• Fire Science and Engineering
• /
• v.22 no.1
• /
• pp.99-104
• /
• 2008

It is important to understand thermal characteristic as a method to estimate the new materials, because spontaneous ignition characterized by causing combustion in the low temperature without ignition source. If can not find out the thermal characteristics of materials, it is frequent that causes of fires could not be found. The danger level of spontaneous ignition material should be estimated and by closely studying its thermal characteristic. However, RPF(Refuse Paper & Plastic Fuel) is a solid matter and getting increasesa year by year because it is an economy profit as alternative energy for limited fossil fuels. Some time RPF occur a fire in the cases of its production process and conservation. Therefore study for thermal stability and critical ignition temperature of RPF was so imperative that the experiment by means of Bombe Calorimeter, TG-DTA, MS80, SIT-II, and Wire Basket Test was implemented. As a result, RPF had a caloric value 26.4-28.3 MJ/kg, and its initial pyrolysis temperature was $192^{\circ}C$ at heating rate 2 K/min. With the result of analysis by MS 80 which is an instrument measuring microscopic calory, pure RPF not containing water has higher caloric value than RPF containing 20% water. Also, SIT-II which is an instrument of insulated auto-ignition was ignited by $118.5^{\circ}C$. This temperature is lower than that of Wire Basket Test. The critical ignition temperature was calculated by Frank-Kamenetskii equation can cause ignition at $80^{\circ}C$ when conserved in the height of 10 m by the standard of infinity slab.

• Journal of Korean Academy of Nursing
• /
• v.29 no.2
• /
• pp.336-345
• /
• 1999

This study looks at the various alternative therapy methods used in day to day life by elderly, over 60 years of age. The elderly have come to know and practice these methods for the following reasons it is good for the health ; it is the method used in the of fen days when there wesn't modern medicine ; it has been passed down from generations ; it can be done at home without having the need to go to the hospital ; acupuncture or poulticing can be used ; it can be done at home, which was an important factor in rural areas where hospitals are few and far between ; and 〔herbal〕 medicine could be prepared at home at no cost ; it derives from experience ; it is impossible to ignore tradition passed down through the generations. Diet control and plants (herbs) are methods most often used. as they are easy to find and can be readily used in critical situations. Other methods include oriental medicine practices of moxibustion with moxa cone, negative therapy, hand and finger acupunture, finger press method. ordinary acupunture, manual healing methods of massage. diaphoretic therapy and meditation to reach a state of calm, and qigong dirigation. The reasons for its use are as follows ; it has been used before ; it is effective ; there is some improvement after the treatment ; it is not harmful to the body ; medicine cannot be obtained and it is the only thing available ; it is not good for an old person to go to the hospital everyday. the symptoms are not serious enough to go to a hospital : and acupuncture is for these things. The means that the elderly have come to practice these methods are : it has been used since the past ; it has been told by the elders ; they have been told by friends ; it was part of their knowledge ; and they have come to know by watching their mother. Further, to regain vitality lost through old age, the elderly have relied on hot soup. a hearty meal. brewed honey water, pumpkin, or ginseng. Humans, by instinct. would rub or massage the areas that caused pain. These actions, combined with a breathing technique have been recognized in Tong-Eui-Bo-Gam(the essential of eastern medicine), the complete work of early modern medicine, are a useful means to revive chi(기). This knowledge is thought to have greatly affected our heathy lifestyle. Furthermore, though the demand for medical services would increase with age, the elderly have not always been able to tend to their needs at the hospital for reasons economic or other. Hence, these alternative therapy methods seem to have been practiced as a temporary means of relief. The excellence of our traditional therapeutic custom has not received full recognition due to the argument relating to its scientific merits. As a result, it has become vital to prove their effectiveness through scientific and other experimental means. The potency of moxibustion with moxa cone and hand and finger acupunture have been proven scientifically. but diet and herbal methods appear to be practiced as a result of customs passed down from generations. In addition, it is submitted that the effectiveness of the traditional methods of disease control and our heathy lifestyle that are easily found in the nursing field must be verified.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.9
• /
• pp.563-571
• /
• 2018

