• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.9
• /
• pp.2266-2284
• /
• 2012

Recent studies have indicated that a significant improvement in wireless video throughput can be achieved by Cross Layer Design with Side-information (CLDS) protocols. In this paper, we derive the operational rate of a CLDS protocol operating over a realistic wireless channel. Then, a Rate-Distortion (R-D) empirical model for above-capacity Scalable Video Coding (SVC) is deduced to estimate the loss of video quality incurred under inaccurate rate estimation scenarios. Finally, we develop a novel Unequal Error Protection (UEP) scheme which leverages the characteristics of LDPC codes to reduce the distortion of video quality in case of typically-observed burst wireless errors. The efficacy of the proposed rate adaptation architecture over conventional protocols is demonstrated by realistic video simulations using actual IEEE 802.11b wireless traces.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.503-504
• /
• 2007

The most Important thing in Sensor Network Design is a Energy Efficiency. Limited sources of Sensor Mote tan occur merging of Protocol. In this paper, we proposed Cross Layer Protocol for Energy Efficienty. The proposed protocol can increase the network life time using multi hop transmission. sensor network should use multi hop communication and small radius because radio in wireless communication is the most spendable thing in sensor network.

• Journal of Korea Multimedia Society
• /
• v.19 no.8
• /
• pp.1404-1414
• /
• 2016

Cross-layer design is a concept, which captures the dependencies and interactions and enables information sharing among layers in order to improve the network performance and security. There are two key challenges in wireless networks, lossy features of links and power assumption of network nodes. Cross-layer design of congestion control and power allocation in wireless lossy networks has been studied in the existing literature; however, there has been no contribution proposed in the literature that exploits the path diversity. In this paper, we are motivated to develop a cross-layer design of congestion control and power allocation, which takes into account lossy features of wireless links and transmission powers of network nodes and can be implemented in a distributed manner. Numerical simulation is conducted to illustrate the performance of our proposed algorithm and the comparison with current alternative approaches.

• Journal of Korea Multimedia Society
• /
• v.18 no.2
• /
• pp.168-177
• /
• 2015

To increase the overall utility and decrease the link delay and power consumption, a joint optimal cross-layer design of congestion control at the transport layer, link delay at the data link layer and power allocation at the physical layer for mobile ad hoc networks is considered in this paper. As opposed to previous work, the rate outage probability in this work is based on exactly closed-form; therefore, the proposed method can guarantee the globally optimal solutions to the underlying problem. The non-convex formulated problem is transformed into a convex one, which is solved by exploiting the duality technique. Finally, simulation results verify that our proposal achieves considerable benefits over the existing method.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.4
• /
• pp.16-24
• /
• 2012

To characterize the coating structure, diverse methods such as mercury intrusion, nitrogen adsorption and oil absorption methods have been developed and widely employed. These indirect techniques, however, have some limitation to explain the actual coating structure. Recently microscopic observation methods have been tried for analyzing structural characteristics of coating layers. Preparation of the undamaged cross section of a coating layer is essential for obtaining high quality image for analysis. In this study, distortion-free cross-section of the coating layer was prepared using a grinding and polishing technique. The coated paper was embedded in epoxy resin and cured. After curing the resin block it was ground with abrasive papers and then polished with diamond particle suspension and nylon cloth. Polished coating layer was sufficient enough to obtain undamaged cross sectional images with scanning electron microscope under backscattered electron image mode. In addition, the SEM images allowed distinction of the coating layer components. Also S/B latex film formed between pigment particles was visualized by osmium tetroxide staining. Pore size distribution and pore orientation were evaluated by image analysis from SEM cross-sectional images.

