• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.2094-2099
• /
• 2004

An experimental study on heat transfer characteristics near the critical pressure has been performed with an internally-heated vertical annular channel cooled by R-134a fluid. Two series of tests have been completed: (a) steady-state critical heat flux (CHF) and (b) heat transfer tests for pressure reduction transients through the critical pressure. In the present experimental range, the steady-state CHF decreases with the increase of the system pressure For a fixed inlet mass flux and subcooling, the CHF falls sharply at about 3.8 MPa and shows a trend toward converging to zero as the pressure approaches the critical point of 4.059 MPa. The CHF phenomenon near the critical pressure does not lead to an abrupt temperature rise of the heated wall because the CHF occurred at remarkably low power levels. In the pressure reduction transient experiments, as soon as the pressure passed through the critical pressure, the wall temperatures rise rapidly up to a very high value due to the occurrence of the departure from nucleate boiling. The wall temperature reaches a maximum at the saturation point of the outlet temperature, then tends to decrease gradually.

• Nuclear Engineering and Technology
• /
• 제36권5호
• /
• pp.403-414
• /
• 2004

An experimental study of heat transfer characteristics near the critical pressure has been performed with an internally-heated vertical annular channel cooled by R-134a fluid. Two series of tests have been completed: (a) steady-state critical heat flux (CHF) tests, and (b) heat transfer tests for pressure reduction transients through the critical pressure. In the present experimental range, the steady-state CHF decreases with increase of the system pressure for fixed inlet mass flux and subcooling. The CHF falls sharply at about 3.8 MPa and shows a trend towards converging to zero as the pressure approaches the critical point of 4.059 MPa. The CHF phenomenon near the critical pressure does not lead to an abrupt temperature rise of the heated wall, because the CHF occurs at remarkably low power levels. In the pressure reduction transients, as soon as the pressure passes below the critical pressure from the supercritical pressure, the wall temperatures rise rapidly up to very high values due to the departure from nucleate boiling. The wall temperature reaches a maximum at the saturation point of the outlet temperature, and then tends to decrease gradually.

• 천문학회지
• /
• 제38권2호
• /
• pp.279-282
• /
• 2005

We report the millimeter-wave radio observations of molecular cloud cores in Taurus. The observed line is the $N_2H^+$ emission at 93 GHz, which is known to be less affected by molecular depletion. We have compared starless (IRAS-less) cores with star-forming cores. We found that there is no large difference between starless and star-forming cores, in core radius, linewidth, core mass, and radial intensity profile. Our result is in contrast with the result obtained by using a popular molecular line, in which starless cores are larger and less condensed. We suggest that different results mainly come from whether the employed molecular line is affected by depletion or not. We made a virial analysis, and found that both starless and star-forming cores are not far from the critical equilibrium state, in Taurus. Together with the fact that Taurus cores are almost thermally supported, we conclude that starless Taurus cores evolve to star formation without dissipating turbulence. The critical equilibrium state in the virial analysis corresponds to the critical Bonnor-Ebert sphere in the Bonnor-Ebert analysis (Nakano 1998). It is suggested that the initial condition of the molecular cloud cores/globules for star formation is close to the critical equilibrium state/critical Bonnor-Ebert sphere, in the low-mass star forming region.

• Journal of Power Electronics
• /
• 제10권2호
• /
• pp.132-137
• /
• 2010

Interleaving techniques are widely used to reduce input/output ripples and to increase the power capacity of boost converters operating in critical conduction mode. Two types of phase-shift control schemes are studied in this paper, the turn-on time shifting method and the turn-off time shifting method. It is found that although the turn-off time shifting method exhibits better performance, it suffers from sub-harmonic oscillations at high input voltages. To solve this problem, an intensive quantitative analysis of the sub-harmonic oscillation phenomenon is made in this paper. Based upon that, a novel modified turn off time shifting control scheme for interleaved boost converters operating in critical conduction mode is proposed. An important advantage of this scheme is that both the master phase and the slave phase can operate stably in critical conduction mode without any oscillations in the full input voltage range. This method is implemented with a FPGA based digital PWM control platform, and tests were carried out on a two-phase interleaved boost PFC converter prototype. Experimental results demonstrated the feasibility and performance of the proposed phase-shift control scheme.

• Nuclear Engineering and Technology
• /
• 제34권4호
• /
• pp.382-395
• /
• 2002

An experimental study on transient critical heat flux (CHF) under flow coastdown has been performed for the water flow in a non-uniformly heated vertical annulus under low flow and a wide range of pressure conditions. The objectives of this study are to systematically investigate the effect of the flow transient on the CHF and to compare the transient CHF with steady-state CHF The transient CHF experiments have been performed for three kinds of flow transient modes based on the coastdown data of a nuclear power plant reactor coolant pump. At the same inlet subcooling, system pressure and heat flux, the effect of the initial mass flux on the critical mass flux can be negligible. However, the effect of the initial mass flux on the time-to- CHF becomes large as the heat flux decreases. The critical mass flux has the largest value for slow flow reduction rate. There is a pressure effect on the ratio of the transient CHF data to steady-state CHF data. Except under low system pressure conditions, the flow transient CHF was revealed to be conservative compared with the steady-state CHF data. Bowling CHF correlation and thermal hydraulic system code MARS show promising results for the prediction of CHF occurrence .

