• 한국해안·해양공학회논문집
• /
• 제36권3호
• /
• pp.105-115
• /
• 2024

호안을 포함한 해안구조물의 설계 시 월파량 평가는 주로 수리모형실험에 의존하며, 이를 기반으로 월파량 예측을 위한 많은 경험식이 제안되었다. 일반적으로 월파방지를 위한 호안구조물의 경우 설계조위에 설계파의 최대 수면진폭을 고려하여 마루높이가 결정되므로 입사파고에 비해 상대적으로 높은 여유마루고를 갖는다. 그러나, 월파를 원천적으로 차단하기 위해서는 비경제적인 구조물의 마루높이가 요구되기 때문에 호안구조물의 설계 시 월파량을 허용 가능한 수준으로 제한하는 허용월파량의 개념을 도입하고 있다. 따라서, 실해역에서는 입사파고에 비해 상대적으로 낮은 여유마루고를 갖는 호안구조물들이 존재한다. 본 연구에서는 수리모형실험을 통해 상대적으로 낮은 여유마루고를 갖는 사석경사제의 월파량에 관해 검토하였다. 또한, 월파량의 실험결과를 이용하여 기존 월파량 산정을 위한 경험식의 예측성능을 상호 비교·분석하였다.

• 농업과학연구
• /
• 제12권2호
• /
• pp.282-291
• /
• 1985

점사(粘士)대신 화강암질풍화토(花崗岩質風化土)를 성토재료(盛土材料)로 사용(使用)할 경우(境遇) Fill Dam의 침하특성(沈下特性)을 구명(究明)하기 위하여 동재료(同材料)를 사용(使用)한 안동(安東)댐의 매설계기(埋設計器) 측정자료(測定資料)를 분석(分析)하여 얻은 결론(結論)을 요약(要約)하면 다음과 같다. 1. 시공중(施工中) Core zone의 침하(沈下)는 성토재하중(盛土載荷重)이 증가(增加)함에 따라 거의 직선적(直線的)인 증가현상(增加現象)을 보였으며 유효응력(有效應力)이 $7kg/cm^2$ 이하(以下)일 경우(境遇)의 침하율(沈下率)은 0.1~0.8% 범위(範圍)로 일반(一般) 점사(粘士)를 사용(便用)한 Fill Dam에서 보다 작은 값을 나타냈다. 2 하부(下部) Core zone의 침하(沈下)는 성토고(盛土高)의 약(約) 중심부(中心部) 이상(以上)에서 재구(載苟)되는 성토구중(盛土苟重)의 영향(影響)을 크게 받지 않는것으로 나타났다. 3. 간극수압(間隙水壓)은 투수계수(透水係數)가 클수록 저수지(貯水池) 상위(水位) 변화(變化)에 민감(敏感)한 반응(反應)을 보였으며 간극수압(間隙水壓)이 소산(消散)됨에 따라 침하(沈下)는 증가(增加)하는 경향(傾向)을 나타냈다. 4. 성토고(盛土高)의 하부(下部)에서 Zone 간(間)의 침하(沈下)는 상대밀도(相對密度)의 크기에 영향(影響)을 받는것으로 나타났으며 시공후(施工後)에는 압축(壓縮)두께가 큰 Core zone 에서 큰 경향(傾向)을 나타냈다. 5. 댐 정상(頂上)에서의 침하분포(沈下分布)는 댐의 최대단면(最大斷面)인 중심부(中心部)에서 크고 양안(兩岸)으로 갈수록 작게 나타났다.

