형성은 ITO/Glass 기판 위에 PVP를 용질로, PGMEA(propylene glycol monomethyl ether acetate)를 용매로 사용하였다. 또한 열경화성 수지인 poly(melamine-co-formaldehyde)를 사용하여 cross-linked PVP 절연막을 합성하여 스핀코팅법으로 소자를 형성하였다. 제작된 소자에 대해 절연막 두께에 따른 전기적 특성을 조사한 결과 300 nm 에서 500 nm로 두께가 증가할수록 누설전류는 10.69 nA 에서 0.1 nA 로 크게 감소하였다. 또한 캐패시터 소자의 정전용량은 300 nm 의 두께에서 1.05 nF 으로 500 nm 의 두께에서의 0.65 nF 과 비교하여 보다 양호한 특성이 나타났다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.375-378
• /
• 2004

In this paper, we fabricated pantacene TFTs using PVP copolymer and cross-linked PVP as gate insulator on glass and plastic (PET) substrate. Depending on the density of PVP and poly (melamine-co-formaldehyde) the performance has been changed. We obtained the best performance with the mobility of 0.12cm2/V sec and the on/off current ratio of $1.19{\times}10^6$ for the case of $10wt\%$ PVP copolymer mixed with $5wt\%$ poly(melamine-co-formaldehyde). Additionally using OTFTs with the above PVP gate insulator, we fabricated the integrated circuit including inverter which produced the gain of 5.56 on the glass substrate and gain of 9.7 on the plastic (PET) substrate. And the threshold voltage was respectively +8V and +14v$ldots$

• Bulletin of the Korean Chemical Society
• /
• 제34권6호
• /
• pp.1741-1744
• /
• 2013

A new polymeric catalyst was prepared by supporting $GaCl_3$ on cross-linked polyvinylpyrrolidone ($GaCl_3$/PVP). This catalyst was employed for efficient and regioselective ring-opening reaction of epoxides by various alcohols under solvent-free conditions at room temperature. In our procedure, this heterogeneous catalyst was used at neutral and mild reaction conditions to afford high yields of ${\beta}$-alkoxy alcohols. Also, regioselective conversion of epoxides to ${\beta}$-azidohydrines was accomplished by sodium azide in MeOH in the presence of $GaCl_3$/PVP at room temperature. $GaCl_3$/PVP is a non-hygroscopic and recoverable catalyst and is easily separated from reaction mixture by a simple filtration and re-used repeatedly. Also, this catalyst has good handling and can be stored for long time without any reducing of its reactivity.

• 반도체디스플레이기술학회지
• /
• 제16권1호
• /
• pp.97-101
• /
• 2017

In this paper, IGZO thin film transistor (TFT) was fabricated with cross-linked Poly (4-vinylphenol) (PVP) gate dielectric for flexible, transparent display applications. The PVP is one of the candidates for low-temperature gate insulators. MIM structure was fabricated to measure the leakage current and evaluate the insulator properties according to the annealing temperature. Low leakage current ( <0.1nA/cm2 @ 1MV/cm ) was observed at $200^{\circ}C$ annealing condition and decreases much more as the annealing temperature increases. The electrical characteristics of IGZO TFT such as subthreshold swing, mobility and ON/OFF current ratio were also improved, which shows that the performance of IGZO TFTs with PVP can be enhanced by reducing the amount of incomplete crosslinking in PVP.

• 대한전자공학회논문지SD
• /
• 제45권7호
• /
• pp.1-8
• /
• 2008

본 논문에서는 플라스틱 기판에 OTFT를 스위칭 소자로 사용하여 유연한 EPD 패널을 제작하였다. OTFT의 채널 폭과 길이의 비(W/L)는 EPD의 응답속도를 고려하여 15이상으로 설계를 하였다. 게이트전극은 Al, 절연층은 cross-linked PVP, 반도체층은 펜타센, 중간층은 PVA/Acryl를 사용하였다. 플라스틱 기판은 보호층 처리를 통하여 열처리 공정 시 발생하는 입자를 제거하였고, 거친 표면을 평탄화하였다. 반도체층의 크기는 게이트 전극 보다 작도록 제한하여 누설전류를 줄일 수 있었다. EPD-상판과 OTFT-하판 사이에 픽셀전극을 삽입하고 또한 OTFT-하판을 보호하기 위하여 PVA/Acryl로 구성된 중간층을 상빙하였다. 완성된 OTFT-하판에서 OTFT의 이동도는 $0.21cm^2/V.s$, 전류점멸비(Ion/Ioff)는 $10^5$ 이상의 성능을 보였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.289.1-289.1
• /
• 2014

