• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.10a
• /
• pp.274-277
• /
• 2003

Critical current(Ic) degradation of HTS tapes after bending is one of the hottest issues in HTS development and application studies. Many people are measuring Ic degradations for effect of bending radius. However even if the bending radius is larger than the breaking radius a HTS tapes can be damaged by repetitive bending, which is unavoidable in the winding processes. Therefore, We studied the Ic degradation after repetitive bending. at 77K with self-field, of Bi-2223 tapes processed by "Powder-in-Tube" technique, which was made by America Superconductor Corporation(AMSC) and superconductiing tapes that strain is imposed measured critical current by temperature difference of L$N_2$ and normal temperature. Like this, critical current could measure that degradation about 1~3％ by temperature difference. These results will amount the most important basis data in power electric machine of superconductivity cable, magnet, etc that winding work is require.

• Journal of the Korean Ceramic Society
• /
• v.35 no.10
• /
• pp.1094-1100
• /
• 1998

The thermal fatigue behavior of alumina ceramics was investigated by water quenching method. Single-quench thermal shock tests were performed to decide the critical thermal shock temperature difference ($\Delta$Tc) which was found to be 225$^{\circ}C$ Cyclic thermal shock fatigue tests were performed at temperature diff-erences of 175$^{\circ}C$, 187$^{\circ}C$ and 200$^{\circ}C$ respectively. After cyclic thermal shock fatigue test the distributions of retained strength and crack were observed. Retained strength was measured by four point bending method and crack observation method bydye penetration. In terms of the retained strength distribution the critical number of thermal shock cycles(Nc) were 7 for $\Delta$T=200$^{\circ}C$, 35 for $\Delta$T=187$^{\circ}C$ and 180for $\Delta$T=175$^{\circ}C$ respec-tively. In terms of the crack observation the critical number of thermal shock cycles were 5 for $\Delta$T==200$^{\circ}C$ 20 for $\Delta$T==187$^{\circ}C$ and 150 for $\Delta$T=175$^{\circ}C$ respectively. The difference of Nc investigated by two different methods is due to the formation of the longitudinal cracks which had no effect on the four point bending strength. Therefore the thermal fatigue behavior of alumina ceramics could be more accurately described by the crack observation method than the retained strength measurement method.

• The Journal of the Convergence on Culture Technology
• /
• v.2 no.2
• /
• pp.9-15
• /
• 2016

Objectives : The purpose of this study to investigate the Critical Thinking disposition in Nursing College students and related to ability of basic nursing science. Methods : Data were collected from 36 students who were students belong to one of province University. The instrument used in this study was California Critical Thinking Disposition Inventory(CCTDI) by Facione & Facione. The instrument was composed of 7 sub-items, truth-seeking, analyticity, systematicity, open-mindness, critical thinking, self-confidence, inquisitiveness, and maturity. The data were analyzed by descriptive statistics, t-test, ANOVA, Pearson Correlations with SPSS 12.0. Results : The result of this study were as follow; The average of total score in critical thinking disposition was 44.8, which means middle level(below 40: low, above 50: high level). Maturity was the highest while open-mindness was the lowest with an average score 5.01. There was significant difference between critical thinking and basic nursing science grade while there was no difference between age, gender, and religion. There was strongly relation between critical thinking disposition and basic nursing science(F=2.84, p=.01). Conclusion : According to the results of this study, nursing curriculum should be considered critical thinking disposition.

• Journal of the Korean Society for Heat Treatment
• /
• v.12 no.3
• /
• pp.206-214
• /
• 1999

The effect of cooling rate on carbide precipitation during quenching of austenitic manganese steel was investigated by optical microscopy, image analyzer and numerical analysis. A computer program based on the finite difference method for analyzing heat treatment processes was developed in order to evaluate cooling rates and the possibility of carbide precipitation during quenching. The area ratio of carbide precipitated in the austenite matrix was measured by the image analyzer, and used to determine the critical point of carbide precipitation. Temperature-dependent critical cooling rates at the critical points were calculated using the present simulation program, The calculated results showed a good agreement with the experimental ones.

• Journal of the Korean Society for Railway
• /
• v.3 no.1
• /
• pp.12-18
• /
• 2000

This paper addresses the experimental study on the nonlinear critical speed and the validity of simple prediction formulation. The experiment on nonlinear critical speed is carried out using roller rigs, which has been impossible on track because of a possibility of an accident. In addition, experiment for a bogie is performed to check the difference in modeling a full railway vehicle and a bogie. It is found that nonlinear critical speed proves to be an inherent phenomenon of a railway vehicle itself and the difference of test results between a full railway vehicle and a bogie is comparatively negligible. Finally. the accuracy of simple prediction formulation for outbreak velocity and response frequency in hunting is investigated.

