• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.4 s.70
• /
• pp.395-404
• /
• 2005

This paper presents a reliable numerical procedure for nonlinear time-history analysis of space steel frames subjected to dynamic loads. Geometric nonlinearities of member (P-$\delta$) and frame (P-$\Delta$) are taken into account by the use of stability functions in framed stiffness matrix formulation. The gradual yielding along the member length and over the cross section is included by using a tangent modulus concept and a softening plastic hinge model based on the New-Orbison yield surface. A computer program utilizing the average acceleration method for the integration scheme is developed to numerically solve the equation of motion of framed structure formulated in an incremental form. The results of several numerical examples are compared with those derived from using beam element model of ABAQUS program to illustrate the accuracy and the computational efficiency of the proposed procedure.

• Journal of the East Asian Society of Dietary Life
• /
• v.17 no.5
• /
• pp.661-670
• /
• 2007

To investigate the market potential for developing Gochujang(a traditional Korean hot pepper soybean paste) products in the UK including the European market, a qualitative consumer study utilizing focus groups was conducted on the $23rd{\sim}25^{th}$ of May, 2005. The focus group approach utilizes small groups of consumers and is very effective in determining the ways in which a product can be used, by examining consumer perceptions on the overall sensory properties of a product as well as variations in taste, flavour, and texture. A series of six consumer group studies were carried out in three different locations around the UK. Each group involved approximately eight respondents(a total of 48 respondents) and ran for at least 90 minutes. The respondents were recruited by specific criteria to achieve a cross-section of ages and genders. All respondents purchased, prepared, and ate home-cooked Oriental/Far Eastern cuisine. Consumer reactions to Gochujang in its traditional form, and in manufactured products, were explored in terms of appearance, texture, flavour, and taste the consumers' perceived uses and applications for products were also examined. Many consumers were familiar with ethnic cuisines such as Chinese, Thai, Japanese, Indian, and Tex/Mex, already preparing these foods using various convenience products at home at least twice a week. However, Korean cuisine was not mentioned by any of the respondents. The Gochujang sauce presented during the interview had broad based appeal mainly as a dipping sauce, and to a lesser degree as a marinade. Traditional Gochujang has the potential to inspire consumers who are looking for novel and authentic world cuisine products. From the sensory evaluations of various prototypes developed according to consumer reactions during the focus group interviews, three prototypes(a sauce for chicken, dipping sauce type, and BBQ sauce type) were determined for further consumer preference studies.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.281-284
• /
• 2006

The resistive V dipole (RVD) is a V antenna with both arms loaded with the continuous Wu-King resistive profile. The RVD has many advantages for surface and subsurface probing, such as the ability to radiate a short pulse in a desired direction. The radiated pulse is simply related to the input pulse, e.g., derivative. In addition, it mostly eliminates the multiple reflections between the surface of the ground and the antenna because of its low radar cross section. The drawbacks of the RVD include the high input impedance and the difficulty in implementation. This paper presents ways to improve the accuracy and easiness of the implementation and to improve the low-frequency performance while maintaining the characteristics of the V antenna that are good for probing applications. The implemented antenna is used to form a bistatic radar to scan targets underground, and the result is imaged.

• Economic and Environmental Geology
• /
• v.14 no.1
• /
• pp.27-33
• /
• 1981

The manganese nodule from the Blake Plateau consists mainly of microcrystalline to cryptocrystalline todorokite, with minor quartz, clays, carbonates and phillipsite. The nodule in cross section shows concentric layers, core structure, unconformity and fissure-filling structure megascopically, and colloform, fragmental and diagenetic textures microscopically. A new classification of colloform textures which are applicable to any nodule of any source shows that the colloform textures consist of three basic textural units: banded, cuspate and globular. They occur independently or in combination with each other to form various types of textures. The presence of three predominant textural types suggests that there are three different major modes of nodule growth which are controlled by physical and chemical environments.

• Archives of Plastic Surgery
• /
• v.40 no.6
• /
• pp.715-720
• /
• 2013

Background Many people have an interest in the correction of facial scars or deformities caused by trauma. The increasing ability to correct such flaws has been one of the reasons for the increase in the popularity of facial plastic surgery. In addition to its roles in communication, breathing, eating, olfaction and vision, the appearance of the face also plays an important role in human interactions, including during social activities. However, studies on the importance of the functional role of facial appearance. As a function of the face are scare. Therefore, in the present study, we evaluated the importance of the functions of the face in Korea. Methods We conducted an online panel survey of 300 participants (age range, 20-70 years). Each respondent was administered the demographic data form, Facial Function Assessment Scale, Rosenberg Self-Esteem Scale, and standard gamble questionnaires. Results In the evaluation on the importance of facial functions, a normal appearance was considered as important as communication, breathing, speech, and vision. Of the 300 participants, 85% stated that a normal appearance is important in social activities. Conclusions The results of this survey involving a cross-section of the Korean population indicated that a normal appearance was considered one of the principal facial functions. A normal appearance was considered more important than the functions of olfaction and expression. Moreover, a normal appearance was determined to be an important facial function for leading a normal life in Korea.

