• 한국비블리아학회지
• /
• 제25권2호
• /
• pp.77-95
• /
• 2014

본 연구의 목적은 교류분석이론에서 제시한 이고그램(egogram)을 통해서 사서교사의 자아 상태 유형을 분석하는 것이다. 교사의 바람직한 자아 상태는 A(Adult)와 NP(Nurturing Parent) 그리고 FC(Free Child)가 CP(Critical Parent)나 AC(Adapted Child)보다 높은 것이다. 그러나 사서교사는 CP가 높고 A와 FC가 낮게 나타났다. 이것은 사서교사가 자신의 가치관과 신념을 바른 것이라고 여기고 있음을 의미한다. 또한 양보하려 하지 않고 규칙과 규범을 강조하는 완고한 태도를 가지고 있다고도 볼 수 있다. 이러한 사서교사의 자아 상태는 학생의 자주적 학습을 강조하는 구성주의 학습 환경에서 교수자로서의 역할 수행에 걸림돌이 될 수 있다. 따라서 사서교사 양성과정에서 교수자는 물론 교수 파트너로서의 역량을 기를 수 있도록 교육정보봉사 영역과 교육용 콘텐츠 및 수업용 자료 개발 프로그램을 강화할 필요가 있다.

• 대한화학회지
• /
• 제53권5호
• /
• pp.491-498
• /
• 2009

25 ${^{\circ}C}$의 순수 물 및 n-부탄올 수용액에서 음이온성 계면활성제인 DBS (sodium dodecylbenzenesulfonate)와 비이온성 계면활성제인 Brij 30 (polyoxyethylene(4) lauryl ether)과 Brij 35 (polyoxyethylene(23)lauryl ether)의 혼합미셀화에 대한 임계미셀농도(CMC)와 반대이온의 결합상수값(B)을 DBS의 겉보기몰분율($\alpha$1)의 함수로서 전도도법으로 측정하였다. 이와 같이 측정한 CMC값에 비이상적 혼합미셀화모델을 적용함으로써 여러 가지 열역학적 함수값(Xi, $\gamma$i, Ci, aiM, $\beta$ 및 ${\Delta}H_{mix}$)들을 계산하여 상호 비교분석하였다. 그 결과, DBS는 Brij 30보다는 Brij 35와 더욱 강한 결합을 이루었으며 이상적 혼합미셀화로부터 더욱 큰 음의 벗어남을 보였다.

• 대한화학회지
• /
• 제48권3호
• /
• pp.236-242
• /
• 2004

25$^{\circ}C$의 순수 물 및 n-부탄올 수용액에서 Dodecylpyridinium chloride(DPC)와 Cetyldimethylethylammonium bromide(CDEAB)의 혼합계면활성제가 나타내는 임계마이셀농도(CMC)와 반대이온결합상수(B)값을 DPC의 겉보기몰분율(${\alpha}_1$)에 따른 변화를 전도도법으로 측정하였다. 이와같이 측정한 CMC값에 비이상적 혼합마이셀화모델을 적용함으로써 여러 가지 열역학적 함수값(($X_i,\;{\gamma}_i,\;C_i,\;a^M_i,\;{\beta},\;and\;{\Delta}H_{mix})$들을 계산하고 분석하였다. 그리고 DPC/CDEAB 혼합계면활성제의 마이셀화에 미치는 n-부탄올의 효과를 조사하기 위하여 n-부탄올의 농도에 따른 열역학 함수값(CMC, B 및 ${\Delta}G_o\;^m$)의 변화를 측정하고 분석하였다.

• Nuclear Engineering and Technology
• /
• 제26권2호
• /
• pp.212-224
• /
• 1994

원형도관내의 비점성유동장에 놓인 동심인 유연성 실린더의 안정성을 분석하기 위하여 수치해석적방법이 개발되었다. 진동하는 실린더에 작용하는 비정상·비점성 유체유발력을 스펙트럼 배치방법을 사용하여 지배방정식을 단순화시키지 않음으로서 더 정밀하게 예측하였다. 본 수치해석이론은 기존의 퍼텐샬이론과 비해 비교적 넓은 환의 경우와 짧은 실린더의 경우에도 적용할 수 있다. 비점성유동의 지배방정식은 라플라스방정식으로부터 구하였다. 유체유동과 결부된 실린더의 유동방정식은 갤러킨의 방법에 의하여 불연속방정식으로 표시되며 이로부터 계의 운동특성을 검토하였다. 계가 좌굴현상에 의하여 안정성을 잃는 임계유속에 대한 환의 간격과 실린더의 길이의 영향이 검토되었다. 수치해석방법을 입증하기 위하여 얇은 막 근사이론에 근거를 두고 호프슨이 제안한 퍼텐샬이론을 개선하였다. 계의 안정성과 동적특성을 수치해석방법에 의하여 예시하였고 기존의 이론과 본 연구에서 제안된 근사법으로 구한 결과와 비교하여 잘 일치함을 보였다. 무차원화된 임계유속은 환의 간격이 넓을수록 실린더의 길이 가 짧을수록 증가함을 보였다.

