• 대한토목학회논문집
• /
• 제8권2호
• /
• pp.1-11
• /
• 1988

층상구조(層狀構造)로 이루어진 아스팔트 포장도로(鋪裝道路)의 안전성(安全性)은 교통하중(交通荷重)과 아스팔트 콘크리트의 층별강도(層別觸强度)와의 함수관계(函數關係)에 의하여 평가된다. 본(本) 논문(論文)은 아스팔트 포장도로(鋪裝道路)의 신뢰도(信賴度)를 고찰(考察)하기 위하여 확률론적(確率論的) 방법(方法)을 적용시켰는데 이에 사용(使用)된 자료(資料)들은 현장(現場) 또는 문헌(文獻)으로부터 수집하였다. 각층(各層)의 임계인장강도(臨界引張强度)를 목표신뢰도(目標信賴度)에 근거(根據)하여 시뮬레이션 방법(方法)으로 산정(算定)하였는데 이 값을 실제로 표면(表面)에 손상(損傷)이 일어난 시료강도(試料强度)와 비교(比較), 고찰(考察)하였다. 확률론적방법(確率論的方法)으로 산정(算定)한 임계강도(臨界强度)는 현행(現行)의 도로조건(道路條件)에 적합(適合)한 값임을 알 수 있었다.

• Structural Monitoring and Maintenance
• /
• 제8권4호
• /
• pp.345-360
• /
• 2021

This paper presents an analytical approach to calculate the buckling load of the cylindrical ring structures subjected to both hydrostatic and hydrodynamic pressures. Based on the conservative law of energy and Timoshenko beam theory, a theoretical formula, which can be used to evaluate the critical pressure of buckling, is first derived for the simplified cylindrical ring structures. It is assumed that the hydrodynamic pressure can be treated as an equivalent hydrostatic pressure as a cosine function along the perimeter while the thickness ratio is limited to 0.2. Note that this paper limits the deformed shape of the cylindrical ring structures to an elliptical shape. The proposed analytical solutions are then compared with the numerical simulations. The critical pressure is evaluated in this study considering two possible failure modes: ultimate failure and buckling failure. The results show that the proposed analytical solutions can correctly predict the critical pressure for both failure modes. However, it is not recommended to be used when the hydrostatic pressure is low or medium (less than 80% of the critical pressure) as the analytical solutions underestimate the critical pressure especially when the ultimate failure mode occurs. This implies that the proposed solutions can still be used properly when the subsea vehicles are located in the deep parts of the ocean where the hydrostatic pressure is high. The finding will further help improve the geometric design of subsea vehicles against both hydrostatic and hydrodynamic pressures to enhance its strength and stability when it moves underwater. It will also help to control the speed of the subsea vehicles especially they move close to the sea bottom to prevent a catastrophic failure.

• Structural Engineering and Mechanics
• /
• 제44권1호
• /
• pp.35-49
• /
• 2012

A series of fatigue test were carried out on scarfed lap joints (SLJ) using in airfoil siding to explore the effect of structural details, such as rows of rivets, lap angles, on its fatigue performance. Finite element (FE) analysis was employed to explore the effect of lap angle on load transfer and the stress evolution around the rivet hole. At last, the fatigue lives were predicted by nominal stress approach and critical plane approach. Both of the test results and predicted results showed that fatigue life of SLJ was remarkably increased after introducing lap angle into the faying surface. Specimen with the lap angle of $1.68^{\circ}$ exhibits the best fatigue performance in the present study.

• 컴퓨터교육학회논문지
• /
• 제9권1호
• /
• pp.107-118
• /
• 2006

부하재분배 방법은 컴퓨터시스템에서 중요한 요소이다. 수신자 개시 부하재분배 알고리즘에서는 전체 시스템이 저부하일 때 수신자(저부하 프로세서)가 부하를 이전받기 위해 송신자(과부하 프로세서)를 발견할 때까지 불필요한 이전 요청 메시지를 계속 보내게 된다. 따라서 이같은 상황에서는 과부하 상태인 송신자 프로세서로부터 승인 메시지를 받기까지 불필요한 프로세서간 통신으로 인하여 프로세서의 이용률이 저하되고, 타스크 처리율이 낮아지는 문제점이 발생한다. 본 논문에서는 유전알고리즘을 기반으로 하여 자기조절 능력을 포함하도록 한 이질형 분산 시스템에서의 동적 부하재분배 접근 방법을 제안한다. 이 기법에서는 불필요한 요청 메시지를 줄이기 위해 요청 메시지가 전송될 프로세서들이 제안된 유전 알고리즘에 의해 결정된다.