In this study, we made a organic thin film device in MIS(Metal-Insulator-Semiconductor) structure by using PVP (Poly vinyl phenol) as a insulating layer, and CdSe/ZnS nano particles which have a core/shell structure inside. We dissolved PVP and PMF in PGMEA, organic solvent, then formed a thin film through a spin coating. After that, it was cross-linked by annealing for 1 hour in a vacuum oven at $185^{\circ}C$. We operated FTIR measurement to check this, and discovered the amount of absorption reduced in the wave-length region near 3400 cm-1, so could observe decrease of -OH. Boonton7200 was used to measure a C-V relationship to confirm a properties of the nano particles, and as a result, the width of the memory window increased when device including nano particles. Additionally, we used HP4145B in order to make sure the electrical characteristics of the organic thin film device and analyzed a conduction mechanism of the device by measuring I-V relationship. When the voltage was low, FNT occurred chiefly, but as the voltage increased, Schottky Emission occurred mainly. We synthesized CdSe/ZnS and to confirm this, took a picture of Si substrate including nano particles with SEM. Spherical quantum dots were properly made. Due to this study, we realized there is high possibility of application of next generation memory device using organic thin film device and nano particles, and we expect more researches about this issue would be done.

• 한국응용과학기술학회지
• /
• 제27권2호
• /
• pp.137-143
• /
• 2010

Oxide semiconductors Thin-film transistors are an exemplified one owing to its excellent ambient stability and optical transparency. In particular zinc oxide (ZnO) has been reported because It has stability in air, a high electron mobility, transparency and low light sensitivity, compared to any other materials. For this reasons, ZnO TFTs have been studied actively. Furthermore, we expected that would be satisfy the demands of flexible display in new generation. In order to do that, ZnO TFTs must be fabricated that flexible substrate can sustain operating temperature. So, In this paper we have studied low-temperature process of zinc oxide(ZnO) thin-film transistors (TFTs) based on silicon nitride ($SiN_x$)/cross-linked poly-vinylphenol (C-PVP) as gate dielectric. TFTs based on oxide fabricated by Low-temperature process were similar to electrical characteristics in comparison to conventional TFTs. These results were in comparison to device with $SiN_x$/low-temperature C-PVP or $SiN_x$/conventional C-PVP. The ZnO TFTs fabricated by low-temperature process exhibited a field-effect mobility of $0.205\;cm^2/Vs$, a thresholdvoltage of 13.56 V and an on/off ratio of $5.73{\times}10^6$. As a result, We applied experimental for flexible PET substrate and showed that can be used to ZnO TFTs for flexible application.

• 대한전자공학회논문지SD
• /
• 제42권12호
• /
• pp.13-18
• /
• 2005

본 논문에서는 Poly-ethylene-terephthalate (PET) 기판 위에 Organic Thin Film Transistor (OTFT)와 Organic Light Emitting Diode (OLED)를 직렬 연결시킨 픽셀과 64 x 64 픽셀로 구성된 어레이를 제작하여 동작을 시연하였다. OTFT는 PET 기판과의 호환성을 고려하여 Poly 4-vinylphenol을 게이트 절연체로, 펜타센을 활성층으로 사용하여 제작되었다. 개별 소자 수준에서는 이동도가 $1.0\;cm^2/V{\cdot}sec$로 나타났으나, 어레이에서는 $0.1\~0.2\;cm^2/V{\cdot}sec$로 약 10배 정도 감소하였다. 어레이의 동작을 분석하였고 OTFT의 OLED에 대한 전류구동능력을 확인하였다.

• 대한전자공학회논문지SD
• /
• 제47권8호
• /
• pp.7-12
• /
• 2010

본 논문에서는 BPhen(Bathophenanthroline)과 BPhen에 Cs가 도핑 된 interlayer를 $C_{60}$활성층과 Al전극사이에 주입해 $C_{60}$을 기반으로 한 유기박막트랜지스터 (OTFTs)를 제작하여 전기적 특성을 향상시켰다. BPhen층을 증착하면 유기물과 금속층계면의 표면 거칠기가 낮아져 결과적으로 성능이 향상되는 것을 알 수 있었다. 또한 BPhen에 Cs가 도핑 된 interlayer를 co-evaporation을 이용하여 주입하였을 경우는 Contact resistance가 감소하였다. 이러한 $C_{60}$을 기반으로 한 BPhen에 Cs가 도핑 된 interlayer를 삽입한 유기박막트랜지스터는 향후 n형 유기박막트랜지스터를 제작하는데 있어서 적용이 될 것이라고 기대된다.