• Journal of the Korea Institute of Building Construction
• /
• v.22 no.6
• /
• pp.651-662
• /
• 2022

The electrochemical impedance spectroscopy(EIS) method was used to evaluate the concrete deterioration process related to chloride-induced steel corrosion with various corrosion levels(initiation, rust propagation and acceleration periods). The impressed current technique, with four total current levels of 0C, 13C, 65C and 130C, was used to accelerate steel corrosion in concrete cylinder samples with w/c ratio of 0.4, 0.5, and 0.6, immersed in a 0.5M NaCl solution. A series of EIS measurements was performed to monitor concrete deterioration during the accelerated corrosion test in this study. Some critical parameters of the equivalent circuit were obtained through the EIS analysis. It was observed that the charge transfer resistance(R_c) dropped sharply as the impressed current increased from 0C to 13C, indicating a value of approximately 10kΩcm². However, the sensitivity of R_c significantly decreased when the impressed current was further increased from 13C to 130C after corrosion of steel had been initiated. Meanwhile, the double-layer capacitance value(C_dl) linearly increased from 50×10^-6μF/cm² to 250×10^-6μF/cm² as the impressed current in creased from 0C to 130C. The results in this study showed that monitoring C_dl is an effective measurement parameter for evaluating the progress of internal concrete damages(de-bonding between steel and concrete, micro-cracks, and surface-breaking cracks) induced by steel corrosion. The findings of this study provide a fundamental basis for developing an embedded sensor and signal interpretation method for monitoring concrete deterioration due to steel corrosion at various corrosion levels.

• Journal of Powder Materials
• /
• v.20 no.2
• /
• pp.142-147
• /
• 2013

$YBa_2Cu_3O_{7-y}$ (Y123) powders for the fabrication of bulk superconductors were synthesized by the powder reaction method using $Y_2O_3$ (99.9% purity), $BaCO_3$ (99.75%) and CuO (99.9%) powders. The raw powders were weighed to the cation ratio of Y:Ba:Cu=1:2:3, mixed and calcined at $880^{\circ}C-930^{\circ}C$ in air with intermediate repeated crushing steps. It was found that the formation of Y123 powder was more sensitive to reaction temperature than reaction time. The calcined Y123 powder and a mixture of (Y123 + 0.25 mole $Y_2O_3$ + 1 wt.% $CeO_2$, $Y_{1.5}Ba_2Cu_3O_x$ (Y1.5)) were used as raw powders for the fabrication of poly-grain or single grain superconductors. The superconducting transition temperature ($T_{c,onset}$) of the sintered Y123 sample was 91 K and the transition width was as large as 11 K, whereas the $T_{c,onset}$ of the melt-grown Y1.5 sample was 90.5 K and the transition width was 3.5 K. The critical current density ($J_c$) at 77 K and 0 T of the sintered Y123 was 700 $A/cm^2$, whereas the $J_c$ of the top-seeded melt growth (TSMG) processed Y1.5 sample was $3.2{\times}10^4\;A/cm^2$. The magnetic flux density (H) at 77 K of the TSMG-processed Y123 and Y1.5 sample showed the 0.53 kG and 2.45 kG, respectively, which are 15% and 71% of the applied magnetic field of 3.5 kG. The high H value of the TSMG-processed Y1.5 sample is attributed to the formation of the larger superconducting grain with fine Y211 dispersion.

• Journal of the Korean Geographical Society
• /
• v.40 no.1 s.106
• /
• pp.27-46
• /
• 2005

Land suitability assessment(LSA) is a useful method to assess land characteristics according to its physical, locational, and environmental characteristics, and then to classify it into several categories based on its usability and the necessity for conservation. Therefore, the credibility of this assessment result depends on the rationality of assessment method such as computation of suitability values and the criteria of ranking the land grade. This study focused on identifying problems in current LSA method by critically reviewing it, and aimed to suggest a suitable method for the assessment of land suitability. As a alternative method in this study, linear transformation method was used for scoring factors instead of critical values and the weight for each assessment factor. and all values of those factors were added to produce comprehensive suitability values. Those values were ordered and categorizied with suitability level based on the ratio of square measure. After comparing existing LSA method to the suggested alternative method, it is concluded that the alternative method was more suitable to assess the characteristics of lands than existing LSA method. This method was also suitable to represent the characteristics of various assessment factors. Field survey using satellite image clearly revealed the suitability of the alternative method compared to an existing method of land assessment. Furthermore, the alternative method of grading the land suitability improves the problem of using standardiZiation method and gives more flexibility, which makes this method very rational.