• Membrane and Water Treatment
• /
• v.6 no.3
• /
• pp.173-187
• /
• 2015

The goal of present work is the preparation of a novel positively charged nanofiltration (NF) membrane and its development for the cation removal of aqueous solutions. This NF membrane was fabricated by the surface modification of polysulfone (PSf) ultrafiltration support. The active top-layer was formed by interfacial cross-linking polymerization of poly(ethyleneimine) (PEI) with p-xylylene dichloride (XDC) and then quaternized with methyl iodide to form a perpetually positively charged layer. In order to improve the efficiency of nanofiltration membrane, the concentration of PEI, XDC and methyl iodide solutions, PEI coating and cross-linking time have been optimized. As a result, a high water flux and high $CaCl_2$ rejection (1,000 ppm) was obtained for the composite membrane with values of $18.29L/m^2.h$ and 93.62% at 4 bar and $25^{\circ}C$, respectively. The rejections of NF membrane for different salt solutions followed the order of $Na_2SO_4$ < $MgSO_4$ < NaCl < $CaCl_2$. Molecular weight of cut off (MWCO) was calculated via retaining of PEG solutions with different molecular weights that finally, it revealed the Stokes and hydrodynamic radius of 1.457 and 2.507 nm on the membrane selective layer, respectively. The most efficient positively charged nanofiltration membrane exhibited a $Ni^{2+}$ rejection of 96.26% for industrial wastewater from Shamse Hadaf Co. (Kashan, Iran).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2A
• /
• pp.95-104
• /
• 2010

In wireless communication system, a variety of retransmission algorithms are used in order to improve the quality of service of users. But the system may be inefficient because retransmission algorithms operate independently with other layers. Also, the quality of service can be degraded due to the unnecessary retransmission of packets. To solve these problems, the study on the cross-layer retransmission schemes have been widely performed. However, in order to apply cross-layer retransmission schemes to wireless communication system, whether the performance of cross-layer retransmission schemes meets QoS requirements of each service class has to be verified. Thus, this paper proposes the mathematical model for analyzing the performance of the cross-layer retransmission schemes and derives both the suitable retransmission scheme and the optimal retransmission parameter on each service class. The proposed mathematical model selects the MCS level based on channel state information and The performance analysis is comparatively easy in case that HARQ, ARQ, and AMC schemes are combined. The proposed mathematical model also enables the analysis of the packet transmission delay. To utilize the analytical model, this paper derives the suitable retransmission scheme and the optimal retransmission parameter for delay sensitive services in WiMAX system. Also, the proposed analytical model can be used to analyze the performance of wireless communication system such as LTE and WLAN.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11B
• /
• pp.981-988
• /
• 2008

In this paper, the efficient AODV routing algorithm in MANET is proposed. Because transmission channel has a high error rate and loss in MANET, the number of hops can't be regarded as an absolute network metric. After measuring FER periodically at the data link layer using cross-layer design, the scheme that every node forwards the weight of link status in the reserved field of AODV protocol is used. In order to find the efficient route, we design AODV to be able to select an optimal route that has a good channel status by evaluating the sum of weight. The proposed AODV improves throughput, routing overhead and average end-to-end delay in comparison with the generic AODV.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.279-282
• /
• 2006

최근 무선통신 서비스에서 이동성을 추가하여 이동 네트워크 서비스를 제공하기 위해 사용하는 MIPv6, FMIPv6는 긴 핸드오프 지연시간으로 인한 통신 품질의 저하 및 제어/관리 메시지로 인하여 다량의 데이터 패킷 손실, 고비용등과 같은 단점을 가지고 있다. 특히, 각 단말에서 시행하는 주소의 생성 및 유일성 검사를 위한 DAD(Duplication Address Detection)는 핸드오프 지연시간의 가장 큰 영향을 미치는 요소로서 이에 대한 연구가 요구된다. 본 논문에서는 L2(Layer 2)의 재결합 절차 상 MR(Mobile Router)/AR(Access Router)에서 직접 유일성 검사를 마친 후 생성된 주소를 재결합 응답 프레임에 추가시켜 할당하는 Cross-Layer방식을 제안한다. 또한 할당된 주소관리와 생성된 주소의 유일성 검사를 위한 캐쉬도입을 고려하여 성능평가를 하였다. 제안된 방식은 기존 알고리즘들보다 전체 핸드오프 지연시간이 $30{\sim}80%$정도의 감소효과를 보이고 있으며, 비용관점에서도 약 56%의 절감효과를 확인할 수 있었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10B
• /
• pp.1175-1181
• /
• 2011

For vertical handover, the part for the homogeneous handover needs to be modified, which allows users to utilize the various wireless access schemes with a mobile terminal with PFMIPv6. In this paper, we considered a cross-layer design for fast vertical handover between MIH and PFMIPv6, where two MIH-layer messages are suggested to reduce handover latency and integrate between MIH and PFMIPv6 efficiently. The proposed scheme is evaluated with handover latency. The results show that the proposed handover procedure reduces handover latency compared with the existing one.