• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.4
• /
• pp.325-336
• /
• 2013

FlashLinQ, one of the typical D2D communication systems developed by Qualcomm, considers a single-tone communication based distributed channel-aware link scheduling method to realize the link scheduling process with low control overheads. However, considering the frequency selective fading effect of practical multi-path channel, the single-tone based SIR estimation causes a critical scheduling error problem because the received single-tone signal has quite different channel gain at each sub-carrier location. In order to overcome this problem, we propose a novel link scheduling method based on CAZAC (Constant Amplitude Zero Auto-Correlation) sequence for D2D communication system. In the proposed method, each link has a unique offset value set for the generation of CAZAC sequences. CAZAC sequences with the cyclic offsets are transmitted using multiple sub-blocks in the entire bandwidth, and then each device can obtain nearly full-band SIR using a good cyclic cross-correlation property of CAZAC sequence.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.4
• /
• pp.304-312
• /
• 2008

Orthogonal codes like Walsh and Golay codes may have large correlation value when they are not synchronized, hence they are seldom used in asynchronous CDMA systems. Wysocki[1] showed that by multiplying the original Walsh-Hadamard matrix with an orthogonal transformation matrix the resultant matrix sustains orthogonality between row vectors and their cross-correlation can be reduced. Soberly and Wysocki[2] proposed similar scheme on Golay codes. This implies that using the proper orthogonal transformation cross-correlation of Walsh and Golay codes can be reduced, and the transformed codes can be used for user separation in the CDAM reverse link. In this paper we discuss cross-correlation related parameters which affect the performance of an asynchronous CDMA link, and we investigate the correlation properties of the transformed codes. When we designed orthogonal transformation matrices for Walsh and Golay codes, we minimized the maximum value of aperiodic cross-correlation of the codes ($ACC_{max}$) or the mean square value of the aperiodic cross-correlation($R_{cc}$) with preserving the orthogonality of the modified codes. We also evaluate the asynchronous CDMA system that uses the transformed Walsh and Golay codes.

• Korean Journal of Cognitive Science
• /
• v.10 no.1
• /
• pp.25-43
• /
• 1999

The focus of this study is on the elements of structure design that facilitate u user interaction with applications within cyberspace Structure design entails decisions regarding the optimal classification and hierarchical organization of information into s successively higher units. i.e .. the grouping of highly related information in the form of nodes of a site and the subsequent connection of nodes that are inter-related. The decisions are based on the designer's subjective classification framework. which is not always compatible with that of the user. We propose that the ensuing cognitive dissonance can be reduced via the employment of multiple hierarchies and cross-referencing links. Multiple hierarchies represent a single information space in terms of a number of single hierarchies. each of which represent a different perspective Cross-referencing refers to the inter-connection between the constituent hierarchies by providing a link to the alternate hierarchy for information that is most likely to be categorized in diverse manners by users with differing perspectives. In this study we conducted two empirical studies to gauge the effectiveness of multiple hierarchies and Cross-referencing links in the domain of cyber shopping malls. In the first phase. an experiment was conducted to determine how subjects classified given products with respect to two different perspectives for categorization. Experimental cyber malls were developed based on the results from the first phase to test the effectiveness of multiple hierarchies and cross-referencing links. Results show that the ease of navigation was higher for cyber malls that had implemented cross-referencing links are of greater value when used in conjunction with single hierarchical designs rather than multiple hierarchies. Users satisfaction with and ease of navigation was higher for cyber malls that had not implemented multiple hierarchies. This paper concludes with discussion of these results and their implications for designers of cyber malls.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.1
• /
• pp.301-309
• /
• 2004

An inorganic filling agent, ATH (alumina trihydrate) was used to induce inorganic-organic coupling by mixing with stearic acid, acryl silane, vinyl silane as surface treatment agents in order to apply as a high voltage insulating material. Volumetric resistivity was shown to vary with surface treatment agents, and the highest value was obtained in case of the mixture with vinyl silane. The dielectric breakdown intensity was shown to decrease gradually and saturate to a stable value, possibly due to the increase of cross link density in the vinyl radicals introduced to silica surface, resulting in stable dielectric breakdown intensity in the final stages. Tracking and flame retardant properties were also shown to be the best among the samples investigated in this study.