• The KIPS Transactions:PartA
• /
• v.12A no.1 s.91
• /
• pp.41-52
• /
• 2005

Memory reference instruction caused by cache miss is the critical factor that limits the processing power of processor. Cache prefetching technique is an effective way to reduce the latency due to memory access. However, excessively aggressive prefetch leads to cache pollution and finally to cancel out the advantage of prefetch. In this study, an active prefetch filtering scheme is introduced which dynamically decides whether to commence prefetching after referring a filtering table to reduce the cache pollution due to unnecessary prefetches. For the precision filtering, an evicted address referencing scheme has been proposed where the filter directly compares the current prefetch address with previous unnecessary prefetch addresses stored in filtering table. Moreover, a small sized exclusive prefetch cache has been introduced to increase the amount of eviction of unnecessarily prefetched addresses to enhance the accuracy of dynamic filtering. The exclusive prefetch cache also prevents useful demand data from being pushed out by prefetched data, while the evicted address direct referencing scheme enables the prefetch cache to keep most of useful prefetch data within its small size. Experimental results from commonly used general and multimedia benchmarks show that the average cache miss ratio has been decreased by $13.3{\%}$ by virtue of enhanced filtering accuracy compared with conventional schemes.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.24-25
• /
• 2006

SmBCO coated conductors were successfully fabricated using EDDC (Evaporation using Drum in Dual Chambers) deposition system that is a bath type co-evaporation system for fabrication of superconducting tape and divided into two chambers named evaporation chamber and reaction chamber. To obtain long and high quality superconducting coated conductor, it is very important to secure the uniformity of all the deposition parameters m the deposition system such as deposition temperature, oxygen partial pressure, compositional ratios and so on. Therefore, we investigated the distribution of the parameters along the axis of the drum m EDDC on which tapes were wound helically. When the temperature on the middle point of deposition zone was $700^{\circ}C$, that on the edge of deposition zone was $675^{\circ}C$. When the thickness of SmBCO layer on the middle point of deposition zone was 1063 nm, that on the edge of deposition zone was 899 nm. The partial pressure of oxygen was 5 mTorr in the reaction chamber while that was $7{\times}10^{-5}$Torr in the evaporation chamber. The composition ratio of Sm:Ba:Cu, that was measured by EDX, was very uniform along the axis of the drum. Under these deposition conditions, critical current distribution along the drum axis was 175 A/cm, 190A/cm, 217.5 A/cm, 182.5 A/cm, 175 A/cm with the interval of 9 cm between samples. It means that the EDDC system has the potential of fabricating (100m, 200A) class coated conductor.

• Journal of Chest Surgery
• /
• v.53 no.3
• /
• pp.104-113
• /
• 2020

Background: Accurate intraoperative assessment of mediastinal lymph nodes is a critical aspect of lung cancer surgery. The efficacy and potential for upstaging implicit in these dissections must therefore be revisited in the current era of uniportal video-assisted thoracoscopic surgery (VATS). Methods: A retrospective study was conducted in which 544 patients with stage I (T1abc-T2a, N0, M0) primary lung cancer were analyzed. To assess risk factors for nodal upstaging and to limit any imbalance imposed by surgical choices, we constructed an inverse probability of treatment-weighted (IPTW) logistic regression model (in addition to non-weighted logistic models). We also evaluated risk factors for early locoregional recurrence using IPTW logistic regression analysis. Results: In the comparison of uniportal and multiportal VATS, the resected lymph node count (14.03±8.02 vs. 14.41±7.41, respectively; p=0.48) and rate of nodal upstaging (6.5% vs. 8.7%, respectively; p=0.51) appeared similar. Predictors of nodal upstaging included tumor size (odds ratio [OR], 1.74; 95% confidence interval [CI], 1.12-2.70), carcinoembryonic antigen level (OR, 1.11; 95% CI, 1.04-1.18), and histologically confirmed pleural invasion (OR, 3.97; 95% CI, 1.89-8.34). The risk factors for locoregional recurrence within 1 year were found to be number of resected N2 nodes, age, and nodal upstaging. Conclusion: Uniportal and multiportal VATS appear similar with regard to accuracy and thoroughness, showing no significant difference in the extent of nodal dissection.

