• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.12 no.3
• /
• pp.175-179
• /
• 1979

One of the major problems in tile activated sludge system has been difficulty in separating the microbial solids from the treated effluent and in returning them to the aeration tank. Another problem has been the digestion of the excess activated sludge. In constrast, it has not been difficult to separate the microbial solids from the treated effluent from the biological fixed-film systems(RBC process, Trickling Filter, FAST process). These systems have also featured less sludge production. Recently, it was proposed to experiment with the RESMAS process in order to eliminate the settling tank and sludge concentration facilities and to reduce the quantity of excess sludge for final disposal. The effluent quality could be predicted by .the concept of the maximum accumulation capacity. However, the hydraulic characteristics of the screen media in the RESMAS reactor were not dynamic. The object of the present study is to evalute the sludge accumulation rate and effluent quality prediction in the REMSMAS process designed in the dynamic hydraulic structure. This process can eliminate the final sedimentation tank and sludge concentration tank needed in the RBC, CMAS, Trickling Filter and FAST processes. Also, the effluent quality is desirable to compare with other processes. It appeared that the value of the sludge holding capacity was higher than those of the RESMAS and FAST processes, and the periods of the critical operating time were proportional to the substrate hydraulic loadings.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.6 no.2
• /
• pp.105-117
• /
• 2015

The purpose of this study is to develop a new seismic resistant method by using precast concrete wall panels for existing low-rise, reinforced concrete beam-column buildings such as school buildings. Three quasi-static hysteresis loading tests were experimentally performed on one unreinforced beam-column specimen and two reinforced specimens with L-type precast wall panels. The results were analyzed to find that the specimen with anchored connection experienced shear failure, while the other specimen with steel plate connection principally manifested flexural failure. The ultimate strength of the specimens was determined to be the weaker of the shear strength of top connection and flexural strength at the critical section of precast panel. In this setup of L-type panel specimens, if a push loading is applied to the reinforced concrete column on one side and push the precast concrete panel, a pull loading from upper shear connection is to be applied to the other side of the top shear connection of precast panel. Since the composite flexural behavior of the two members govern the total behavior during the push loading process, the ultimate horizontal resistance of this specimen was not directly influenced by shear strength at the top connection of precast panel. However, the RC column and PC wall panel member mainly exhibited non-composite behavior during the pull loading process. The ultimate horizontal resistance was directly influenced by the shear strength of top connection because the pull loading from the beam applied directly to the upper shear connection. The analytical result for the internal shear resistance at the connection pursuant to the anchor shear design of ACI 318M-11 Appendix-D except for the equation to predict the concrete breakout failure strength at the concrete side, principally agreed with the experimental result based on the elastic analysis of Midas-Zen by using the largest loading from experiment.

• The KIPS Transactions:PartA
• /
• v.16A no.6
• /
• pp.443-452
• /
• 2009

Although 32-bit architectures are becoming the norm for modern microprocessors, 16-bit ones are still employed by many low-end processors, for which small size and low power consumption are of high priority. However, 16-bit architectures have a critical disadvantage for embedded processors that they do not provide enough encoding space to add special instructions coined for certain applications. To overcome this, many existing architectures adopt non-orthogonal, irregular instruction sets to accommodate a variety of unusual addressing modes. In general, these non-orthogonal architectures are regarded compiler-unfriendly as they tend to requires extremely sophisticated compiler techniques for optimal code generation. To address this issue, we proposed a compiler-friendly processor with a new addressing mode, called the dynamic implied addressing mode(DIAM). In this paper, we will demonstrate that the DIAM provides more encoding space for our 16-bit processor so that we are able to support more instructions specially customized for our applications. And we will explain the advanced architecture which has improved performance. In our experiment, the proposed architecture shows 11.6% performance increase on average, as compared to the basic architecture.

• Korean Journal of Medicinal Crop Science
• /
• v.3 no.2
• /
• pp.146-150
• /
• 1995

Weed control in the Korean ginseng(Panax ginseng C.A. Meyer) garden is more difficult than in other crops because the ginseng is a perennial crop and has to be cultivated under the artificial shading. As hand weeding is the only practical means to control weed after crop establishment, a selective herbicide would greatly simplify the control of weed in ginseng garden. In an exploratory experiment, the hervicide Fluazifop-butyl was found to be selectively safe for the Korean ginseng plants. Various rates of Fluazifop-butyl were sprayed on 2-, 3-, and 4-years old ginseng plants as a foliar spray to detect crop injury and to difine their critical concentration. No apparent injury to the ginseng plant was noticable even the doubled application rate of Fluazifop-butyl the based on recommended dosage. Neither abnormal foliar change nor any inhibition in leaf and stem growth was resulted for 2-, 3-, and 4-years old ginseng plants treated with Fluazifop-butyl tripled the recommended usage. The foliar treatments of Fluazifop-butyl did not influence the photosynthesis ability but inhibited the respiration of the ginseng leaf.