• Journal of the Korean Ceramic Society
• /
• v.41 no.9
• /
• pp.647-652
• /
• 2004

In aqueous tape casting of alumina slurry systems, the relationships between the suspension compositions and the defects of the dried tapes were discussed. The suspensions compositions were controlled with the ratios of the solids, water and organics binder contents. The effects of the thickness of dried tape and kinds of binder system were also examined. In the defect free region, the apparent viscosity showed nearly same value due to the count balancing effect of solid and organic binder content on the apparent viscosity. When water content was constant, increasing solid led to decrease of organic binder content. The defect free region was narrowed with increasing of casting thickness. When linear type acrylic emulsion binders system (D1000 and D 1035) were used, defect free zone formed the belt type in the triangle of solid, water and organic binder content according to the line of constant water contents. However the defect free region was not found in the cross-link type emulsion binder system (D 1050).

• Applied Microscopy
• /
• v.51
• /
• pp.20.1-20.12
• /
• 2021

We explored the link between mitochondrial biogenesis and mitochondrial morphology using transmission electron microscopy (TEM) in lymphoblasts of pediatric acute lymphoblastic leukemia (ALL) patients and compared these characteristics between tumors and control samples. Gene expression of mitochondrial biogenesis markers was analysed in 23 ALL patients and 18 controls and TEM for morphology analysis was done in 15 ALL patients and 9 healthy controls. The area occupied by mitochondria per cell and the cristae cross-sectional area was observed to be significantly higher in patients than in controls (p-value=0.0468 and p-value<0.0001, respectively). The mtDNA copy numbers, TFAM, POLG, and c-myc gene expression were significantly higher in ALL patients than controls (all p-values<0.01). Gene Expression of PGC-1α was higher in tumor samples. The analysis of the correlation between PGC-1α expression and morphology parameters i.e., both M/C ratio and cristae cross-sectional area revealed a positive trend (r=0.3, p=0.1). The increased area occupied by mitochondria and increased cristae area support the occurrence of cristae remodelling in ALL. These changes might reflect alterations in cristae dynamics to support the metabolic state of the cells by forming a more condensed network. Ultrastructural imaging can be useful for affirming changes occurring at a subcellular organellar level.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.191-199
• /
• 2008

In this paper, we present a performance analysis and design and implementation results of a 2.4 GHz bio-radar system that can detect human heartbeat and respiration signals. In order to design a 2.4 GHz bio-radar system qualitatively, we investigate the electromagnetic properties of human tissues and calculate the target SNR of demodulation output with respect to distance. The target SNR is defined by the 90 % success ratio for detecting heartbeat signal. With this target SNR value, the performance and link budget of the bio-radar system is simulated using MATLAB. Using this link budget results, the direct conversion receiver is designed and Implemented in 4 layer printed circuit board(PCB). With output power of 0 dBm and 5 Hz bandwidth, 80 % success ratio of 50 cm is measured. Measurement results show a good agreement with simulation results.