The purpose of this study is to explore the direction of multicultural mentoring class activities in order to promote the professional growth and critical reflection of student mentors who are undergraduate students from a variety of major. For this purpose, the contents and phenomena of the multicultural mentoring of the mentor - mentee were reported as activity texts, and then seven directions of textuality were applied to explore the direction of multicultural mentoring class activities. As a result, coherence refers to the relationship between the mentor and the mentee for continuing the activities of multicultural mentoring, and cohesiveness refers to the relationship between the mentor and the mentee. It was called the achievement of identity. Intention means that the mentor has an intention or goal for the class before the mentoring activity, and tolerance means that the text produced by the mentor in the multicultural mentoring process is accepted by the mentee. Intentional means that the mentor has intention or goal for the class before the mentoring class activity, and tolerance means having the text as the class activity text when the mentor's text is accepted by the multicultural mentoring class activity process. In the case of informativeness, the information produced by the mentor is less informative when the mentee is predictable and less informative when the predictor is low. In the case of contextuality, contextuality of class activities can be changed according to the physical text situation and the mentee situation in class activity. In case of multicultural mentoring class activity, except for case where mentor creates new class activity text, it is related to the production of class activity texts through mentor learning experiences, peer friends' advice, and education.

• Journal of Periodontal and Implant Science
• /
• v.30 no.4
• /
• pp.851-870
• /
• 2000

The major goals of periodontal therapy is the functional regeneration of periodontal supporting structures already destructed by periodontal disease as well as the reduction of signs and symptoms of progressive periodontal disease. There have been many efforts to develop materials and therapeutic methods to promote periodontal wound healing. There have been increasing interest on the chitosan made by chitin. Chitin is second only to cellulose as the most abundant natural biopolymer. It is a structural component of the exoskeleton of invertebrates(e.g., shrimp, crabs, lobsters), of the cell wall of fungi, and of the cuticle of insects. Chitosan is a derivative of chitin made by deacetylation of side chains. Many experiments using chitosan in various animal models have proven its beneficial effects. The aim of this study is to evaluate the osteogenesis of chitosan on the calvarial critical size defect in Sprague Dawley rats. An 8 mm surgical defect was produced with a trephine bur in the area of the midsagittal suture. The rats were divided into two groups: Untreated control group versus experimental group with 50mg of soluble chitosan gel. The animals were sacrificed at 2, 4 and 8 weeks after surgical procedure. The specimens were examined by histologic, histomorphometric and radiodensitometric analyses. The results are as follows: 1. The length of newly formed bone in the defects was $102.91{\pm}25.46{\mu}m$, $219.46{\pm}97.81{\mu}m$ at the 2 weeks, $130.95{\pm}39.24{\mu}m$, $212.39{\pm}89.22{\mu}m$ at the 4 weeks, $181.53{\pm}76.35{\mu}m$ and $257.12{\pm}51.22{\mu}m$ at the 8 weeks in the control group and experimental group respectively. At all periods, the means of experimental group was greater than those of control group. But, there was no statistically significant difference between the two groups. 2. The area of newly formed bone in the defects was $2962.06{\pm}1284.48{\mu}m^2$, $5194.88{\pm}1247.88{\mu}m^2$ at the 2 weeks, $5103.25{\pm}1375.88{\mu}m^2$, $7751.43{\pm}2228.20{\mu}m^2$ at the 4 weeks and $8046.20{\pm}818.99{\mu}m^2$, $15578.57{\pm}5606.55{\mu}m^2$ at the 8 weeks in the control group and experimental group respectively. At all periods, the means of experimental group was greater than those of control group. The experimental group showed statistically significant difference to the control group at the 2 and 8 weeks. 3. The density of newly formed bone in the defects was $14.26{\pm}6.33%$, $27.91{\pm}6.65%$ at the 2 weeks, $20.06{\pm}9.07%$, $27.86{\pm}8.20%$ at the 4 weeks and $22.99{\pm}3.76%$, $32.17{\pm}6.38%$ at the 8 weeks in the control group and experimental group respectively. At all periods, the means of experimental group was greater than those of control group. The experimental group showed statistically significant difference to the control group at the 2 and 8 weeks. These results suggest that the use of chitosan on the calvarial defects in rats has significant effect on the regeneration of bone tissue in itself

