• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.3
• /
• pp.37-42
• /
• 2022

Recently, the semiconductor package structures are becoming thinner and more complex. As the thickness decrease, interfacial delamination due to material mismatch can be further maximized, so the reliability of interface is a critical issue in industry field. Especially, the polymers, which are widely used in semiconductor packaging, are significantly affected by the temperature and moisture. Therefore, in this study, the delamination prediction at the interface of package structure was performed through finite element analysis considering the moisture absorption and desorption under the various temperature conditions. The material properties such as diffusivity and saturated moisture content were obtained from moisture absorption test. The hygro-swelling coefficients of each material were analyzed through TMA and TGA after the moisture absorption. The micro-shear test was conducted to evaluate the adhesion strength of each interface at various temperatures considering the moisture effect. The finite element analysis of interfacial delamination was performed that considers both deformation due to temperature and moisture absorption. Consequently, the interfacial delamination was successfully predicted in consideration of the in-situ moisture desorption and temperature behavior during the reflow process.

• The Journal of Engineering Geology
• /
• v.26 no.2
• /
• pp.251-260
• /
• 2016

Groundwater flow due to hydraulic gradients across a geologic barrier surrounding a dam reservoir can cause swamps or wetlands to form on the downstream side of the dam, thereby restricting land use. The difference in head between the reservoir level and the downstream groundwater level creates a hydraulic gradient, allowing water to flow through the geologic barrier. We constructed a drainage system at the Daecheong dam to study the effects on groundwater levels and soil moisture contents. The drainage system consisted of a buried screened pipe spanning a depth of 1-1.5 m below a land surface. Groundwater levels were monitored at several monitoring wells before and after the drainage system was installed. Most well sites recorded a decline in groundwater level on the order of 1 m. The high-elevated site (monitoring well W1) close to the reservoir showed a significant decline in groundwater level of more than 2 m, likely due to rapid discharge by the drainage system. Soil moisture contents were also analyzed and found to have decreased after the installation of the drainage system, even considering standard deviations in the soil moisture contents. We conclude that the drainage system effectively lowered groundwater levels on the downstream side of the dam. Furthermore, we emphasize that water seepage analyses are critical to embankment dam design and construction, especially in areas where downstream land use is of interest.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.6
• /
• pp.445-453
• /
• 2012

In this study the effects of particle size and water content on the yields and physical/chemical properties of pyrolytic products were investigated through fast-pyrolysis of yellow poplar. Water content was critical parameters influencing the properties of bio-oil. The yields of bio-oil were increased with decreasing water content. However, the yield of pyrolytic product was not clearly influenced by feedstock's particle size. The water content, pH and HHV (Higher Heating Value) of bio-oil were measured to 20~30%, 2.2~2.4 and 16.6~18.5MJ/kg, respectively. The water content of feedstock was clearly influenced to water content of bio-oil. In terms of bio-char, HHV of them were measured to 26.2~30.1 MJ/kg with high content of carbon over 80%.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.26 no.1
• /
• pp.41-46
• /
• 2020

PCR PET flake's market endeavors difficult situations of its oversupply and decreasing demands in South Korea. Since China banned the import of most recycled plastics, flake producers who mostly export the flakes lost their biggest market. The producers struggled to survive in the competitions with PCR PET flake from EU and 3^rd countries but it was challenging due to substandard quality and increasing cost. Attempts to improve the quality of PCR PET flake have been made but they were only an individual company's efforts. The objective of this study was to understand the market status on PCR PET flake in South Korea and to present suggestions for improving its quality. The results of the questionnaires targeted to flake producers showed that no testing methods on PCR PET flake were standardized and there were critical factors to the quality such as moisture content, contaminants, and viscosity. Case studies of US, Japan and other countries had been done especially about testing methods and 76 samples from 21 companies were tested according to those methods. Based on the results, the final factors were decided as contaminants, moisture content, alkalinity index and intrinsic viscosity. There is a plan to standardize testing methods and they could be guidelines to improve the business competitiveness of PCR PET flake in South Korea.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04b
• /
• pp.227-231
• /
• 1999

Condebelt drying provides opportunities not only of improving the strength properties and saving of drying energy but also of reducing the basis weight or increasing the utilization of recycled furnishes. In this paper general overview of the Condebelt press drying will be described and the effects of the process variables in Condebelt press drying including drying temperature, pressure, drying time and moisture content of the sheets on the paper properties is discussed. The experiment was performed with a static rig and Korean OCC was used as a principal raw material. Significant improvement in sheet density, compression strength, tensile strength, surface smoothness, etc. was obtained when Condebelt drying was applied. Control of pressure and inlet dryness was found to be very critical in improving sheet properties. Mill experiences from Dong Il Paper Mfg. Co., Ltd is briefly described.