• 대한치과보철학회지
• /
• 제47권2호
• /
• pp.240-246
• /
• 2009

연구목적: 이 연구는 측방접근법을 통해 상악동 골이식을 시행한 후 임플란트를 식립하였을 때, 누적 생존률 및 성별, 연령별, 이식재, 자가골의 공여부, 술전 잔존골 양, 무치악 형태, 식립 시기, 임플란트 종류, 직경과 길이에 따른 임플란트의 생존률 및 변연골의 방사선학적 결과의 차이를 분석하고자 시행되었다. 연구 재료 및 방법: 상악 구치에 측방접근법을 통해 상악동 골이식술 후 임플란트 보철치료를 시행한 71명을 대상으로 하였으며 표면 처리된 나사모양의 임플란트를 사용하였다. Osseotite(BIOMET 3i, Warsaw, USA), Neoplant(Neobiotec, Seoul, Korea), $Br\ddot{a}nemark$(Nobel Biocare, Goteberg, Sweden)과 SSII(Osstem, Busan, Korea)를 사용하였다. 최소 6개월 이상의 기간 관찰 누적 생존률은 Kaplan-Meier 분석법을 이용하였으며 다른 요소에 따른 임플란트의 생존률의 유의성은 Chi-square test로 검정하였다. 결과: 상악동골 이식술이 시행된 모든 증례에서 임플란트 식립이 가능한 골 양이 얻어졌으며 92%의 생존률을 보였다. 결론: 상악동 골이식술을 시행한 후 임플란트 보철 수복은 자가골 단독 사용시에 자가골과 골대체 물질이 혼합된 것보다 우수한 생존률을 보였다. 지연 식립하는 경우가 임플란트와 동시에 식립하는 경우보다 생존률이 높았다.

• Ocean and Polar Research
• /
• 제32권4호
• /
• pp.337-350
• /
• 2010

This study conducted sedimentological and geophysical surveys for 3 years (2006-2008) in southern Gyeonggi Bay, Korea to elucidate temporal changes in subaqueous dune morphology on a sand ridge trending northeast to southwest that has been excavated by marine sand mining. The sand ridge (~20 m in height, ~2 km in width and 3~4 km in length) has a steep slope on the NW side and a gentle slope on the SE side, creating an asymmetric profile. Large (10~100 m in length) and very large (>100 m in length) dunes occurring on the SE side of the ridge show a northeastward asymmetrical shape, whereas dunes on the NW side destroyed by marine sand mining display a southwestward asymmetry. The comparison between Flemming (1988)'s correlation and the height-length correlation of this study indicates that tidal current and availability of sand sediment are major controlling factors to the development and maintenance of dunes. Depth and sedimentary characteristics (grain size) are not likely to be major controlling factors, but indirectly influence dune growth by hydrological and sedimentary processes. The length and the height of dunes decrease toward the southeastern trough away from the crest of the ridge. These features result from the decrease of tidal current and sediment availability. The length and the height of dunes on the southeast side decrease gradually over time. This is a result of the interaction between tidal current and the decrease in sediment availability due to sediment extraction by marine sand mining. Marine sand mining has destroyed the dunes directly, causing irregular shapes of shorter length and lower height. The coarse fraction of suspended sediments is transported and deposited very close to the sand pit. By contrast, relatively fine sediments are transported by the tidal current and deposited over a wide range by the settling-lag effect, resulting in a decrease of sediment grain size in the area where suspended sediments are deposited. In addition, marine sand mining, decreases the height of dunes. Therefore, morphological and sedimentological characteristics of dunes around the sand pits will be significantly changed by future sand mining activities.

• Journal of Periodontal and Implant Science
• /
• 제36권2호
• /
• pp.345-359
• /
• 2006

