The main goal of this study is to prepare a program for analyzing High Strength Steel Fibrous Reinforced Concrete (HSSFRC) slabs and predict the response and strength of the slab instead of preparing a prototype and testing it in the laboratory. For this purpose, new equations are proposed to represent the material properties of High Strength Steel Fibrous Reinforced Concrete. The proposed equations obtained from performing regression analysis on many experimental results using statistical programs. The finite element method is adopted for non-linear analysis of the slabs. The eight-node "Serendipity element" (3 DoF) is chosen to represent the concrete. The layered approach is adopted for concrete elements and the steel reinforcement is represented by a smeared layer. The compression properties of the concrete are modeled by a work hardening plasticity approach and the yield condition is determined depending on the first two stress invariants. A tensile strength criterion is adopted in order to estimate the cracks propagation. many experimental results for testing slabs are compared with the numerical results of the present study and a good agreement is achieved regarding load-deflection curves and crack pattern. The response of the load deflection curve is slightly stiff at the beginning because the creep effect is not considered in this study and for assuming perfect bond between the steel reinforcement and the concrete, however, a great agreement is achieved between the ultimate load from the present study and experimental results. For the models of the tension stiffening and cracked shear modulus, the value of Bg and Bt (Where Bg and Bt are the curvature factor for the cracked shear modulus and tension stiffening models respectively) equal to 0.005 give good results compared with experimental result.
최근 연약지반에서는 공사기간 중에 압밀에 의한 침하량이 빠르게 일어날 수 있도록 압밀시간을 단축시키는 압밀촉진공법 중 하나인 PBD공법이 적용되고 있다. 이는 시공의 용이성과 경제성을 지닌 압밀촉진 공법 중 하나이다. PBD는 통수능력이 연약층의 두께에 비례하여 영향을 크게 받는 성질이 있으며, 배수재 타설 방법과 관련하여 배수재 타입 시 사용되는 맨드럴, 타입기기 및 방식에 의한 주변지반의 교란영향으로 배수성능이 저하되는 등 문제점이 있다. 또한 지반조건, 시공조건, 토질특성에 따라 통수능의 편차가 크게 나타나며 PBD타설 후 강우나 성토재료 수급의 불안정 등 기타 현장여건에 따라 성토 재하중을 바로 실시하지 못해 수개월 동안 방치에 따른 배수재 통수능의 문제점 및 분석이 미흡한 실정이다. 따라서 본 연구에서는 방치기간에 따른 PBD 통수능의 영향인자를 분석하기 위한 복합 통수능 시험을 실시하여 지반개량 및 통수능 평가를 하였다. 원통형 실린더에 배수재를 고정한 후에 교반한 시료를 투기한 후 0day, 30day, 60day, 90day 방치시킨 후에 가압장치를 사용하여 30, 70, 120kPa의 하중을 가해 실험을 수행하였다. 실험결과, PBD 타설 후 방치기간이 길어질수록 통수능이 감소하는 것을 확인할 수 있었다. 이는 장기간 방치에 따른 PBD필터의 흡습에 기인된 크리프 변형으로 통수단면의 감소가 원인이라고 판단할 수 있다.