• 환경영향평가
• /
• 제21권1호
• /
• pp.71-80
• /
• 2012

Against the backdrop of the clear impact of climate change, it has become essential to analyze the influence of climate change and relevant vulnerabilities. This research involved evaluating the impact of heat waves in Seoul, from among many local autonomous bodies that are responsible for implementing measures on adapting to climate change. To carry out the evaluation, the A1B scenario was used to forecast future temperature levels. Future climate scenario results were downscaled to $1km{\times}1km$ to result in the incorporation of regional characteristics. In assessing the influence of heat waves on people-especially the excess mortality-we analyzed critical temperature levels that affect excess mortality and came up with the excess mortality. Results of this evaluation on the impact of climate change and vulnerabilities indicate that the number of days on which the daily average temperature reaches $28.1^{\circ}C$-the critical temperature for excess mortality-in Seoul will sharply increase in the 2050s and 2090s. The highest level of impact will be in the month of August. The most affected areas in the summer will be Songpa-gu, Gangnam-gu, and Yeongdeungpo-gu. These areas have a high concentration of residences which means that heat island effects are one of the reasons for the high level of impact. The excess mortality from heat waves is expected to be at least five times the current figure in 2090. Adaptation plan needs to be made on drawing up long-term adaptation measures as well as implementing short-term measures to minimize or adapt the impact of climate change.

• Progress in Superconductivity
• /
• 제14권1호
• /
• pp.1-10
• /
• 2012

We fabricated a closed coils by using resistive-joint method and the joint resistance of the coils were estimated by field decay technique in liquid nitrogen. We used the Runge-kutta method for the numerical analysis to calculate the decay properties. The closed coil was wound by $(Bi,Pb)_2Sr_2Ca_2Cu_3O_x$/Ag tape. Both ends the tape were overlapped and soldered to each other. The current was induced in a closed coils by external magnetic flux density. Its decay characteristic was observed by means of measuring the magnetic flux density generated by induced current at the center of the closed coil with hall sensor. The joint resistance was calculated as the ratio of the inductance of the loop to the time constants. The joint resistances were evaluated as a function of critical current of loop, contact length, sweep time, and external magnetic flux density in a contact length of 7 cm. It was observed that joint resistance was dependent on contact length of a closed coil, but independent of critical current, sweep time, and external magnetic flux density. The joint resistance was measured to be higher for a standard four-probe method, compared with that for the field decay technique. This implies that noise of measurement in a standard four-probe method is larger than that of field decay technique. It was estimated that joint resistance was $8.0{\times}10^{-9}{\Omega}$ to $11.4{\times}10^{-9}{\Omega}$ for coils of contact length for 7 cm. It was found that 40Pb/60Sn solder are unsuitable for persistent mode.

• Journal of Trauma and Injury
• /
• 제21권1호
• /
• pp.1-7
• /
• 2008

When man first walked on this planet, injury must have been a close encounter of the first kind. The outbreak of World War I, during a period of rapid scientific growth in the basic sciences, demonstrated the need to develop better methods of care for the wounded, methods that were later applicable to the civilian population. Trauma is a multisystem disease and, as such, benefits from almost any advance in medical science. As we learn more about the physiology and the biochemistry of various organ systems, we can provide better management for trauma victims. Improved imaging techniques, better appreciation of physiologic tolerance, and increased understanding of the side effects of specific surgical procedures have combined to reduce operative intervention as a component of trauma patient care. On the other hand, because of this rapid development of medical science, only a few doctors still have the ability to treat multisystem injuries because almost doctor has his or her specialty, which means a doctor tends to see only patients with diagnoses in the doctor's specialty. Trauma Surgeons are physicians who have completed the typical general surgery residency and who usually continue with a one to two year fellowship leading to additional board certification in Surgical Critical Care. It is important to note that trauma surgeons do not need to do all kinds of operations, such as neurosurgery and orthopedic surgery. Trauma surgeons are not only a surgeon but also general medical practitioners who are very good at critical care and coordination of patient. In order to achieve the best patient outcomes, trauma surgeons should be involved in prehospital Emergency Medical Services, the Trauma Resuscitation Room, the Operating Room, the Surgical Intensive Care and Trauma Unit, the Trauma Ward, the Rehabilitation Department, and the Trauma Outpatient Clinic. In conclusion, according to worldwide experience and research, the trauma surgeon is the key factor in the trauma care system, so the trauma surgeon should receive strong support to accomplish his or her role successfully.