Loss of maxillary molar teeth leads to rapid loss of crestal bone and inferior expansion of the maxillary sinus floor (secondary pneumatization). Rehabilitation of the site with osseointegrated dental implants often represents a clinical challenge because of the insufficient bone volume resulted from this phenomenon. Boyne & James proposed the classic procedure for maxillary sinus floor elevation entails preparation of a trap door including the Schneiderian membrane in the lateral sinus wall. Summers proposed another non-invasive method using a set of osteotome and the osteotome sinus floor elevation (OSFE) was proposed for implant sites with at least 5-6mm of bone between the alveolar crest and the maxillary sinus floor. The change of grafted material in maxillary sinus is important for implant survival and the evaluation of graft height after maxillary sinus floor elevation is composed of histologic evaluation and radiomorphometric evaluation. The aim of the present study was radiographically evaluate the graft height change after maxillary sinus floor elevation and the influence of the graft material type in height change and the bone remodeling of grafts in sinus. A total of 59 patients (28 in lateral approach and 31 in crestal approach) who underwent maxillary sinus floor elevation composed of lateral approach and crestal approach were radiographically followed for up to about 48 months. Change in sinusgraft height were calculated with respect to implant length (IL) and grafted sinus height(BL). It was evaluated the change of the graft height according to time, the influence of the approach technique (staged approach and simultaneous approach) in lateral approach to change of the graft height, and the influence of the type of graft materials to change of the graft height. Patients were divided into three class based on the height of the grafted sinus floor relative to the implant apex and evaluated the proportion change of that class (Class I, in which the grafted sinus floor was above the implant apex; Class II, in which the implant apex was level with the grafted sinus floor; and Class III, in which the grafted sinus floor was below the implant apex). And it was evaluated th bone remodeling in sinus during 12 months using SGRl(by $Br\ddot{a}gger$ et al). The result was like that; Sinus graft height decreased significantly in both lateral approach and crestal approach in first 12 months (p$MBCP^{TM}$ had minimum height loss. Class III and Class II was increased by time in both lateral and crestal approach and Class I was decreased by time. SGRI was increased statistically significantly from baseline to 3 months and 3 months(p<0.05) to 12 months(p$ICB^{(R)}$ single use, more reduction of sinusgraft height was appeared. Therefore we speculated that the mixture of graft materials is preferable as a reduction of graft materials. Increasing of the SGRI as time goes by explains the stability of implant, but additional histologic or computed tomographic study will be needed for accurate conclusion. From the radiographic evaluation, we come to know that placement of dental implant with sinus floor elevation is an effective procedure in atrophic maxillary reconstruction.

• Journal of Periodontal and Implant Science
• /
• 제41권6호
• /
• pp.273-278
• /
• 2011

Purpose: To analyze the dimensions of the embrasure space between the maxillary central incisors as potential factors influencing interdental papilla fill and height. Methods: The embrasure dimensions between the maxillary central incisors of 100 subjects (40 females/60 males) were assessed with clinical, study model, and radiographic examinations. Variables of the complete and deficient papilla fill groups were compared. Multiple regression analyses were performed to investigate potential influence of the distance between the contact point and bone crest (CP_BC), horizontal interdental distance (HID), and facio-lingual thickness (FLT) at the papilla base on complete/deficient papilla fill and papilla height (PH). Results: CP_BC was the only variable that showed a significant difference between the complete and deficient papilla groups (P<0.05). When the CP_BC was less than 5 mm, the embrasure spaces between the maxillary central incisors were completely filled with interdental papilla. Multiple regression analyses revealed that a significant predictor for complete/deficient papilla fill was CP_BC, and significant predictors for PH were CP_BC and HID (P<0.05). Conclusions: The chances of complete papilla fill increased as CP_BC decreased, while PH increased as CP_BC and HID increased. However, the FLT of the papilla base did not appear to affect papilla fill or PH. From an esthetic perspective, CP_BC as well as HID should be considered as factors influencing the topography of interdental papilla.

• 대한치과교정학회지
• /
• 제47권5호
• /
• pp.313-322
• /
• 2017

Objective: Miniscrew-assisted rapid palatal expansion (MARPE) is a means for expanding the basal bone without surgical intervention in young adults. Here, we assessed the differences in dental, alveolar, and skeletal measurements taken before (T0), immediately after (T1), and 1 year after (T2) MARPE. Methods: Twenty-four patients (mean age, 21.6 years) who had undergone MARPE and cone-beam computed tomography at T0, T1, and T2 were included. Changes in the following parameters were compared using paired t-tests: intercusp, interapex, alveolar, nasal floor, and nasal cavity widths; inclination of the first molar (M1) and its alveolus; and thickness and height of the alveolar bone. A linear mixed-effects model was used to determine variables that affected periodontal changes in the M1. Results: MARPE produced significant increases in most measurements during T0-T2, despite relapse of some measurements during T1-T2. The alveolar thickness decreased on the buccal side, but increased on the palatal side. The alveolar crest level at the first premolar moved apically. Changes in the thickness and height of the alveolar bone were affected by the corresponding initial values. Conclusions: MARPE can be used as an effective tool for correcting maxillomandibular transverse discrepancy, showing stable outcomes 1 year after expansion.