• Applied Chemistry for Engineering
• /
• v.18 no.3
• /
• pp.267-272
• /
• 2007

The critical micelle concentration (CMC) and the counterion binding constant (B) in a mixed micellar state of the trimethyltetradecylammonium bromide (TTAB) with the polyoxyethylene (23) lauryl ether (Brij 35) at $25^{\circ}C$ in water and in aqueous solutions of n-butanol (0.1 M, 0.2 M, and 0.3 M) were determined as a function of ${\alpha}_1$ (the overall mole fraction of TTAB) by the use of electric conductivity method and surface tensiometer method. Various thermodynamic parameters ($X_i$, ${\gamma}_i$, $C_i$, ${a_i}^M$, ${\beta}$, and ${\Delta}H_{mix}$) were calculated by means of the equations derived from the nonideal mixed micellar model. The effects of n-butanol on the micellization of TTAB/Brij 35 mixtures have been also studied by analyzing the measured and calculated thermodynamic parameters.

• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.379-384
• /
• 2011

The critical micelle concentration (CMC) and the counter ion binding constant (B) for the mixed micellizations of DBS (sodium dodecylbenzenesulfonate), SDS (sodium dodecylsulfate), and Brij 30 (polyoxyethylene(4) lauryl ether) at $25^{\circ}C$ in pure water were determined by the use of electric conductivity and surface tension measuring methods. Various thermodynamic parameters ($X_i,\;{\gamma}i,\;C_i,\;a_i^M,\;{\beta}$, and ${\Delta}H_{mix}$) were calculated and compared with each other mixed surfactant system by means of the equations derived from the nonideal mixed micellar model. The results show that the SDS molecule interacts more strongly with Brij 30 molecule than DBS molecule and that the SDS/Brij 30 mixed surfactant system has the greatest negative deviation from the ideal mixed micellar model and the SDS/DBS mixed system has followed almost the ideal mixed micellar model.

• Journal of the Korean Chemical Society
• /
• v.50 no.5
• /
• pp.355-361
• /
• 2006

The critical micelle concentration (CMC) and the counterion binding constant (B) in a mixed micellar state of the sodium dodecylbenzenesulfonate (DBS) with the polyoxyethylene(23) lauryl ether (Brij 35) at 25oC in water and aqueous solutions of n-butanol (0.1M, 0.2M, and 0.3M) were determined as a function of a1 (the overall mole fraction of DBS) by the use of electric conductivity method and surface tensiometer method. Various thermodynamic parameters (Xi, i, Ci, aiM, , and Hmix) were calculated by means of the equations derived from the nonideal mixed micellar model. The effect of n-butanol on the micellization of the DBS/Brij 35 mixtures has been also studied by analyzing the measured and calculated thermodynamic parameters.

