• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.28-29
• /
• 2016

By Testing restrained shrinkage, it is possible to estimating the cracking tendency of concrete such as time to cracking, tensile stress and tensile creep. In this study, tensile creep properties of concrete under restraint shrinkage were investigation through comparison of specimens that JIS and AASHTO proposed. As a results, tensile creep strains in concrete ring specimens were 15% higher than those in uniaxial specimens.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.245-248
• /
• 2008

콘크리트 구조물은 콘크리트의 크리프와 건조수축 등의 영향으로 시간의존거동을 한다. 그리고 크리프와 건조수축의 불확실성은 매우 크다. 크리프의 불확실성을 줄이기 위해서 실험을 통하여 크리프 특성을 얻는 것이 필요하다. 연구실에서의 실험을 통한 결과를 얻더라도 환경 요인과 모델 자체의 불확실성 등에 의해서 실제 구조물에서는 크리프 특성이 다를 수 있다. 코드식이나 실험에 의해서 얻은 크리프 계수와 실제 구조물에서의 크리프 계수의 실제 물성 차이가 있다면, 구조물의 장기 거동을 적절히 예측하지 못하게 된다. 본 논문에서는 장기거동을 잘 예측하기 위해 시간에 따라 측정된 처짐으로부터 크리프 계수를 추정하였다. RC 빔 부재의 시간에 따른 처짐을 측정한 자료로부터 크리프 계수 민감도 해석을 이용하여 크리프 계수를 추정하고 ACI Committee 209와 CEB-FIP MC90에서 제시하는 크리프 모델에 따른 크리프 계수의 차이를 살펴보았다.

• 한국건설순환자원학회논문집
• /
• 제1권3호
• /
• pp.197-203
• /
• 2013

In this study, the creep behaviors of amorphous steel fiber-reinforced concrete were investigated. Two different types of tests were carried out to evaluate the effect of amorphous steel fibers on the creep of concrete: compressive creep test and tensile creep test. Fiber volume fractions used in the test were 0.2% and 0.4% for tensile specimens, and 0.2% and 0.3% for compressive specimens. Based on the test results, the addition of fiber volume fraction of 0.2% into concrete could significantly reduce both compressive and tensile creep.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.579-582
• /
• 1999

This paper represents the results of experiments designed to investigate the time-dependent response of concrete and steel tube in circular concrete-filled steel tubes, as are deployed extensively in high-rise building construction. The experiments were performed for creep of concrete and CFT column specimens with three loading cases. The creep coefficient and specific creep(unit creep) obtained from the test results were used for estimating and comparing the time-dependent response of each case. From these analyses, it is show that CFT-column has many merits for long-term behavior.

• 한국건축시공학회지
• /
• 제19권6호
• /
• pp.503-510
• /
• 2019

최근 RC 구조물의 건설기술에서는 콘크리트의 크리프에 대한 검토가 이루어져야 한다. 본 연구에서는 콘크리트의 크리프 예측 및 국내 건설현장의 크리프 결과에 영향을 미치는 요인을 검토했다. 크리프 테스트 기간이 길고 압축 강도가 높을수록 크리프 예측 정확도가 높아졌다. 경화 온도가 높을수록 콘크리트의 초기 강도가 높아지지만 크리프 계수의 차이는 시간이 지남에 따라 증가했다. 국내 건설현장 및 실험실에서의 크리프 평가 결과를 기반으로 ACI-209모델을 보완하는 수정 된 예측 모델을 제안했다. 일반~고강도 콘크리트를 사용한 실제 부재의 크리프 예측에서는 테스트 기간과 온도를 정확하게 고려해야한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.465-472
• /
• 2003

Creep Poisson's ratio reported by previous experimental studies on multiaxial creep of concrete was controversial. The Poisson's ratio is very sensitive to small experimental error that is inevitably induced, and the sensitivity may cause the controversy. It is difficulty to find out the properties on multiaxial creep of concrete. Therefore, a new approach method to analyze the test results is needed to precisely understand the properties on multiaxial creep of concrete. In this study, microplane model is used as a new approach method in analyzing the multiaxial creep test data. The six data sets extracted from the literature are fitted from regression analysis. Double-power law as a model representing volumetric and deviatoric creep evolutions on microplane is used, and six parameters in volumetric and deviatoric compliances are determined on the assumption that the volumetric and deviatoric creep strains are linearly proportional to corresponding stresses. The optimum fits give very accurate description of the test data. The Poisson's ratio calculated from the optimum fits varies with time and does not depends on the stress states, namely, uniaxial, biaxial, and triaxial stress states. Regression analysis is also performed on the assumption that the Poisson's ratio remains constant with titre. The constant Poisson's ratio can be use in practice without serious error.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.286-287
• /
• 2014

Performance degradation of Ultra High Strength Concrete occurs more than that of normal strength concrete at high temperature. Thus, strain of concrete subjected to high temperature and loading is one of the core assessment items for evaluating performance of structures. Therefore, in this study, creep of ultra high strength concrete subjected to various temperature conditions and 25%, 40% loading was evaluated. As the results, Creep strain increased with increase of temperature and loading. Creep strain of concrete at high temperature is influenced by loading.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.141-142
• /
• 2014

Decrease of performance degradation of High Strength Concrete occurs more than that of normal strength concrete at elevated temperature. Therefore, when it comes to evaluating performance of structures, strain of concrete subjected to elevated temperature and loading are important items. In this study, creep strain of High Strength Concrete sunjected to various temperature conditions and 33% loading was evaluated. As a result, creep strain increased with increase of temperature and loading. Creep strain of concrete at high temperature is influenced by loading.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.365-370
• /
• 1998

The creep strain of the compression zone of concrete beams subjected to cyclic loading should be a significant factor in increasing strain and deflections. An analytical model which is similar to a previous one is presented to predict the increase in cyclic creep strain and the damage using the properties of the constituent materials: concrete and steel. The analytical expressions are compared with our experimental data. The effect of concrete-creep is accounted by the term En, Icr,n, and Mcr,n. In this study, it is proved that cyclic creep exponents 'n' in Cyclic Creep Model, according to the parameters -strength, range of stress- have the various values. It is hoped that with the availability of more experimental data and better understanding of some of the complex behavior, the model could be further improved.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.309-312
• /
• 2003

Quasi-instanteneously performed creep loading is probably one way to seperate the viscous and the plastic creep from the elastic deformation. For mature concrete no differences seem to exist depending on whether the loading is rapidly applied or not. At early age the plastic deformations probably dominate the deformation. A series of test have been done to measure the quasi-instanteneous deformation in concrete specimens according to loading durations and concrete ages. The present study indicates that even very short-term loading contains creep deformation. As concrete is younger and load duration is longer, the proportion of creep deformation in quasi-instanteneous deformation is increased.