포장(包裝) 용적(容積) 감소에 따른 수송비(輸送費) 절감(節減) 효과(效果)가 있어 조립시(組立式) 탁자류(卓子類) 가구(家具)의 제작(製作)에 널리 쓰이는 CBA(corner block with anchor bolt) 접합방식(接合方式)은 일정기간(一定期間) 사용(使用)함에 따라 접합부위(接合部位)가 약해지고 그 결과(結果) 구조(構造)가 불안정(不安定)하게 되는 반강접합(半剛接合)(semi-rigid joint) 특유(特有)의 결점(缺點)도 지니고 있다. 따라서 본(本) 연구(硏究)에서는 CBA 접합(接合) 강도(强度)에 영향하는 주요(主要) 설계(設計) 인자(因子)로서 side rail 규격, corner block의 side rail에의 부착시(時) 보강재(補强材)의 효과(效果) 및 corner block관통 anchor bolt의 사용(使用) 수(數) 그리고 corner block의 형태등(等)의 평가(評價)를 하기 위해 22개(個)의 접합군(接合群) 별(別)로 총(總) 88개(個)의 table section 시험체(試驗體)를 제작(製作)한 후(後)그들의 강성(剛性) 계수(係數)(Z - 값) 및 유효강도(有效强度)를 수평 하중(荷重)에 의한 변형측정(變形測定) 실험(實驗)을 통해 결정(決定)한 후 설계(設計) 인자별(因子別) 효과(效果)를 비교 분석(分析)하였다. 분석결과(分析結果), side rail의 높이 증대(增大) 및 corner block 부착시(時) PVAc 수지(樹脂)의 사용효과(使用效果)가 뚜렷하여 유효강도(有效强度)의 유의적(有意的) 향상(向上)을 나타냈고 anchor bolt의 효과(效果) 역시 2개 사용시(使用時)가 1개 사용시(使用時) 보다 훨씬 큰 것으로 나타났다. 또 side rail 높이 와 anchor bolt 사용(使用) 수(數)간에는 상호작용(相互作用) 효과(效果)도 있었다. 그러나 side rail의 두께 효과(效果)는 22mm에서 25mm로 증대(增大)시켰을때 뚜렷한 상승 경향(傾向)은 보여주지 못했다. 한편 corner block의 형태는 MDF를 주재료(主材料)로 사용(使用)한 탁자(卓子) 설계시(設計時)는 두께 25mm, 높이 100mm의 side rail에 PVAc 수지(樹脂)로 보강(補强)하고 mitered corner block에 2개(個)의 anchor bolt를 관통시킨 경우가 유효강도(有效强度) 3171.7 kgf-cm로 22개의 접태군(接台群)들 중 최대치(最大値)를 나타냄으로써 miter type이 rectangular type보다 바람직한 것으로 나타났다. 결론적(結論的)으로 자재(資材)의 효과적(效果的) 이용(利用)을 통한 생산비(生産費) 절감(節減)과 동시(同時)에 구조(構造)의 안정(安定)된 강도적(强度的) 측면(側面)을 고려할 때, 두께 22mm, 높이 75mm의 MDF side rail에 mitered corner block을 PVAc 수지(樹脂)와 나사못을 이용하여 부착한 후(後) 2개(個)의 anchor bolt를 관통시키는 방법(方法)을 가장 합리적(合理的)인 MDF 사용(使用) 조립시(組立式) 탁자(卓子) 설계(設計) 방안(方案)으로 제시(提示)하는 바이다.
본 연구에서는 복합형 지지방식으로 개발된 MC앵커에 대한 연구를 수행하였다. MC앵커는 선단 정착장치가 확장되어 천공된 공벽에 지압력이 발휘됨에 따라 인발력 증대와 그라우팅이 제대로 이루어지지 않을 경우에도 앵커체가 지반에서 탈락하지 않는 특성이 있다. 또한, 앵커강선과 더불어 보강철근을 삽입하여 인장손실을 감소시키는 동시에 시공성을 높이고 앵커강선의 손실이 발생하였을 때 네일의 역할을 기대할 수 있어 장기적인 안정성 향상을 꾀할 수 있다. 그러나, MC앵커와 같은 복합형 앵커는 마찰형 앵커와 지지구조가 다르기 때문에 지반과 그라우트의 마찰력에 의한 인발력 산정방식은 적합하지 않다. 특히, 국내의 경우에는 복합형 앵커에 대하여 지반특성을 고려한 설계법이 명확하게 정립되어 있지 않아 복합형 앵커의 인발력이 과소 또는 과대 평가되는 문제점이 있다. 따라서, 본 연구에서는 복합형 앵커의 일종인 MC앵커의 특성을 평가하기 위하여 강도변화가 심한 셰일지반을 대상으로 총 9개소에서 시험앵커를 시공하여 인발, 인장 및 장기변위를 측정하였다. 또한, 시험결과를 일반 마찰형 앵커의 경우와 비교, 분석하여 MC앵커의 거동 특성을 평가하였으며, 시험결과 셰일층에서 MC앵커는 일반 마찰형 앵커에 비해 인발력 증대효과를 확인할 수 있었다.
최근 국내에서도 원전 부지 내에 건설된 습식저장조의 용량이 곧 포화될 것으로 예상되어 사용후핵연료의 건식저장에 관한 논의가 활발하다. 이 논문에서는 앞으로 다양하게 논의될 저장시스템의 안전성과 함께 장기 건식저장 시 발생하는 사용후핵연료의 특성 및 건전성 변화에 대해 이제까지 국내외에서 연구 보고된 내용들을 면밀히 검토하고 향후 추구해야 할 연구방향을 제시하고자 하였다. 조사 결과 건식저장 기간 동안 진행될 수 있는 여러 피복관 열화기구 중에서 가장 대표적인 기구는 크립 변형과 수소화물에 의한 영향이었으며, 이들이 사용후핵연료 장기 건식저장 시 규제기술기준의 주요 근간을 이루고 있는 것으로 분석되었다. 한편 과거에는 피복관의 크립 변형이 가장 중요한 열화기구로 평가되었으나, 최근의 연구 결과를 통해 수소화물에 의한 영향이 더 심각한 것으로 드러났고 이는 미국의 규제기준과 새로운 온도 범위를 제시하고 있는 일본의 규제기준에서 확인할 수 있었다. 그러나, 아직까지 수소화물에 의한 영향이 발생하는 응력과 온도 조건을 명확히 규명할 수 있는 연구 자료가 충분하지 못하며, 나아가 사용후핵연료의 취급 시 거동에 대한 연구도 지속적으로 수행해야 할 부분으로 드러났다. 따라서 국내 사용후핵연료 특성에 맞는 건식저장조건을 수립하기 위해서는 국내에서도 본격적인 연구를 통해 이들 자료에 대한 충분한 생산과 평가 및 분석이 뒤따라야 할 것으로 판단된다.