• Nuclear Engineering and Technology
• /
• v.52 no.4
• /
• pp.721-733
• /
• 2020

In nuclear engineering, the occurrence of critical heat flux (CHF) is complicated for rod bundle, and it is much more difficult to predict the CHF when it is in natural circulation under motion condition. In this paper, the dryout-type CHF is investigated for the rod bundle in a natural circulation loop under rolling motion condition based on the coupled analysis of subchannel method, a one-dimensional system analysis method and a CHF mechanism model, namely the three-fluid model for annular flow. In order to consider the rolling effect of the natural circulation loop, the subchannel model is connected to the one-dimensional system code at the inlet and outlet of the rod bundle. The subchannel analysis provides the local thermal hydraulic parameters as input for the CHF mechanism model to calculate the occurrence of CHF. The rolling motion is modeled by additional motion forces in the momentum equation. First, the calculation methods of the natural circulation and CHF are validated by a published natural circulation experiment data and a CHF empirical correlation, respectively. Then, the CHF of the rod bundle in a natural circulation loop under both the stationary and rolling motion condition is predicted and analyzed. According to the calculation results, CHF under stationary condition is smaller than that under rolling motion condition. Besides, the CHF decreases with the increase of the rolling period and angular acceleration amplitude within the range of inlet subcooling and mass flux adopted in the current research. This paper can provide useful information for the prediction of CHF in natural circulation under motion condition, which is important for the nuclear reactor design improvement and safety analysis.

• Journal of fish pathology
• /
• v.14 no.2
• /
• pp.97-102
• /
• 2001

Olive flounder, Paralichthys olivaceus known as an one of the major aquacultured species in Korea were exposed to cadmium(Cd) with different protocols and analyzed the effects of exposure on the immune response. Antibody levels in sera of the group exposed to Cd(20ppb) by immersion method from 2 weeks before immuniztion with formalinised Edwardsiella tarda(E. tarda) KFE entigen to the end of experiment reached to peak level faster than that of the non-exposed group. After this peaking time the levels decreased much at a faster rate compared to the non-exposed group. This tendency was also appeared in the numbers of specific antibody secreting cells(SASC) analyzed with the enzyme-linked immunospot (ELISPOT)-assay technique in the splenocytes of the experimental groups exposed to Cd with different ways. Interestingly, the group exposed to Cd for 2 weeks before immunization also showed increased numbers of SASC unlikely the antibody production and suggested a more critical influence of cadmium exposure in early stage of immune reaction. Artificial infection with live E. tarda KFE induces 100% mortality in the flounder exposed to cadmium throughout the experimental period from two weeks before the immunization. It may imply that some other factors related to specific immunity are involving in the defence system of flounder exposed to Cd. Taked together. Cd exposure may induce temporaily stimulatory or indhibitory effects on the immune reaction, but suppress the physiological systems for the resistant against the infective agents with other toxic effects.

• Korean Chemical Engineering Research
• /
• v.50 no.6
• /
• pp.960-968
• /
• 2012

In this study, the measurement of physical properties of 3 different ethylene oxide adducted zwitterionic surfactants were measured such as critical micelle concentration, surface tension, interfacial tension, contact angle, viscosity and foam stability. Also, the dual function characteristics of the zwitterionic surfactants were investigated by determining an isoelectric point, which were obtained using zeta potential measurement and QCM (quartz crystal microbalance) experiments. The isoelectric point of the synthesized zwitterionic surfactant determined by zeta potential measurement was close to that obtained by QCM experiment and both results have shown almost the same trend as that determined by the frictional property measured using an automated mildness tester. In particular, it has been observed that all three surfactants used during this study provide better softening effect at a pH of neutral condition than at an acidic or an alkaline condition. This result indicates that the synthesized surfactants act as a cationic surfactant at a pH of neutral condition and thus provide good softening effect during a rinsing cycle in the detergency process.

