• Journal of the Semiconductor & Display Technology
• /
• v.15 no.1
• /
• pp.22-26
• /
• 2016

Extreme ultraviolet (EUV) pellicle is one of the most concerned research in the field of EUV lithography (EUVL). Imaging performance of EUV mask with pellicle should be investigated prior to high volume manufacturing (HVM) of EUVL. In this paper, we analyzed the relationship between standoff distance and imaging performance of EUV mask to verify the influences of relative standoff distance on imaging performance. As a result, standoff distance of EUV pellicle has no effect on imaging performance of EUV mask such as critical dimension (CD), normalized image log slope (NILS) and image contrast. Therefore, pellicle support structure can be flexibly designed and modified in diverse ways to complement the thermal limitation of EUV pellicle membrane.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1726-1728
• /
• 2003

The aging diagnosis method using partial discharge measurement detects discharge signals that critical cause of failure in insulation material operated a long time and can diagnose aging state of insulation materials with an aging analysis algorithm. The HFPD measurement method is a technique to analyze aging state of high voltage insulation materials and detect higher frequency signals than conventional PD measurement method therefore it takes less noise effect and could execute active line measurement. It is possible to analyze main discharge phenomena and obtain access to aging progress occurred in insulation materials through accumulation of HFPD signals during determined interval and expression of fractal dimension using statistical process of accumulated signals. The HFPD signals that occurred in each applied voltages are measured during 180 cycles and accumulated to the same phase of one cycle. These patterns that made by previous method are normalized with logarithm function and than inputted to neural networks. The aging diagnosis of insulation material was possible and the recognition ratio of neural network appeared very high.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.525-529
• /
• 2009

In this paper, microstrip patch antenna with diagonal slotted type using RFID is designed. This microstrip patch antenna is designed by considering the properties of critical parameter like the size, the truncating dimension, position of feed power and the height of airspace. the designed microstrip patch antenna has the lowest return loss in 915MHz, and in case of the voltage standing wave ratio(VSWR) is less than 1.2 under return loss -16dB, it has bandwidth of about 26MHz. Also, the microstrip patch antenna has the gain of 6dBi on the center frequency of 915MHz band and 2.8dB in the rate of reduction.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.462-473
• /
• 2019

The effects of the location and dimension of the gate, location, and volume of the feeder, application of a chill, chill volume, and heating method of the feeder with respect to the effect of the mold-designing technologies on the defect status of the products are described. It is possible to increase the solidification time of the feeder by heating feeder. Furthermore, the pressure generated from the feeder is imposed on a product, and this decreases the generation of shrinkage porosities. In this study, two types of gating and feeding systems had been proposed: the bottom L-type junctions and the top L-type junctions. Additionally, solidification behaviors, such as solidification time, shrinkage porosities, weight percentage of chill system to product, hot spot, and solidification time ratio (=Solidification time of feeder/solidification time of product), are extensively analyzed by using commercial casting simulation software. Based on the solidification behaviors, reasonable mold design, feeding system, critical feeder heating temperature, and solidification time ratios are proposed in the sand casting process for the fabrication of carrier housing in order to reduce the casting defects and to increase the recovery rate.

• Journal of Distribution Science
• /
• v.20 no.8
• /
• pp.123-133
• /
• 2022

Purpose: As moment-based marketing messages (i.e., messages related to current moments or event), companies put significant investments to distribute TV advertising related to external moments in a retail environment. While the literature offers strong support for the value of distributions of context-based messaging to advertisers, less attention has been given to how to design those messages to effectively communicate across channels. This research adds a new dimension of analysis to the study of advertising context and its cross-channel effects on online consumer behavior. Research Design, Data and Methodology: A system-of-equations Tobit regression model was adopted using data collected from an advertising agency that consists of 1,223 TV ads aired during the Rio Olympics and NCAA, tagging from consumers, and a text analysis. Results: First, TV ads with high centrality of context lead to lower online search behavior and higher online social actions. Second, how brands can design messages more effectively was explored by using product information as a moderator that could improve the impact of context-based TV advertisements. Conclusions: Given that expenses in traditional channels are still one of the biggest channel management decisions, it is critical to understand how consumer engagement varies by design of context-based TV advertising.

• Journal of Korean Society for Quality Management
• /
• v.50 no.3
• /
• pp.407-424
• /
• 2022

Purpose: This study examines the relationship between the environment, society, and governance (ESG) perception of service providers and service quality by considering job satisfaction as a mediator in the Korean parcel delivery context. Methods: This study uses a multi-level analysis by incorporating organizational and individual levels of analysis. It employs a survey method for measuring the ESG perception of parcel delivery persons and service quality ratings from the Korean government. A hierarch regression analysis with 241 responses was used to test hypotheses. Results: The results of this study provide evidence that the ESG perception, particularly its social dimension, of parcel delivery persons is positively associated with service quality. This study also finds the positive effect of the ESG perception on job satisfaction. However, the mediating effect of job satisfaction between the ESG perception and service quality was not confirmed. Conclusion: This study presents significant implications for scholars and practitioners. Parcel delivery companies should implement relevant ESG activities and communicate them with their service persons to improve delivery service quality. The ESG perception of employees plays a critical role in the moment of truth in parcel service delivery to enhance customer satisfaction and service quality.