Sevim, Baris;Altunisik, Ahmet C.;Bayraktar, Alemdar
Computers and Concrete
/
제14권5호
/
pp.599-612
/
2014
This paper presents the effects of the construction stages using time dependent material properties on the structural behaviour of concrete arch dams. For this purpose, a double curvature Type-5 arch dam suggested in "Arch Dams" symposium in England in 1968 is selected as a numerical example. Finite element models of Type-5 arch dam are modelled using SAP2000 program. Geometric nonlinearity is taken into consideration in the construction stage analysis using P-Delta plus large displacement criterion. In addition, the time dependent material strength variations and geometric variations are included in the analysis. Elasticity modulus, creep and shrinkage are computed for different stages of the construction process. In the construction stage analyses, a total of 64 construction stages are included. Each stage has generally $6000m^3$ concrete volume. Total duration is taken into account as 1280 days. Maximum total step and maximum iteration for each step are selected as 200 and 50, respectively. The structural behaviour of the arch dam at different construction stages has been examined. Two different finite element analyses cases are performed. In the first case, construction stages using time dependent material properties are considered. In the second case, only linear static analysis (not considered construction stages) is taken into account. Variation of the displacements and stresses are obtained from the both analyses. It is highlighted that construction stage analysis using time dependent material strength variations and geometric variations has an important effect on the structural behaviour of arch dams. The maximum longitudinal, transverse and vertical displacements obtained from construction stages and static analyses are 1.35 mm and 0 mm; -8.44 and 6.68 mm; -4.00 and -9.90 mm, respectively. In addition, vertical displacements increase from the base to crest of the dam for both analyses. The maximum S11, S22 and S33 stresses are obtained as 1.60MPa and 2.84MPa; 1.39MPa and 2.43MPa; 0.60MPa and 0.50MPa, respectively. The differences between maximum longitudinal, transverse, and vertical stresses obtained from construction stage and static analyses are 78%, 75%, and %17, respectively. On the other hand, there is averagely 12% difference between minimum stresses for all three directions.
Digital Radiography(DR)는 film/screen(F/S)과 비교하여 넓은 계조와 높은 Detective Quantum Efficiency(DQE), Modulation Transfer function(MTF)를 바탕으로 화질의 개선과 저 선량으로 검사가 가능할 것으로 예상됐지만 기대와는 다르게 과노출이 Signal to Noise Ratio(SNR)향상을 가져 오면서 환자 피폭선량의 증가를 가져오게 되었으며 이는 Dose Creep이라는 개념으로 설명 된다. DR에서의 선량 증가 이유는 F/S의 촬영에서 사용했던 관전압(kVp)을 고정 적용하여 Auto Exposure Control(AEC)를 사용하기 때문에 과노출을 유발 할 수 있다. 이에 본 논문은 DR에서 적합한 일반촬영 방법을 제안하고자 관전압이 대조도에 주는 영향, 관전류(mA)변화에 따른 MTF 측정, 머리 모형을 촬영한 영상의 Peak Signal to Noise Ratio(PSNR) 측정을 통해 정량적 평가를 시행 하였다. 그 결과 관전압에 의한 대조도 변화는 후보정 이후 개선이 가능하며, 관전류에 의한 MTF 측정 결과 50%영역은 1.41~1.39 lp/mm, 10% 영역은 3.19~2.8 lp/mm로 관전류 변화에 따른 초점크기 변화는 영상의 해상력에 영향을 주지 않는다. 영상의 PSNR측정 결과는 관전압과 관전류가 증가 하여도 90kVp를 제외하고 30dB 이상으로 시각에 의한 영상의 차이를 인지하기 어렵다. 실험결과를 바탕으로 디지털 일반촬영에서 관전압은 80kVp 이상 100kVp이하, 관전류는 선예도와 상관 관계가 없으므로 선량과 조사시간을 단축 시킬 수 있는 방향으로 사용하기를 제안한다.