• 한국지능시스템학회논문지
• /
• 제22권1호
• /
• pp.49-55
• /
• 2012

전역 클럭 없이 외부 입력에 따라서 값이 변하는 비동기 카운터는 우주용 메모리 등 현대 디지털 시스템에서 널리 사용된다. 본 논문에서는 우주 방사능 누적에 기인하는 크리티컬 레이스 고장이 존재하는 비동기 카운터를 위한 고장 극복 기법을 제안한다. 크리티컬 레이스는 비동기 디지털 회로 설계 과정에서 발생하는 대표적인 고장으로서 회로의 다음 안정 상태가 고정되지 않고 여러 값 중 하나로 나오는 비결정적인 특성을 보인다. 이번 연구에서는 비동기 순차 머신에 대한 교정 제어 기법을 이용하여 크리티컬 레이스를 극복할 수 있는 상태 피드백 제어기의 설계 과정을 제시한다. 또한 비동기 카운터 교정 제어 시스템을 VHDL 코드로 구현하고 실험을 통하여 제안된 제어 시스템이 크리티컬 레이스 고장을 극복하는 과정을 예시한다.

• 정보화연구
• /
• 제9권4호
• /
• pp.443-453
• /
• 2012

다양한 분야의 시스템들은 시스템 오류에 인한 피해의 최소화를 목적으로 안전필수 특성을 가지도록 요구된다. 본 논문에서, 안전필수 시스템으로 많이 연구되는 사이버물리시스템이 그 특성을 가지기위해 고려해야하는 이슈와 주요 요소인 시간을 기반으로 모델 지향 아키텍처에 대하여 논의한다. 메타모델링 접근 방식으로 마감시간, 전환상태와 기준치에 연결하여 시간 기반 아키텍처를 제시하고, 이를 모델지향 아키텍처를 이용하여 설계한다. 메타모델로부터 생성된 안전처리 모델과 함께 오류처리 컴포넌트를 사용하여 사이버 물리 시스템 및 시간기반 도메인에 적용 가능한 안전필수 아키텍처를 제시한다. 그리고 안전필수 시스템 설계 시 기본적 안전처리 상태, 다중적 상태, 복합적 상태를 통하여 세부적인 모델과 그 사례를 나타내었다.

• 한국응용과학기술학회지
• /
• 제20권1호
• /
• pp.51-56
• /
• 2003

Garlic extract using super-critical carbon dioxide is influenced by temperature and pressure, and the optimum condition can make under super-critical state. We can know the defects in process of super-critical extration, It can indicate the drop of product rate, energy loss and equipment expense etcs. The minimum inhibition concentration of microbe which garlic extract contains has apperared the concentration more than 800ppm in this experiment. According to the result of this experiment, we can know that the antibiosis effect in the microbe of staphylococcus and fungus has disappeared in the incubation time more than 12 hours.

• 한국산학기술학회논문지
• /
• 제8권3호
• /
• pp.615-619
• /
• 2007

본 연구에서는 한계상태이론에 기초하며 비교적 적은 매개변수를 활용하도록 최근에 개발된 Hvorslev-MCC 모델 및 전통적 MCC 모델의 거동예측 능력을 엄격하게 수행된 삼축압축시험 결과와 비교하여 고찰하였다. 모델예측 결과의 차이는 과압밀점토 시료에서 주로 발생하였다. Hvorslev-MCC 모델은 과압밀점토 시료의 첨두강도를 매우 정확히 예측하였으며, 이는 한계상태 건조 측의 항복면에 단순 타원이 아닌 Hvorslev 면을 활용하였기 때문이다.

• Bulletin of the Korean Chemical Society
• /
• 제7권3호
• /
• pp.224-228
• /
• 1986

A nonlinear theory is presented for the fluctuations of intermediates in the Brusselator near the critical point caused by diffusion. The method used is the two time scaling method different from the conventional method in the sense that a slight nonlinear effect is included in the initial time region where the linear approximation is conventionally valid. The result obtained by the nonlinear theory shows that fluctuations close to the critical point approach the value of a stable steady state or deviate infinitely from an unstable steady state, as time goes to infinity, while the linear theory gives approximately time-independent fluctuations. A brief discussion is given for the correlation at a time between fluctuating intermediates when the system approaches a stable steady state.