• Structural Engineering and Mechanics
• /
• 제9권3호
• /
• pp.305-321
• /
• 2000

This paper develops a simplified, but effective, algorithm in obtaining critical slab design moments for parking garages. Maintaining the uniformly distributed load concept generally adopted in the design of building structures, this paper also introduces the equivalent vehicle load factors, which can simulate the vehicle load effects without taking additional sophisticated numerical analyses. After choosing a standard design vehicle of 2.4 tons through the investigation of small to medium vehicles made in Korea, finite element analyses for concentrated wheel loads were conducted by referring to the influence surfaces. Based on the obtained member forces, we determined the equivalent vehicle load factors for slabs, which represent the ratios for forces under vehicle loads to these under uniformly distributed loads. In addition, the relationships between the equivalent vehicle load factors and sectional dimensions were also established by regression, and then used to obtain the proper design moments by vehicle loads. The member forces calculated by the proposed method are compared with the results of four different approaches mentioned in current design codes, with the objective to establish the relative efficiencies of the proposed method.

• Steel and Composite Structures
• /
• 제14권3호
• /
• pp.283-293
• /
• 2013

This paper deals with the applicability of a new extended layerwise optimization method for thermal buckling load optimization of laminated composite plates. The design objective is the maximization of the critical thermal buckling of the laminated plates. The fibre orientations in the layers are considered as design variables. The first order shear deformation theory (FSDT) is used for the finite element solution of the laminates. Finally, the numerical analysis is carried out to show the applicability of extended layerwise optimization algorithm of laminated plates for different parameters such as plate aspect ratios and boundary conditions.

• Structural Engineering and Mechanics
• /
• 제28권2호
• /
• pp.221-238
• /
• 2008

Numerical solution to buckling analysis of beams and columns are obtained by the method of differential quadrature (DQ) and harmonic differential quadrature (HDQ) for various support conditions considering the variation of flexural rigidity. The solution technique is applied to find the buckling load of fully or partially embedded columns such as piles. A simple semi- inverse method of DQ or HDQ is proposed for determining the flexural rigidities at various sections of non-prismatic column ( pile) partially and fully embedded given the buckling load, buckled shape and sub-grade reaction of the soil. The obtained results are compared with the existing solutions available from other numerical methods and analytical results. In addition, this paper also uses a recently developed technique, known as the differential transformation (DT) to determine the critical buckling load of fully or partially supported heavy prismatic piles as well as fully supported non-prismatic piles. In solving the problem, governing differential equation is converted to algebraic equations using differential transformation methods (DT) which must be solved together with applied boundary conditions. The symbolic programming package, Mathematica is ideally suitable to solve such recursive equations by considering fairly large number of terms.

• 한국농공학회지
• /
• 제34권1호
• /
• pp.66-77
• /
• 1992

A prototype probabilistic approach to thickness design for asphalt pavement surface course was developed using first-order second moment probability model. The tensile strain (load effect) developing at the bottom of surface layer due to the wheel load and the critical strain (resistance) of asphalt concrete were used as random variables for pavement reliability analysis. Based on the parameters for load effect and resistance data collected from reference and field, simulated data were generated by Monte Carlo method for reliability evaluation of the pavement for a typical rural highway. Thickness of pavement surface course was defined in terms of target reliability of the pavement, growth factor of traffic, design life of pavement and resistance of the asphalt concrete to be placed on the pavement. According to these rationales, prototype thickness design chrats were sugested through example studies. From these, similar design charts can be developed for many pavements if appropriate data and target reliability are determined.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권6호
• /
• pp.306-314
• /
• 2005

In this paper, a new approach that is based on EEAC & only with network solutions for CS&S in the transient stability assessment is developed. The proposed CS&S algorithm in conjunction with EEAC to include the capability of performing on-line TSA without TDS is used to calculate the critical clearing time for stability index. In this algorithm, all generators are represented by classical models and all loads are represented by constant impedance load models. The accelerating & synchronizing power coefficient as an index is determined at its disturbance through solving network equation directly. As mentioned above, a new index for generator is generally used to determine the critical generators group. The generator rotor angle is fixed for non-critical generators group, but has equal angle increments for critical generators group. Finally, the critical clearing time is calculated from the power-angle relationship of equivalent OMIB system. The proposed CS&S algorithm currently being implemented is applied to the KEPCO system. The CS&S result was remarkably similar to TSAT program and SIME. Therefore, it was found to be suitable for a fast & highly efficient CS&S algorithm in TSA. The time of CS&S for the 139 contingencies using proposed CS&S algorithm takes less than 3 seconds on Pentium 4, 3GHz Desktop.

• Structural Engineering and Mechanics
• /
• 제31권1호
• /
• pp.25-38
• /
• 2009

Local failure of a primary structural component induced by direct air-blast loading may be itself a critical damage and lead to the partial or full collapse of the building. As an extensive research to mitigate blast-induced hazards in steel frame structure, a state-of-art analytical approach or high-fidelity computational nonlinear continuum modeling using computational fluid dynamics was described in this paper. The capability of the approach to produce reasonable blast pressures on a steel wide-flange section column was first evaluated. Parametric studies were conducted to observe the effects of section sizes and boundary conditions on behavior and failure of columns in steel frame structures. This study shows that the analytical approach is reasonable and effective to understand the nature of blast wave and complex interaction between blast loading and steel column behavior.