• International Journal of Ocean System Engineering
• /
• 제2권2호
• /
• pp.106-115
• /
• 2012

In the present study, TiN and CrN films were coated by arc ion plating equipment onto aluminum alloy substrate, A2024. The film thickness was about 4.65 ${\mu}m$. TiN and CrN films were analyzed by X-ray diffraction and energy dispersive X-ray equipments. The Young's modulus and the micro-Vickers hardness of aluminum substrate were modified by the ceramic film coatings. The difference in Young's modulus between substrate and coating film would affect on the wear resistance. The critical load, Lc, was 75.8 N for TiN and 85.5 N for CrN. It indicated from the observation of optical micrographs for TiN and CrN films that lots of cracks widely propagated toward the both sides of scratch track in the early stage of MODE I. TiN film began to delaminate completely at MODE II stage. The substrate was finally glittered at MODE III stage. For CrN film, a few crack can be observed at MODE I stage. The delamination of film was not still occurred at MODE II and then was happened at MODE III. This agrees with critical load measurement which the adhesive strength was greater for CrN film than for TiN film. Consequently, it was difficult for CrN to delaminate because the adhesive strength was excellent against Al substrate. The wear process, which the film adheres and the ball transfers, could be enhanced because of the increase in loading. The wear weight of ball was less for CrN than for TiN. This means that the wear damage of ball was greater for TiN than for CrN film. It is also obvious that it was difficult to delaminate because the CrN coating film has high toughness. The coefficient of friction was less for CrN coating film than for TiN film.

• 한국산학기술학회논문지
• /
• 제20권3호
• /
• pp.366-376
• /
• 2019

2017년 청년 실업률이 역대 최고치를 기록한 가운데, 본 상황을 타파하기 위한 대안으로 창업 활성화가 떠오르고 있다. 벤처 기업 수 및 신규 벤처 투자 금액은 매년 역대 치를 갱신하고 있으며 정부에서는 중소기업청을 중소벤처기업부로 격상시켰다. 문제는 스타트업의 성공률이 높지 않다는 데 있다. 한국 신생기업 생존율은 최근 3년 39.1%에 불과하며, 죽음의 계곡(Valley of Death) 단계에서 90%에 달하는 기업들이 실패하고 있다. 초기 스타트업은 죽음의 계곡을 넘어갈 수 있느냐가 관건이며 이를 위해 투자가 어느 정도 규모와 적시성을 가지고 이루어지느냐가 중요한 변수로 작용한다. 하지만, 현재 스타트업의 비즈니스 모델을 정립하기 위한 모델들은 투자 시 실질적인 기업 평가 변수가 반영되어 있지 않아 투자 유치에 어려움이 있다. 본 논문에서는 주요 투자 주체인 엔젤투자기관 및 벤처캐피탈이 투자를 위해 중점적으로 고려하는 변수 및 비즈니스 모델이 혼합된 프로세스를 개발했다. 또한, 새로 개발한 Death Valley Venture(DVV) 비즈니스 프로세스를 기존의 기법들과 비교하고, 적용 사례를 제시하였다.

• 교육철학
• /
• 제60호
• /
• pp.93-116
• /
• 2016

In this research we analyze Sun Wen's revolution education from the perspective of chinese nationalism. Sun Wen instigated the revolution of 1911 and established the first Chinese republican government; his "three people's principles" played an important role in modern Chinese politics. Sun Wen tried to remind the people and make them conscious of their sovereignty through education. Critical of then-the feudalistic education, Sun Wen incorporated Western-modern education in to his philosophy of education, which then provided theoretical framework of the Chinese revolution. At the core of it was the so-called "advanced education", based on Chinese nationalism, which encourages people to fight for independence as well as national prosperity and defense. The advanced education consisted of "proclaim education" and "constructive education". The proclaim education was a means of disseminating revolutionary ideas through an armed struggle against Ching dynasty; the goal was to encourage people to participate actively. Constructive education could be divided into two periods, namely the period of pre-republic of China and post-republic of China; the aim and process of education in the former period was to "wipe out" the Manchu people of the Qing dynasty while in the latter, to build a country predicated on Chinese nationalism, which was hostile towards the Qing dynasty and any other thoughts that do not accord with it. The main purpose of revolution education was to inspire Sinocentrism and to solidify the country of the Chinese people. Ultimately, Sun Wen's philosophy of revolution education provided foundation for the construction of a country of the Chinese people in which inspirational writing for the welfare of the people, loyalty to country, and public service are realized.