• Earthquakes and Structures
• /
• v.23 no.3
• /
• pp.283-295
• /
• 2022

Seismic design codes permit the use of Equivalent Static Analysis of buildings considering torsional eccentricity e with dynamic amplification factors on structural eccentricity and some accidental eccentricity. Estimation of e in buildings is not addressed in codes. This paper presents a simple approximate method to estimate e in RC Moment Frame and RC Structural Wall buildings, which required no detailed structural analysis. The method is validated by 3D analysis (using commercial structural analysis software) of a spectrum of building. Results show that dynamic amplification factor should be applied on torsional eccentricity when performing Response Spectrum Analysis also. Also, irregular or mixed modes of oscillation arise in torsionally unsymmetrical buildings owing to poor geometric distribution of mass and stiffness in plan, which is captured by the mass participation ratio. These irregular modes can be avoided in buildings of any plan geometry by limiting the two critical parameters (normalised torsional eccentricity e/B and Natural Period Ratio 𝜏 =T_𝜃/T, where B is building lateral dimension, T_𝜃 uncoupled torsional natural period and T uncoupled translational natural period). Suggestions are made for new building code provisions.

• SUVANNABHUMI
• /
• v.6 no.2
• /
• pp.65-84
• /
• 2014

Asia-Pacific Confucian Capitalism is comparable to Atlantic Protestant Capitalism in terms of economic success, as most economies influenced by Confucian culture in East Asia and Southeast Asia are economically well-off in the past 50 years, save for Vietnam. This paper seeks to determine whether Vietnam can follow the path of development of the other Confucian economies, especially in the context of globalization and upcoming regional integration. In the paper, I will use an analytic framework derived from Weber and Huntington to examine the cultural dimension of Vietnam's economic development. In the domestic field, I argue that the core values of Confucianism continue to contribute to the development in Vietnam in many ways; yet one critical element needs to be tapped: the political culture of strong leadership and efficient bureaucracy. Confucian values for development may be compromised by pushing for democratization too early in Vietnam. On a positive note, Confucianism for Vietnam is instrumental in its regional integration into Southeast Asia since it is integrative rather than exclusive. Vietnam's cultural similarity with China may however lead to too much passive learning and conflicts. In conclusion, Confucianism is a valuable asset for Vietnam's economic development, but challenges have to be addressed in order for Vietnam to become the next tiger.

• Geomechanics and Engineering
• /
• v.36 no.2
• /
• pp.157-166
• /
• 2024

Generally, the rubble mound installed on the slope embankment of the open-type wharf is designed based on the impact of wave force, with no consideration for the impact of seismic force. Therefore, in this study, dynamic centrifuge model test results were analyzed to examine the acceleration amplification of embankment reinforced with rubble mound under seismic conditions. The experimental results show that when rubble mounds were installed on the ground surface of the embankment, acceleration response of embankment decreased by approximately 22%, and imbalance in ground settlement decreased significantly from eight to two times. Furthermore, based on the experimental results, one-dimensional site response (1DSR) analyses were conducted. The analysis results indicated that reinforcing the embankment with rubble mound can decrease the peak ground acceleration (PGA) and short period response (below 0.6 seconds) of the ground surface by approximately 28%. However, no significant impact on the long period response (above 0.6 seconds) was observed. Additionally, in ground with lower relative density, a significant decrease in response and wide range of reduced periods were observed. Considering that the reduced short period range corresponds to the critical periods in the design response spectrum, reinforcing the loose ground with rubble mound can effectively decrease the acceleration response of the ground surface.

• Tuberculosis and Respiratory Diseases
• /
• v.69 no.3
• /
• pp.184-190
• /
• 2010

Background: The purpose of this study was to determine the prognostic significance of chest computed tomographic (CT) parameters in acute submassive pulmonary embolism (PE). Methods: Between January 2006 and December 2009, 268 consecutive patients with acute submassive PE that was confirmed by chest CT with pulmonary angiography in emergency room were studied. One experienced radiologist measured CT parameters and judged the presence of right ventricular dysfunction. CT parameters were analyzed to determine their ability to predict a major adverse event (MAE). Results: There were 220 patients included and 61 (27.7%) had MAE. Left ventricular and right ventricular maximum minor axis ($36.4{\pm}8.0$ vs. $41.7{\pm}7.4$, p<0.01; $45.7{\pm}9.4$ vs. $41.5{\pm}7.6$, p<0.01), superior vena cava diameter ($19.2{\pm}3.4$ vs. $18.0{\pm}3.4$, p=0.02), azygos vein diameter ($10.0{\pm}2.2$ vs. $9.2{\pm}2.3$, p=0.02), septal displacement (19 vs. 18, p<0.01) were significantly higher in MAE group than in no MAE group. Patients with MAE had high right ventricular/left ventricular dimension ratio (RV/LV ratio) compared to patients without MAE ($1.34{\pm}0.48$ vs. $1.03{\pm}0.28$, p<0.01). The most useful cut-off value of RV/LV ratio for MAE was 1.3 and the area under the curve was 0.71 (0.62~0.79). Conclusion: RV/LV ratio on chest CT was a significant predictor of submassive PE related shock, intubation, in-hospital mortality, thrombolysis, thrombectomy within 30 days.