• Proceedings of the Safety Management and Science Conference
• /
• 2011.04a
• /
• pp.731-746
• /
• 2011

The successful and sustainable growth of SMEs depends on their ability of strengthen their competitiveness in quality and cost and service more than anything else as a fundamental of operation. Among these key competitive factors of SMEs, quality is the most critical factor in manufacturing business fields. Because quality strongly influence cost and service performance on this manufacturing business field. There are many different ways to improve the quality performance but it needs proper management decision to choose the best way what can maximize outputs with minimum inputs. And it needs effective measurement methods and some indicators to analysis the quality performance properly. The quality cost is one of the simplest key indicators to measure the quality performance and the effectiveness of quality related management decisions. The major purpose of this study is to diagnose the categorized current level of actual quality cost of local SMEs to maximize their quality management effectiveness through comparing their level with others what's expressed in early studies. In this study, through survey on local SMEs, we found that their average annual quality cost ratio versus turnover - Total amount of annual quality cost divided by annual turnover - is around 3.69% excluded some SME's performances what have different quality control measures with others. And we found some results what corresponded with the early studies on the correlations between those categorized quality costs factors and some discrepancies between some of the literature model and the early case study results as follows. There were negative correlations between the Prevention costs and the External failure costs, and the Appraisal costs and the External failure costs, and there was positive correlation between the Appraisal costs and Internal failure costs same as early studies. But, we couldn't found any strong negative correlations between the Cost of control - Preventive costs & Appraisal costs - and the Cost of Failure of control - Internal & External failure costs -. It reveals not only the lack of effectiveness on their preventive or appraisal activities but also it can reveal there were so many effective ways to prevent the failure costs properly such as some innovative investment on Factory automation includes Error Proofing and more preventive actions to improve the effectiveness of the typical management methods likes CE (Concurrent Engineering), APQP (Advanced Product Quality Planning), FMEA (Failure Mode & Effect Analysis) etc.

• 대한공업교육학회지
• /
• v.31 no.2
• /
• pp.111-127
• /
• 2006

The purpose of this study is to analyze current recruiting examination and to categorize and construct test item that assess a variety of Mechanic Metal teachers in technical high school for appointing new Mechanic Metal teacher. The future developmental directions in this study are as follows: First, the examination for appointing secondary school new Mechanic Metal Teacher reflects the curriculum of the teacher education and technical high school, must be nomalize. Second, the rational readjustment of the basic necessary subjects for Machinery Metal recruiting examination is required. Third, the Mechanic Metal recruiting examination must prepare the criteria for the domain ratio of presenting problems and improve with level of presenting the question items which demands a knowledge, application and critical thinking. Fourth, in order to avoid the bias of the some subject tendency with committee making questions of different domain, more participation of a committee making questions is required. Fifth, the practical evaluation must be executed by the effective method to be able to make up for the limit of paper and pencil tests Sixth, as the long-term prospect to secure the professionalism of teacher, the recruiting examination of teachers must be carried out with the Machinery and Metal subject, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.241-241
• /
• 2007

We fabricated SmBCO coated conductors(CCs) on IBAD-MgO templates using co-evaporation method. IBAD-MgO templates consist of PLD-LMO/epi-MgO/IBAD-MgO/Ni-alloy and showed good in-plane texture of below FWHM 7 degree. Evaporation rates of Sm, Ba, and Cu were precisely controlled to get the optimum composition ratio after deposition process. To optimize the oxygen partial pressure of reaction region, wide range of the partial pressure was investigated from 1 mTorr to 15 mTorr. By reducing the oxygen partial pressure to 5mTorr, (103)grains in SmBCO layer have been increased. On the other hand, there were only (001)grains in SmBCO layer deposited at 15 mTorr $O_2$. Deposition temperature was also investigated from $600^{\circ}C\;to\;800^{\circ}C$ to make high Ic SmBCO CCs. SmBCO on IBAD MgO template showed that the Ic increased gradually at higher growth temperature to $800^{\circ}C$, which the highest Jc and Ic is $2.6\;MA/cm^2$ and 500 A/cm-w., respectively.

• Journal of the Korean Society of Radiology
• /
• v.13 no.5
• /
• pp.757-763
• /
• 2019

Recently, Following the recent development of flat panel detector with wide dynamic ranges, increasing numbers of healthcare providers have begun to use digital radiography. As a result, filter thickness standards should be reestablished, as current clinical practice requires the use of thicknesses recommended by the National Council on Radiation Protection and Measurements, which are based on information, acquired using conventional analog systems. Here we investigated the possibility of minimizing dose creep and optimizing patient dose using Al filters in digital radiography. The use of thicker Al filters resulted in a maximum 19.3% reduction in the entrance skin exposure dose when medical images with similar sharpness values were compared. However, resolution, which is a critical factor in imaging, had a significant change of 1.01 lp/mm. This change in resolution is thought to be due to the increased amount of scattered rays generated from the object due to the X-ray beam hardening effect. The increase in the number of scattered rays was verified using the scattering degradation factor. However, the FPD, which has recently been developed and is widely used in various areas, has greater response to radiation than analog devices and has a wide dynamic range. Therefore, the FPD is expected to maintain an appropriate level of resolution corresponding to the increase in the scattered-ray content ratio, which depends on filter thickness. Use of the FPD is also expected to minimize dose creep by reducing the exposure dose.