• Journal of applied mathematics & informatics
• /
• v.36 no.5_6
• /
• pp.491-504
• /
• 2018

In this article, we consider a fourth order nonlinear difference system. By making use of the critical point theory, we obtain some new existence theorems of at least one periodic solution with minimal period. Our main approach used in this article is the variational technique and the Saddle Point Theorem.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.509-516
• /
• 2001

As the first step for the application of seismic landslide hazard maps to domestic cases, two types of hazard maps on Ul-joo from pseudostatic analysis and Newmark sliding block analysis are constructed and comllared. Arcview, the GIS program and the 1:5,000 digital maps of the test-site are used for the construction of hazard maps and tile parameters for the analyses are determined by seismic survey and laboratory tests. The results from the pseudostatic analysis have more conservative values of lower critical slope angles, although the results from the two different analyses have similar tendencies. In detail, with increasing the peak ground acceleration, the difference between the two analyses in the critical slope angle increases, while the difference decreases with increasing the maximum soil depth.

• Journal of Advanced Marine Engineering and Technology
• /
• v.20 no.5
• /
• pp.22-29
• /
• 1996

Flow characteristics of two-dimensional closed square cavities near unsteady critical Reynolds numbers were studied numerically at four Reynolds numbers : $8{\times}10^3,\;8.5{\times}10^3,\;9{\times}10^3\;and\;9.5{\times}10^3.$ A convection conservative difference scheme based upon SOLA to maintain the nearly 2nd-order spatial accuracy is adopted on irregular grid formation. Irregular grid number is $80{\times}80$ and its minimum size is about 1/400 of the cavity height(H) and its maximum is about 1/53 H. The result shows that the critical Reynolds number indicating the emergence of flow wnsteadiness is ranging from Re=$8{\times}10^3\;to\;8.5{\times}10^3$ and their flow patterns reveal periodic fluctuation during transient and fully developed stages. But macroscopic flow behavior in terms of instantaneous and time-mean characteristics represent remarkable difference.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.11 no.2
• /
• pp.222-231
• /
• 2005

Purpose: The purpose of this study was to identify the relationship between critical thinking disposition and clinical competency of nursing students. Method : The sample consisted of 151 nursing students, who have ever had clinical practice. Data were collected by self reporting questionnaire for 13 days from April 18-30, 2005. The data were analyzed by descriptive statistics, t-test, ANOVA, Duncan test, Pearson Correlation Coefficient with SPSS Programs. Result : The result of this study were as follows : 1. The total mean score of critical thinking dispositions in the nursing students was moderately(3.50). There was a statistically significant difference in critical thinking disposition according to satisfaction with the nursing major(F=5.563, p=.005). 2. The total mean score of clinical competency in the nursing students was slightly high(3.37). There was a statistically significant difference in clinical competency according to adaptation with the nursing major(F=5.202, p=.007), satisfaction with clinical practice(F=3.172, p=.045). 3. A significant positive correlation between critical thinking disposition and clinical competency was founded(r= .421, p<.000). Conclusion : In conclusion, this study revealed that critical thinking disposition influences clinical competence. Therefore, the finding of this study may provide significant basic data for nursing education and nursing practice.

• Current Research on Agriculture and Life Sciences
• /
• v.3
• /
• pp.44-54
• /
• 1985

In order to determine the critical head values of boiling and piping, several experiments were performed for 3 cases of model dykes on 7 kinds of pervious foundations. The results obtained are as follows : 1. It appears that the coarser and the denser the foundation material, the higher the critical heads of boiling and piping, and that the lower the permeability of the foundation, the higher the critical heads of boiling and piping. 2. A difference in head between the moments of boiling and piping is greater in the case 2 or case 3 than in the case 1 because of the additional hydraulic resistance. And it is found that the coarser the foundation material, the greater the head difference. 3. The critical heads of boiling and piping is directly prortional to the seepage length. 4. The piezometric heads close to the singular point are of the same magnitude, provided that the geometry of the model dyke and foundation material are the same. 5. Variations of the weight of model dyke can not affect the critical head. According to the conclusions shown above, the critical head of piping can be more practically predicted for prototype using the results from laboratory tests on scale model.