• The Journal of Fisheries Business Administration
• /
• v.38 no.2
• /
• pp.25-40
• /
• 2007

Recently, fisheries safety has been a matter of primary concern among consumers and suppliers. This phenomenon made them require the introduction of fisheries traceability systems. For traceability systems to be effective, automatic identification means play an important role. Therefore, RFID-based fisheries traceability systems are more required than barcode-based fisheries traceability systems. Unlikely EU and Japan, Korea did not accept mandatory traceability regulations. But Many countries began to accept mandatory traceability regulations to diminish food risks. So Korea is expected to adopt them in the near future. The purpose of this study is to find what benefits are generated from the adoption of RFID-based fisheries traceability systems and are related to their success. To do these, this study investigated primary benefits of RFID-based fisheries traceability systems from the perspectives of consumers and suppliers. Consumers' benefits were derived from the perceived risk dimensions. And suppliers' benefits were derived from operational benefits of RFID systems. To purify the benefits from RFID-based fisheries traceability systems, reliability and factor analysis were used. And the refined benefits of RFID-based fisheries traceability systems were additionally analyzed to find which benefits were significantly related to fisheries traceability systems' success. According to the analysis results, all risk dimensions except social risk were significantly related to their success. But in the benefits of suppliers, only "recalls and counterfeits" factor was significantly related to their success. These results implied that fisheries traceability systems should be based RFID technology instead of barcode and fisheries traceability systems were related to almost food risk dimensions. It's because these significant factors are related all food risks except social risk and the benefits of suppliers can be derived from only RFID technology.

• Journal of Dairy Science and Biotechnology
• /
• v.14 no.1
• /
• pp.1-15
• /
• 1996

With the starting of Uruguay Round(UR) and World Trade Organization(WTO), the direction of trade in world market has been setting up with the beginning of an opening age. However, world nations has been expressed a deep concern on the marketing and the circulations of unsafe foods, especially in the international trade of food products. Therefore, administration of most countries are taking a firm step on the safety of imported food products. The implementation of hazard analysis critical control point(HACCP) system in food industry is strongly appeared on the world stage at this point. Major international organizations, such as WHO, WTO, and EC have been recognized the importance of HACCP and already documented on their future plan for standardization of food safety in the international trade of food products by means of the this system. Several advanced countries have already developed HACCP system for the food industry and have been producing food products under this system. Now they have proposed rulemakings on a mandatory HACCP program in the production of domestic and imported food products. However, with the lacking of knowledge and information on the HACCP, there has been no actions for applying this system in the food industry of Korea. It is a very clear fact that Korean dairy and food industry will be faced on serious problems in exporting food products without applying HACCP system in the very near future. The objective of this article is to introduce the world trend. necessity, and application of HACCP system in food and dairy industry. Also a HACCP system developed by one dairy processing plant in Europe will be demonstrated as a moldel system.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.131-131
• /
• 2003

The advent of photonic technologies in the field of communications and data transmission has been heavily increasing the demand in integrated optical (IO) circuits capable of accomplishing not only simple tasks like signal, but also more sophisticated functions like all-optical signal routing or active multiplexing/demultiplexing. In the last decade, sol-gel technology has been widely used to prepare optical materials. Sol-gel processes show many promises for the development of low-loss, high-performance glass integrated optical circuits. However, crack formation is likely to occur during heat treatment in thick gel films. In order to overcome the critical thickness limitation, the organic-modified silicate has been widely used. In this case coating matrices have been prepared from the organo-silanes of T structures, acidic catalyst and the as-prepared gel films have been heat-treated below 200$^{\circ}C$ to avoid the crack formation and the degradation of organic components. However, the films prepared in the acidic condition and the low heat temperature make the films contain high OH groups which is the major optical loss function. In this work, C$\sub$6/H$\sub$5/SiO$\sub$1.5/ films were prepared on silicon substrate by sol-gel method using base catalyst in a PTMS/NH$_4$OH/H$_2$O/C$_2$H$\sub$5/OH system. The sol showed spinable viscosity at 50 wt% of solid content, and neglectable viscosity change with time. The films were crack-free and transparent after curing at 450 $^{\circ}C$, and highly condensed to minimize OH content in C$\sub$6/H$\sub$5/SiO$\sub$1.5/ networks. The effects of heat treatment of the films are characterized on the critical thickness, the chemical composition and the refractive indices by means of SEM, FT-IR, TGA, prism coupler, respectively.