• Bulletin of the Korean Chemical Society
• /
• 제20권11호
• /
• pp.1345-1347
• /
• 1999

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.561-563
• /
• 1999

The looper of a hot strip finishing mill is installed between each pair of stands and plays a key role to enhance the product quality of strip by controlling the tension and height of strip in each inter-stand. Though the conventional looper control has achieved the mass products of strip so far, it has difficulties not only tuning gains by means of errors which are caused by coupling effects between strip tension and looper angle both utilizing tension feedback. Therefore, the non-interactive control employing cross controller and tension feedback has been introduced in looper control system in order to overcome the coupling effects existing between tension and looper angle and track the reference tension efficiently. In this paper, we present the cross controllers which play a role to decouple reciprocal effects between tension and looper angle and show better performance.

• Journal of Power Electronics
• /
• 제19권4호
• /
• pp.1034-1044
• /
• 2019

In medium-voltage and high-voltage high-power converters, the switching devices need to operate at a low switching frequency to reduce power loss and increase the power capacity. This increases the delay of the signal sampling and PWM. It also makes the cross-couplings of the d-q current components more severe. In addition, the LCL filter has three cross-coupling loops and is prone to resonance. In order to solve these problems, this paper establishes a complex vector model of an LCL type grid-connected converter. Based on this model, two multiple decoupling current control strategies with passive damping / notch damping are proposed for the LCL type grid-connected converter. The proposed strategies can effectively eliminate the cross-couplings of the converter, achieve independent control of the d-q current components, expand the stable region and suppress the resonance of the LCL filter. Simulation and experimental results verify the correctness of the theoretical analysis and the feasibility of the proposed strategies.

• Geomechanics and Engineering
• /
• 제37권3호
• /
• pp.293-306
• /
• 2024

Influenced by the alternating effects of dynamic and static pressure during the mining process of close range coal seams, the surrounding rock support of cross mining roadway is difficult and the deformation mechanism is complex, which has become an important problem affecting the safe and efficient production of coal mines. The paper takes the inclined longwall mining of the 10304 working face of Zhongheng coal mine as the engineering background, analyzes the key strata fracture mechanism of the large inclined right-angle trapezoidal mining field, explores the stress distribution characteristics and transmission law of the surrounding rock of the roadway affected by the mining of the inclined coal seam, and proposes a segmented and hierarchical support method for the cross mining roadway affected by the mining of the close range coal seam group. The research results indicate that based on the derived expressions for shear and tensile fracture of key strata, the ultimate pushing distance and ultimate suspended area of a right angle trapezoidal mining area can be calculated and obtained. Within the cross mining section, along the horizontal direction of the coal wall of the working face, the peak shear stress is located near the middle of the boundary. The cracks on the floor of the cross mining roadway gradually develop in an elliptical funnel shape from the shallow to the deep. The dual coupling support system composed of active anchor rod support and passive U-shaped steel shed support proposed in this article achieves effective control of the stability of cross mining roadways, which achieves effective control of floor by coupling active support and preventive passive support to improve the strength of the surrounding rock itself. The research results are of great significance for guiding the layout, support control, and safe mining of cross mining roadways, and to some extent, can further enrich and improve the relevant theories of roof movement and control.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.388-391
• /
• 2003

Disturbance observer(DOB) is effective to enhance the performance of system in the presence of disturbances. Various types of disturbance observer have been proposed to improve sensitivity function of system. However, it has been observed that current DOBs tend to bring poor transient response due to cross-couplings. This paper proposes a new type of disturbance observer to reduce effect of cross-couplings and provide simpler structure than Dual DOB. Finally, we verify the performance of the proposed DOB through numerical simulations.

• Bulletin of the Korean Chemical Society
• /
• 제34권1호
• /
• pp.42-48
• /
• 2013

Potassium N-heterobiaryltrifluoroborates were successfully prepared via a selective Cu-catalyzed C-N coupling reaction. The $BF_3K$ moiety was well tolerated under the reaction conditions involving CuI and dimethyl-ethylenediamine (DMEDA) in the presence of DMSO. The Pd-catalyzed Suzuki-Miyaura cross couplings of potassium N-heterobiaryltrifluoroborates with bromoarenes were studied to prepare the N-heterotriaryl compounds. Moreover, homocoupling, iodination, and hydroxylation of potassium N-heterobiaryltrifluoroborates provided the corresponding products in high yields.

• Elastomers and Composites
• /
• 제25권2호
• /
• pp.112-116
• /
• 1990

In this study, as one way of developing the new cross-linking method that is curable in water, kinetic analysis of solution reaction between CR and silane coupling agents was attemped. First, CR was reacted with silane coupling agents in solution state. According to the time, reaction quantity was pursued by gas chromatography. Also, reaction rate coefficient and activation energy were calculated from the reaction quantity. Silane coupling agents which were used in this study were MPS, CPS and VES.

• 한국전자파학회논문지
• /
• 제14권9호
• /
• pp.924-930
• /
• 2003

감쇠극을 갖는 새로운 소형화된 마이크로스트립 듀플렉서를 제안한다. 2개의 3-극 대역통과 CT필터를 서로 비대칭적인 전송영점을 갖도록 설계 및 제작하였다. 제안된 3-극 대역통과 CT 필터는 결합구조를 변화시켜 감쇠극의 위치를 원하는 주파수 대역으로 옮길 수 있을 뿐만 아니라 필터의 저지대역 차단 특성을 향상시킬 수 있다. 교차 결합 대역통과 CT 필터를 이용한 듀플렉서의 측정결과 일반적인 필터를 이용한 경우보다 우수한 격리도와 차단 특성을 나타냈고, 시뮬레이션 결과와 거의 일치하였다.

• 한국인터넷방송통신학회논문지
• /
• 제13권2호
• /
• pp.47-52
• /
• 2013

플라즈마 다중모드 간섭 결합기 (MMIC)를 계단형으로 구성하여 전형적인 방법으로 설계된 MMIC 보다 결합길이를 현저하게 줄일 수 있는 새로운 구조가 본 논문에서 제안되었다. 전송폭이 계단형인 플라즈마 MMIC에서 60%의 cross 전력분배율에 대하여, 결합길이는 약 42%가 줄어들었다. 또한, 굴절률 변화에 따른 플라즈마 MMIC의 전력분배율과 결합길이는 약 2~6%로 거의 변화가 없었으나, 전송폭을 변화 시켰을 때 전력분배율과 결합길이는 약 30~40%로 큰 변화를 나타내었다.

• Journal of electromagnetic engineering and science
• /
• 제16권1호
• /
• pp.19-23
• /
• 2016

This paper presents a novel design for dual-band bandpass filters. The proposed filters are applicable to the carrier aggregation of the TV white space (TVWS) band and long-term evolution (LTE) band for cognitive radio applications. The lower passband is the TVWS band (470-698 MHz) whose fractional bandwidth is 40 %, while the higher passband is the LTE band (824-894 MHz) with 8 % fractional bandwidth. Since the two passbands are located very close to each other, a transmission zero is inserted to enhance the rejection level between the two passbands. The TVWS band filter is designed using magnetic coupling to obtain a wide bandwidth, and the LTE band filter is designed using dielectric resonators to achieve good insertion loss characteristics. In addition, in the proposed design, a transmission zero is placed with cross-coupling. The proposed dual-band bandpass filter is designed as a two-port filter (one input/one output) as well as a three-port filter (one common input/two outputs). The measured performances show good agreement with the simulated performances.