• Wind and Structures
• /
• 제4권1호
• /
• pp.45-62
• /
• 2001

This paper is focused on the torsional effects that are induced on bridge piers by unbalanced wind buffeting on the deck during double cantilever erection stages. The case of decks with variable cross section is considered in particular as this characteristic is typical of most frame bridges that are built by the cantilever method. The procedure outlined in the paper is basically an application of the method that Dyrbye and Hansen (1996) have illustrated for decks with constant cross section. This format was chosen because it is suitable for design purposes and may easily be implemented in structural codes. As a complement, the correspondence with the format that is adopted in the Canadian code (NBCC 1990) for the gust factor is established, which might be useful to bridge designers used to the North-American approach to the gust effects on structures. Only alongwind turbulence and horizontal movements of the deck are considered. The combination of torsional and bending effects is also discussed and it is illustrated with an example of application.

• 한국경영과학회지
• /
• 제10권1호
• /
• pp.65-78
• /
• 1985

In this paper, the approach getting a total demand by forecasting the new demand and the replacement demand separately and adding them is used for long term forecasting of durable goods. Cross country analysis using the income as an independent variable and S-shaped growth curve as a fitting model is developed as a method of forecasting new demand. To get the replacement demand the methods using the number of ownership and the replacement rate and the methods using the past demand and the distribution of the product life are proposed. And the theoretical explannation for product life cycle's diversity, which is the one of the major considerations in the long term forecasting, is attempted by the combination of the new demand and the replacement demand patterns. This is applicated the long term forecasting of Korean passenger cars.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.242.2-242.2
• /
• 2011

Molecularly imprinted polymer thin films were applied to develop a gas sensor based on the surface plasmon resonance phenomenon for small gaseous molecules such as toluene and xylene. The imprinted polymer films were synthesized via photo-polymerization method using various combination of templates, functional monomers and cross-linkers. The temperature of pre-polymerization solutions and the power of UV light were controlled for optimized performance of gas sensing. The morphology and porosity of the polymer films were controlled by varying the mixing ratios of the pre-polymerization solutions and confirmed by atomic force microscopy. By fitting the adsorption/desorption sensorgrams to conventional kinetic models, the effects of different templates and cross-linkers were interpreted in term of the structural differences of the polymer networks formed on the gold film. The sensitivity and selectivity of sensors were estimated for toluene and xylene, and also for humidity and other gaseous molecules such as formaldehyde and ammonia.

• Computers and Concrete
• /
• 제10권2호
• /
• pp.149-171
• /
• 2012

The problem of a concrete cross section under flexural and axial loading is indeterminate due to the existence of more unknowns than equations. Among the infinite solutions, it is possible to find the optimum, which is that of minimum reinforcement that satisfies certain design constraints (section ductility, minimum reinforcement area, etc.). This article proposes the automation of the optimum reinforcement calculation under any combination of flexural and axial loading. The procedure has been implemented in a program code that is attached in the Appendix. Conventional-strength or high-strength concrete may be chosen, minimum reinforcement area may be considered (it being possible to choose between the standards ACI 318 or Eurocode 2), and the neutral axis depth may be constrained in order to guarantee a certain sectional ductility. Some numerical examples are presented, drawing comparisons between the results obtained by ACI 318, EC 2 and the conventional method.

• International Journal of Ocean System Engineering
• /
• 제2권1호
• /
• pp.16-23
• /
• 2012

In this paper we discussed a new methodology for Urdu Character Recognition system using Dempster-Shafer theory which can powerfully estimate the similarity ratings between a recognized character and sampling characters in the character database. Recognition of character is done by five probability calculation methods such as (similarity, hamming, linear correlation, cross-correlation, nearest neighbor) with Dempster-Shafer theory of belief functions. The main objective of this paper is to Recognition of Urdu letters and numerals through five similarity and dissimilarity algorithms to find the similarity between the given image and the standard template in the character recognition system. In this paper we develop a method to combine the results of the different distance measurement methods using the Dempster-Shafer theory. This idea enables us to obtain a single precision result. It was observed that the combination of these results ultimately enhanced the success rate.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 춘계학술대회 논문집
• /
• pp.79-83
• /
• 1992

According to the variation of hydrostatic pressure on the central axis of deformable material, the V-shaped central bursting defect may be created on extrusion or drawing processes. The process factors whichaffect the generation of defects are die semi-angle, reduction ratio of cross-sectional area, friction factor, material properties and so on. The combination of these factors can determine the prossibility of defect creation and the shape of various round holes which have been created inside already. By the rigid plastic finite element method, this paper describes the observations of change in shape of a round hole with process conditions suchas die semi-angle, reduction ratio of cross-sectional area and friction factorat the unsteady state of axi-symmetrical extrusion process when the round hole is alreadyexisted inside the original billet, and also, the effects of process factors are investigated to prevent the possible defects.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권3호
• /
• pp.276-281
• /
• 2014

The electric power conversion system constructed by connecting two or more power converters in parallel is an advantageous method for making to large capacity and standardization. In this paper, the control method of cross current when three power converters are operated is examined, and it reexamined a preferable system construction method.

• 음성과학
• /
• 제8권1호
• /
• pp.93-111
• /
• 2001

This study investigates the contribution of vocalic information following the release of an initial stop to the identification of the three-way stop contrast (aspirated, lax, and tense) in Korean. Recent studies showed that there is a strong interaction between consonant types and tone. The findings raise questions concerning Korean listeners' use of tonal (or vocalic F0) variation in differentiation initial tense, lax, and aspirated stops. The above issues are addressed in the present study using a cross-splicing methodology. The overall results show that low vocalic F0 provided the most salient information for lax stops; tense and aspirated stop identification depended on a combination of VOT, F0, and H1-H2 characteristics. The perceptual dominance of F0 over VOT for lax stops is consistent with the size of the F0 difference in utterance-initial position, as well as their prominent role in Korean intonational phonology.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1993년도 봄 학술발표회논문집
• /
• pp.135-140
• /
• 1993

The optimum weight design of structure is to determine the combination of structural members which minimize the weight of structures and satisfy design conditions as well. Since most of loads and design variables considered in structural design have uncertain natures, the reliability-based optimization techniques need to be developed. The aim of this study is to estabilish the general algorithm for the minimum weight design of transmission tower structure system with reliability constraints. The sequential linear programming method is used to solve non-linear minimization problems, which converts original non-linear programming problems to sequential linear programming problems. The optimal solutions are produced for various reliability levels such as reliability levels inherent in current standard transmission tower cross-section and optimal transmission tower cross-section obtained with constraints of current design criteria as well as selected target reliability index. The optimal transmission towers satisfying reliability constraints sustain consistent reliability levels on all members. Consequently, more balanced optimum designs are accomplished with less structural weight than traditional designs dealing with deterministic design criteria.

• Restorative Dentistry and Endodontics
• /
• 제37권1호
• /
• pp.2-8
• /
• 2012

The limited durability of resin-dentin bonds severely compromises the longevity of composite resin restorations. Resin-dentin bond degradation might occur via degradation of water-rich and resin sparse collagen matrices by host-derived matrix metalloproteinases (MMPs). This review article provides overview of current knowledge of the role of MMPs in dentin matrix degradation and four experimental strategies for extending the longevity of resin-dentin bonds. They include: (1) the use of broadspectrum inhibitors of MMPs, (2) the use of cross-linking agents for silencing the activities of MMPs, (3) ethanol wet-bonding with hydrophobic resin, (4) biomimetic remineralization of water-filled collagen matrix. A combination of these strategies will be able to overcome the limitations in resin-dentin adhesion.