• Computers and Concrete
• /
• v.18 no.6
• /
• pp.1097-1112
• /
• 2016

Fire loading causes a critical collapse of RC (Reinforced Concrete) Structures since the embedded steels inside are relative week against high elevated temperature. Several numerical frameworks for fire resistance have been proposed, however they have limitations such as unstable convergence and long calculation period. In the work, 2-D nonlinear FE technique is proposed using Galerkin method for RC structures under fire loading. Closed-form element stiffness with a triangular element is adopted and verified with fire test on three RC slabs with different fire loading conditions. Several simulations are also performed considering fire loading conditions, water contents, and cover depth. The proposed numerical technique can handle time-dependent fire loading, convection, radiation, and material properties. The proposed technique can be improved through early-aged concrete behavior like moisture transport which varies with external temperature.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.3
• /
• pp.566-571
• /
• 1999

Effects of storage temperature at 18oC and 5oC for 9 days and heating conditions on textural char acteristics in strong wheat flour gels were investigated using a Instron after microwave (2450MHz, 700W). Heating condition did not affect the texture property in the wheat flour gels, but the frozen storage was very effective to prevent the hardening of the samples. Hardness, adhesiveness, and gumminess in the wheat flour gels decreased in increasing moisture content from 45% to 55%, but there was little change in cohesiveness. The storage at room temperature for 2 hours resulted in increased hardness in the heated wheat flour gels. PE wrap package of the wheat flour gels prevented weight loss by 3~6% and hardening effectively. Sugar, or sugar and shotening resulted in increased hardness in loaf bread. The hardness and weight loss in loaf breads were markedly changed by the heating time with microwave. The most critical time point was around 4 minutes following the heating.

• Korean Journal of Food Science and Technology
• /
• v.33 no.6
• /
• pp.686-692
• /
• 2001

The effects of extrusion on solubilization of brown rice, glutinuous rice, barley and job's tear were analyzed by response surface methodology (RSM). Solubilization of whole grains by extrusion was characterized in terms of water solubility index (WSI), concentration of water soluble polysaccharides (C) and intrinsic viscosity $([\eta])$. Considering both concentration and intrinsic viscosity, a dimensionless target parameter $([\eta])$ was also included for analysing the extrusion effects on cereal extrusion. Response surface methodology analysis showed that the moisture content was the most significant contributor among screw speed, temperature and moisture content affecting the solubilizing phenomena of cereals processed with extrusion. Brown rice was not showed the significant relationship on $([\eta])$ because $([\eta])$ was more affected by intrinsic viscosity. The critical point of whole grains extrusion except brown rice was corresponded to screw speed of 300 rpm, moisture content of 20% and temperature of $120^{\circ}C$.

• Korean journal of applied entomology
• /
• v.42 no.2
• /
• pp.145-152
• /
• 2003

Field application of the entomopathogenic nematode, Steinernema carpncapsae, is limited by its susceptibility to UV irradiation and desiccation especially at leaf spray control. This study was conducted to develop the control technique using alginate biocapsulation of the nematodes against the beet armyworm, Spodoprera exigua and the tobacco cutworm, Sp. litura that are normally infesting hosts above ground level. The alginate capsules including infective juveniles gave significant feeding toxicities to the larvae of the two lepidopteran species. The lethality followed a typical sigmoid dose-mortality pattern with increase of the nematode densities embedded in the capsules. Moisture content in the capsule was critical to the survival of the infective juveniles. More than 80% nematodes could survive above 10% moisture content remained in the capsule. Remaining moisture content within the capsule was dependent on relative humidity, ambient temperature, and capsule size, but not on citric acid reaction time during capsule formation. More than 80% of infective juveniles in the alginate capsules could survive in distilled water at 15$^{\circ}C$ for 60 days. When these nematode capsules containing welsh onion extract as another phagostimulant were applied on the 3rd instar larvae of Sp. exigua infesting peanut plants, they resulted in about 90% control efficacy. These results indicate that the alginate capsulation can be used for leaf-spray agent of the entomopathogenic nematodes as well as for improved storage purpose.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.3
• /
• pp.51-63
• /
• 1999

The effects of high filler loading technique on the reliability of epoxy molding compound (EMC) as a microelectronic encapsulant was investigated. The method of high filler loading was established by the improvement of maximum packing fraction using the simplified packing model proposed by Ouchiyama, et al. With the maximum packing fraction of filler, the viscosity of EMC wart lowered and the flowability was improved. As the amount of filler in EMC increased, several properties such as internal stress and moisture absorption were improved. However, the adhesive strength with the alloy 42 leadframe decreased when the filler content was beyond the critical value. It was found that the appropriate content of filler was important to improve the reilability of EMC, and the optimum filler combination should be selected to obtain high reliable EMC filled with high volume fraction of filler.