• The Korean Journal of Community Living Science
• /
• v.24 no.4
• /
• pp.457-469
• /
• 2013

The purpose of this study is to quantitatively analyze the impacts of the distribution of easing contraction of the sleeve on the external appearance of bodice and sleeve through virtual clothing simulation. Virtual clothing is conducted by differentiating the sleeve easing in accordance with the experimental condition of bodice and sleeve that are followed by draping. And then the evaluation is carried out. As a result of an analysis of the similarity between the virtual garment and the actual clothing, the whole external appearance of the bodice and sleeve was expressed similarly. The external appearance according to the distribution of easing contraction got better as the easing contraction of sleeve was concentrated on sleeve cap in front while the appearance was better at the back as it was more gently distributed than in the front. In a comparison of armhole form, the clothing of which the top of it was most similar to S0 was S4 in which the gap between the armhole and the arm was the least and the front and rear silhouette fell relatively well. In a comparison between the position of bust circumference line and that of the sleeve base line, the front of the sleeve matched the bust circumference line as the easing contraction was distributed close to the center of the sleeve cap while in the back, the sleeve base line and the bust circumference line matched when some easing contraction ratio was added close to the armpit point. The cross section figures of garment space of the shoulder, the margin was evenly distributed in S4 or S5 with differing distributions of easing contraction in the front and the back. This study is significant in that it supplies the objective baseline data which makes a novice more able to make a good external appearance of the sleeve.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.6
• /
• pp.730-736
• /
• 1999

The roundnose flounder's (Eopsetta grigorjewi) spermiogenesis and fine structure of the spermatozoon were examined by means of the scanning and transmission electron microscopy, During the spermiogenesis, the chromatin of the spermatid became fine granular form, and progressively condensed into many large globules, finally homogeneously condensed in the spermatozoan head. The main characteristics of the spermiogenesis were the disappearanre of Golgi complex, the appearance of microfilament the reduction of mitochondria and the appearance of Iysosome in the cytoplasm. A spermatozoon consisted of head and tail, but the acrosome was absent. The cytoplasmic collar containing seven mitochondria was observed in the posterior part of the head. The well-developed axonemal lateral fins were observed in the tail. The cross section of the axial filament showed '9+2' axonemal structure of microtubules, and the numerous vesicles were observed in the cytoplasm.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1998.11a
• /
• pp.89-94
• /
• 1998

Marine sponges are recognized as a plentiful source of diverse biologically active secondary metabolites. Recently, we have initiated a research to discover antitumor constituents from the marine sponges collected from Korean Waters. Marine sponges collected from the South Sea of Korea were screened for several biological activities including such as brine shrimp lethality and cytotoxicity. Significant brine shrimp lethality was detected in the crude extract of a two-sponge association of Poecillastra sp. and Jaspis sp. A cross-section of this sample showed two layers of morphologically distinct sponges. The thin and dirty yellow outer layer was identified as Poecillastra sp. (Pachastrellidae), the surface of which was very rough. The light-grey inner layer was identified as Jaspis sp. (Jaspidae), the surface of which was smooth. This two-sponge association appears to be consistent as these sponges were always found in associated form regardless of collection site or collection period. Investigation of the bioactive constituents monitored by brine shrimp lethality assay led to the isolation of pectenotoxin II (PTX2) and psammaplin A as causative compounds for the brine shrimp lethality. $^1$H- and $\^$13/C-nmr signals of PTX2 was fully assigned utilizing TOCSY, HETCOR, Long-range HETCOR, and Homonuclear J-resolved 2D experiments. PTX2 displayed very potent and selective cytotoxicities in the 60 cell line panel antitumor assay at the NCI. PTX2 has progressed to acute toxicity determination and in vivo antitumor assay at the NCI (Table 1). However, significant in vitro antitumor activity of PTX2 can not be affirmed in the in vivo assay.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.8
• /
• pp.55-62
• /
• 2006

This paper presents experimental evaluation of an insect-mimicking flapping-wing device actuated by a unimorph piezoceramic actuator. Length of each rod and hinge point in the linkage/amplification system are carefully chosen such that the resulting wing motion can mimic clapping of wings in a real insect at the end of upstroke. In addition to this, a pair of corrugated wings are fabricated mimicking zig-zag cross section of a real insect wing. Thanks to the two additional implementation, the improved flapping wing device can generate a larger lift force than the previous model even though area of the new wing is about 50% less than that of the previous wing. In this work, effects of the wing clapping, the wing corrugation, and the input wave form on the lift force generation have been also experimentally investigated. Finally, the vortex generated by the flapping device has been captured by a high speed camera, showing that vortices are produced during up- and down-strokes.

• Journal of Astronomy and Space Sciences
• /
• v.34 no.4
• /
• pp.343-352
• /
• 2017

A space plasma facility has been operated with a back-diffusion-type plasma source installed in a mid-sized vacuum chamber with a diameter of ~1.5 m located in Satellite Technology Research Center (SaTReC), Korea Advanced Institute of Science and Technology (KAIST). To generate plasma with a temperature and density similar to the ionospheric plasma, nickel wires coated with carbonate solution were used as filaments that emit thermal electrons, and the accelerated thermal electrons emitted from the heated wires collide with the neutral gas to form plasma inside the chamber. By using a disk-type Langmuir probe installed inside the vacuum chamber, the generation of plasma similar to the space environment was validated. The characteristics of the plasma according to the grid and plate anode voltages were investigated. The grid voltage of the plasma source is realized as a suitable parameter for manipulating the electron density, while the plate voltage is suitable for adjusting the electron temperature. A simple physical model based on the collision cross-section of electron impact on nitrogen molecule was established to explain the plasma generation mechanism.