전자기기부품에 적용되는 회로기판의 패키지 공정상에서 가해지는 온도변화에 따른 신뢰성 평가시 발생되는 문제들은, 주로 회로기판을 구성하고 있는 기본 재료들의 열팽창 계수 차이 및 시간의존성 물성에 의해 영향을 받는다. 특히, 인쇄회로기판 내부 회로층 사이에서 절연 역할을 수행하는 유리섬유강화 복합재료와 같은 수지몰딩 고분자 재료는 온도에 따른 물성변화 뿐만 아니라, 변형 및 하중이 가해지는 시간에 대한 물성변화도 고려해야 하는 점탄성 성질을 나타낸다. 본 논문에서는 인쇄회로기판에 사용되는 주요 고분자 재료인 유리섬유강화 복합재의 시간 및 온도에 따른 점탄성 특성을 규명하기 위하여, 단축인장 모드의 응력완화 시험과 크리프 시험을 각각 수행하였다. 또한, 고분자 재료 점탄성 물성의 영향성을 파악하기 위하여, 유한요소해석을 이용한 인쇄회로기판의 예비가열 공정 상에서 가해지는 온도변화에 따른 열변형을 평가하였다. 이러한 해석결과를 바탕으로, 인쇄회로기판과 같이 고분자재료를 사용하는 전자회로 구조물의 수치해석 기반의 열변형 예측시 점탄성 물성의 고려 필요성을 검증하였다.
산업폐기물 중 하나인 굴패각(Oyster Shell, OS)에 대한 건설재료로써의 활용성을 검토하기 위해 굴패각을 혼합한 콘크리트의 장기역학적 특성과 내구성을 실험적으로 평가하였다. 실험결과에 따르면 굴패각을 10% 대체한 콘크리트의 장기강도는 굴패각을 대체하지 않은 콘크리트와 유사한 결과를 보였으나, 굴패각을 20% 대체한 콘크리트의 장기강도는 감소하는 것을 보였다. 즉, 일정 한도 이상의 굴패각 대체는 콘크리트의 장기재령 강도에 열화요인으로 작용할 수 있는 것으로 나타났고, 굴패각의 대체에 따른 탄성계수 저하는 대체율에 거의 비례적으로 저하하였으며 굴패각의 대체율 20%에서 약 10∼15% 저하하였다. 굴패각의 대체율이 증가할수록 건조수축 발생량은 증가하였으며 기존의 건조수축과 크리프 모델식은 굴패각의 증가에 따른 영향을 잘 반영하지 못하였고 이에 대한 예측식의 보정이 필요하다. 잔골재의 일부를 굴패각으로 대체하여도 콘크리트의 동결융해 저항성, 탄산화 저항성, 및 화학침식 저항성에는 나쁜 영향을 미치지 않으며, 투수 저항성은 오히려 크게 개선되었다.
When constructing projects such as road embankments, bridge approaches, dikes or buildings on soft, compressible soils, significant settlements may occur due to the consolidation of these soils under the superimposed loads. The compressibility of the soil skeleton of a soft clay is influenced by such factors as structure and fabric, stress path, temperature and loading rate. Although it is possible to determine appropriate relations and the corresponding material parameters in the laboratory, it is well known that sample disturbance due to stress release, temperature change and moisture content change can have a profound effect on the compressibility of a clay. The early research of Tezaghi and Casagrande has had a lasting influence on our interpretation of consolidation data. The 24 hour, incremental load, oedometer test has become, more or less, the standard procedure for determining the one-dimensional, stress-strain behavior of clays. An important notion relates to the interpretation of the data is the ore-consolidation pressure ${\sigma}_p$, which is located approximately at the break in the slope on the curve. From a practical point of view, this pressure is usually viewed as corresponding to the maximum past effective stress supported by the soil. Researchers have shown, however, that the value of ${\sigma}_p$ depends on the test procedure. furthermore, owing to sampling disturbance, the results of the laboratory consolidation test must be corrected to better capture the in-situ compressibility characteristics. The corrections apply, strictly speaking, to soils where the relation between strain and effective stress is time independent. An important assumption in Terzaghi's one-dimensional theory of consolidation is that the soil skeleton behaves elastically. On the other hand, Buisman recognized that creep deformations in settlement analysis can be important. this has led to extensions to Terzaghi's theory by various investigators, including the applicant and coworkers. The main object of this study is to suggestion the modified compression index value to predict settlements by back calculating the $C_c$ from different numerical models, which are giving best prediction settlements for multi layers including very thick soft clay.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.