• Journal of Korean Society of Forest Science
• /
• v.76 no.3
• /
• pp.243-248
• /
• 1987

The U.S. Forest Service administers the world's largest forestry research organization. From its modest beginning in 1876, some 30 years before the United States national forest system was established, the research branch has devoted its effort to meet current and future information needs of the forestry community of the United States, not just for the U.S. Forest Service. The research branch is one of three major administrative units of the U.S. Forest Service. The others being the National Forest System and State and Private Forestry. Currently the National Forest System comprises 155 national forests, 19 national grasslands, and 18 utilization projects located in 44 states. Puerto Rico, and the Virgin Islands. The National Forest System manages these areas for a large array of uses and benefits including timber, water, forage, wildlife, recreation, minerals, and wilderness. It is through the State and Private Forestry branch that the U.S. Forest Service cooperates and coordinates forestry activities and programs with state and local governments, forest industries, and private landowners. These activities include financial and technical assistance in disease, insect, and fire protection ; plan forestry programs ; improve harvesting and marketing practices ; and transfer forestry research results to user groups. Forestry research is carried out through eight regional Forest Experiment Stations and the Forest Product Laboratory. Studies are maintained at 70 administrative sites, and at 115 experimental forest and grasslands. All of the current sciences that composed modern forestry are included in the research program. These range from forest biology (i. e. silviculture, ecology, physiology, and genetics) to the physical, mathematical, engineering, managerial, and social sciences. The levels of research range from application, developmental, and basic research. Research planning and priority identification is an ongoing process with elements of the research program changing to meet short-term critical information needs(i. e. protection research) to long-term opportunities(i. e. biotechnology). Research planning and priority setting is done in cooperation with National Forest Systems, forest industries, universities, and individual groups such as environmental, wilderness, or wildlife organizations. There is an ongoing review process of research administration, organization, and science content to maintain quality of research. In the U.S. Forest Service the research responsibility is not completed until the new information is being applied by the various user group : I. e. technology transfer program. Research planning and development in the U.S. Forest Service is a dynamic activity. Porgrams for the year 2000 and beyond are now in the planning stage.

• Journal of the Korean earth science society
• /
• v.32 no.4
• /
• pp.360-372
• /
• 2011

In order to clarify the advection and dispersion characteristics of volcanic tephra to be emitted from the Mt. Baekdu, several numerical experiments were carried out using three-dimensional atmospheric dynamic model, Weather and Research Forecast (WRF) and Laglangian particles dispersion model FLEXPART. Four different temporally averaged meteorological values including wind speed and direction were used, and their averaged intervals of meteorological values are 1 month, 10 days, and 3days, respectively. Real time simulation without temporal averaging is also established in this study. As averaging time of meteorological elements is longer, wind along the principle direction is stronger. On the other hands, the tangential direction wind tends to be clearer when the time become shorten. Similar tendency was shown in the distribution of volcanic tephra because the dispersion of particles floating in the atmosphere is strongly associated with wind pattern. Wind transporting the volcanic tephra is divided clearly into upper and lower region and almost ash arriving the Korean Peninsula is released under 2 km high above the ground. Since setting up the temporal averaging of meteorological values is one of the critical factors to determine the density of tephra in the air and their surface deposition, reasonable time for averaging meteorological values should be established before the numerical dispersion assessment of volcanic tephra.

• The Journal of Korean Academy of Prosthodontics
• /
• v.32 no.1
• /
• pp.148-169
• /
• 1994

The concept of biologic attachment of load-bearing implants has developed over the past decades as an alternative to the difficulties associated with long term implantation using mechanical fixation and bone cement. The choice of implant material is also as critical an element as site preparation or insertion procedure. The properties of implants that affect host tissue responses are not limited to chemical composition alone, but also include shape, surface characteristics, site of implantation, and mechanical interaction with host tissues. Initial mechanical interlocking prevents micromotion and may be a prerequisite for direct bone apposition. A hard tightening of screws does not necessarily mean a stronger fixation and final tightening of the fixtures is dependent on the experience of the operator. Removal torque is lower than insertion torque. The purpose of this study was to investigate differences in the removal torques at the bone-implant interface of polished and sandblasted Titanium. This experiment will give insight into important factors that must be considered when interpreting in vivo screwing forces on implants during the connection of the transmucosal abutments. We evaluated the significance of different surface textures by comparison of the withdrawal forces necessary for removal of otherwise identical rough and polished implants of Titanium and also evaluated interfacial response on the light microscopic level to implant surface. And the priority of the area of insertion on osseointegration were evaluated. 9 Titanium implants - among them, 3 were for the developmental - of either a smooth or rough surface finish were inserted in the dog mandible in the right side. 3 months later Kanon Torque Gauge was used to unscrew the implants. The results were as follows : 1. No significant difference was seen in the removal torque due to variation in surface treatment, 23 Ncm for the sandblasted and 23.33 Ncm for the polished surface (p>0.05). 2. Implants in the anterior (25 Ncm) mandible showed better resistance to unscrewing in comparison to ones in the posterior (18 Ncm) region (p<0.05). 3. Developmental fixtures (22 Ncm) had similar pullout strength to the control group (p>0.05).