• Journal of Periodontal and Implant Science
• /
• 제42권1호
• /
• pp.20-24
• /
• 2012

Purpose: The purpose of this study was to evaluate the soft tissue and bone change around two adjacent implants in onestage implant surgery. Methods: Eleven subjects (7 males, 4 females) who were needed placement of 2 adjacent implants in the molar area were included. The two implants were placed with the platform at the level of the alveolar crest. The interproximal bone between the 2 implants was not covered with gingiva. After surgery, an alginate impression was taken to record the gingival shape and radiographs were taken to evaluate implant placement. Using a master cast, the gingival height was measured at baseline, 4 weeks, and 12 weeks. In the radiograph, the alveolar bone level was measured at the mesial and distal side of both implants at baseline and 12 weeks. Results: The exposed bone was covered with gingiva at both 4 and 12 weeks. Loss of alveolar bone around implants was found in all areas. The alveolar bone level in the exposed bone area did not differ from that in the non-exposed area. Conclusions: This study showed that the alveolar bone level and gingival height around 2 adjacent implants in the exposed bone area did not differ from that in unexposed bone area.

• Imaging Science in Dentistry
• /
• 제48권4호
• /
• pp.269-275
• /
• 2018

Purpose: The aim of this study was to evaluate the correlations between measurements made using panoramic radiography and cone-beam computed tomography (CBCT) based on certain anatomical landmarks of the jaws, with the goal of preventing complications due to inaccurate measurements in the pre-surgical planning phase of dental implant placement. Materials and Methods: A total of 56 individuals who underwent panoramic radiography and a CBCT evaluation before dental implant surgery were enrolled in the study. Measurements were performed to identify the shortest vertical distance between the alveolar crest and neighboring anatomical structures, including the maxillary sinus, nasal floor, mandibular canal, and foramen mentale. The differences between the measurements on panoramic radiography and CBCT images were statistically analyzed. Results: Statistically significant differences were observed between the measurements on panoramic radiography and CBCT for all anatomical structures (P<.05). The correlation coefficients (r) between the paired samples obtained from panoramic radiography and CBCT were closely correlated (P<.05), with r values varying from 0.921 and 0.979 for different anatomical regions. Conclusion: The results of this study support the idea that panoramic radiography might provide sufficient information on bone height for preoperative implant planning in routine cases or when CBCT is unavailable. However, an additional CBCT evaluation might be helpful in cases where a safety margin cannot be respected due to insufficient bone height.

• 한국지반신소재학회논문집
• /
• 제19권4호
• /
• pp.51-63
• /
• 2020

본 연구에서는 지진가속도 계측기의 계측 데이터를 사용하여 저수지의 동적해석방법에 대한 모형 검정 및 저수지 높이에 따른 지진가속도 증폭 특성을 분석하였다. 모형을 검정하기 위해 댐 기초의 계측 데이터를 입력 데이터로 사용하였고 해석 결과를 댐 상부의 계측 데이터와 비교한 결과 수치해석을 이용해 출력된 지진파와 계측 지진파의 최댓값과 그 파형이 비슷하게 나타났고 지진가속도 증폭 특성의 경우 지진가속도 증폭비는 저수지의 높이와 지진의 크기에 비례하는 것으로 나타났다. 본 연구를 통해 저수지에 설치된 가속도계에서 얻은 계측 데이터를 활용하여 반복 탄소성 구성식을 이용한 동적해석방법은 지진파 특성 분석이 적절하게 수행될 수 있는 기법임을 확인하였고 향후 이러한 기법을 적용해 저수지의 지진가속도 계측기의 활용도를 제고할 수 있을 것으로 판단된다.