• Nutrition Research and Practice
• /
• v.3 no.2
• /
• pp.108-113
• /
• 2009

Taurine supplementation has been shown to have a beneficial effect on femur bone mineral content in ovariectomized rats. It therefore seemed desirable to find out whether the beneficial effect of taurine on ovariectomized rats fed calcium deficient diet could also be reproduced. Forty female Sprague-Dawley rats were divided into two groups, One group was OVX and the other group received sham operation (SHAM), and received either control diet or a taurine supplemented diet for 6 weeks. All rats were fed on calcium deficient diet (AIN-93: 50% level of calcium) and deionized water. Bone mineral density (BMD) and bone mineral content (BMC) were measured in spine and femur. The serum and urine concentrations of calcium and phosphorus were determined, Bone formation was measured by serum osteocalcin and alkaline phosphatase (ALP) concentrations, Bone resorption rate was measured by deoxypyridinoline (DPD) crosslinks immunoassay and corrected for creatinine. Urinary calcium and phosphorus excretion, osteocalcin in blood and cross link value were not significantly different among the groups. Within the OVX group, the taurine supplemented group had not higher femur bone mineral content than the control group. This study established the need for a study on the taurine effect on bone with different calcium levels.

• Tribology and Lubricants
• /
• v.37 no.1
• /
• pp.1-6
• /
• 2021

This paper presents the experimental results of hydrophobic surfaces developed using a stereolithography-based additive-manufacturing technique. The additive manufacturing technique can be used to manufacture objects with complex geometries from computer-aided design data. Several additive manufacturing methods, such as selective laser sintering, fused deposition modeling, stereolithography apparatus (SLA), and inkjet-based system, have been developed. The SLA is a form of three-dimensional printing technology used to create prototypes, patterns, and production parts in successive layers through photochemical processes. Light causes chemical monomers and oligomers to cross-link together to form objects composed of polymers. Moreover, this method is economical for fabricating surfaces with high output resolution and quality. Here, we fabricate various surfaces using different shapes using an SLA. The surfaces with micro-patterns are fabricated for 10 cases, including the biomimetic surface. The fabricated surfaces with various micro-patterns are evaluated for hydrophobicity performance based on the static contact angle. The contact angle is measured three times for each case, and the averaged value is used. The results indicate that the arrangements in a staggered structure have a larger contact angle than those in a line when the same micro-pattern is applied. Moreover, the mimetic surfaces exhibit more hydrophobic characteristics than those of artificial micro-patterns.

• Journal of Nutrition and Health
• /
• v.36 no.5
• /
• pp.452-458
• /
• 2003

Soybean is a rich source of isoflavones such as genistein and daidzein. Soy isoflavones have both weak estrogenic and anti-estrogenic effects and are structurally similar to tamoxifen, an agent that has an effect similar to that of estrogen in terms of reducing postmenopausal bone loss. The purpose of this study was to determine the effects of differences in protein source (casein vs soy) and isoflavone levels (reduced vs higher levels) on selected bone markers and hormones in growing male rats. Thirty weanling Sprague-Dawley young rats were divided into 3 groups: The control group was fed a casein-based diet, the soy concentrate group was fed soy protein with totally reduced isoflavones content (isoflavones 0.07 mg/g protein), and the soy isolate group was fed soy protein with a higher than normal isoflavones content (isoflavones 3.4 mg/g protein). The degree of bone formation was estimated by measuring serum osteocalcin and alkaline phosphoatase (ALP). By determining collagen cross-linkage by immunoassay and correcting with creatinine values, the bone resorption rate was compared. Serum osteocalcin, growth hormone, estrogen and calcitonin were analyzed using radio immunoassay kits. The bone formation marker and ALP activity were differentiated by protein source, showing higher values than casein in feeding either soy isolate or soy concentrate. In this study using growing rats, the differences in isoflavone contents were not a significant factor in either bone formation or bone reaborption markers. Moreover, the soy isolate group had significantly higher levels of growth hormone than the casein group. The findings of this study suggest that growth hormone is partially responsible for its bone-formation effects in young growing rats. Soy protein and the isoflavones in soy protein are beneficial for bone-formation in growing male rats. Therefore, exposure to soy protein and isoflavones early in life may have long-term health benefits in preventing bone diseases such as osteoporosis. Further study to evaluate the mechanism of action of isoflavones on bones is warranted. (Korean J Nutrition 36(5): 452∼458, 2003)