• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.10
• /
• pp.1155-1162
• /
• 2012

The purpose of this study is to investigate the effects of the bead shape on the crash performance of an aluminum crash box under a low-velocity impact condition. The initial peak load and impact energy absorption of a crash box with three types of bead shapes-edge concave, surface convex, and surface concave type-were studied through an FE analysis and an experiment. In addition, the effects of the bead shapes on the crash performance of the crash box were verified through a low-velocity-impact test with a front side member assembled with an aluminum crash box. The initial peak load of the surface-concave-type crash box was reduced by the bead, and therefore, deformation of the front side member at initial contact could be prevented. Furthermore, there was no deformation of the front side member after the impact test because the crash box with a surface-concave-type bead absorbed all the impact energy.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.6
• /
• pp.182-193
• /
• 2000

Several metrics have been used in crash discrimination algorithms in order to have timely air bag deployment during all frontal crash modes. However, it is still challengine to have timely air bag deployment especially during the oblique, the pole and the underride crash mode. Therefore, in this paper a new crash discrimination algorithm was proposed, using the absolute value of the deceleration change multiplied by the velocity change as a metric, and processing the metric as a function of the velocity change. The new algorithm was applied for all frontal crash modes of a minivan and a sports utility vehicle, and it resulted in timely air bag deployment for all frontal crash modes including the oblique, the pole and the underride crash mode. Moreover, it was proposed that an accelerometer be installed at each side of the rails, rockers or pillars to assess the crash severity of each side and to deploy the frontal air bags at different time especially during an asymmetric crash such as an oblique and an offset crash. As an example, the deceleration pulses measured at the left and right B-pillar·rocker locations were processed through the new algorithm, and faster time-to-fires were obtained for the air bag at the struck side for the air bag at the other side.

• International Journal of Automotive Technology
• /
• v.7 no.2
• /
• pp.179-185
• /
• 2006

Airbag deployment has been responsible for huge death, incidental injuries and broken bones due to low crash severity and wrong deployment decision. This misfortune has led the authorities and the industries to pursue uniquely designed airbags incorporating crash-sensing technologies. This paper provides a thorough discussion underlying crash sensing algorithm approaches for the subject matter. Unfortunately, most algorithms used for crash sensing still have some problems. They either deploy at low severity or fail to trigger the airbag on time. In this work, the crash-sensing algorithm is studied by analyzing the data obtained from the variables such as (i) change of velocity, (ii) speed of the vehicle and (iii) acceleration. The change of velocity is used to detect crash while speed of the vehicle provides relevant information for deployment decision. This paper also demonstrates crash severity with respect to the changing speed of the vehicle. Crash sensing simulations were carried out using Simulink, Stateflow, SimMechanics and Virtual Reality toolboxes. These toolboxes are also used to validate the results obtained from the simulated experiments of crash sensing, airbag deployment decision and its crash severity detection of the proposed system.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.2
• /
• pp.92-97
• /
• 2012

In the present the usage of bicycle has increased steeply due to well-being and convenient way of movement. In car to bicycle accident, the throw distance of bicycle is very important factor for estimating collision situation. In this study, simulations and collision tests in actual car to bicycle were executed for obtaining throw distance of bicycle. The simulations were executed by PC-CRASHTM s/w with vehicle of sedan type. Sand bags were used for the behavior of bicyclist instead of dummy and factors considered were vehicle velocity, the crashed angles and part of bicycle to vehicle, and bicycle was adult type. From the results, the throw distances of tire collision of 00 was longer than that of 450 tire crash, and the throw distances of 900 frame crash were longer than those of 450 frame crash. With based on actual crash tests and simulations, restitution coefficient of between vehicle and bicycle was estimated as 0.1. Finally the increaser vehicle velocity the longer the throw distances of bicycle and the simulation results were relatively good agreement to the results of experiment.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.1
• /
• pp.101-109
• /
• 2000

Occupant protection in the side impact of a car became one of the most important issues of car crashworthiness due to high injury level in a side impact crash. An accurate simulation of the side impact crash is an essential tool for the reduction of development time and cost for side impact safety system. This paper describes a new test methodology that can accurately generate the crash pulses of a vehicle and a door in a very cost-effective manner, and then evaluates the injury values of the dummy for the various sled pulses. This test methodology is simple and easy to approach because the door velocity is controlled by the hydraulic actuator and brake and the seat velocity is only adjusted by the friction force of the hydraulic brake. The superiority of the proposed test methodology is proven by the evaluation of dummy's injury values according to the change of the pressure of the hydraulic brake and by the application as a tool for the development of side airbag.

• Design & Manufacturing
• /
• v.14 no.4
• /
• pp.40-45
• /
• 2020

In a vehicle-to-vehicle accident, the impact posture, braking status, final stopping position, collision point and collision speed are important factors for accident reconstruction. In particular, the speed of collision is the most important issue. In this study, the collision speed and the final stopping position in the tunnel were estimated using PC-CRASH, a vehicle crash analysis program used for traffic accident analysis, and the final stopping position of the simulation and the final stopping position of the traffic accident report were compared. When the Pride speed was 0km/h or 30km/h and the Sorento speed was 100m/h, the simulation results and reports matched the final stopping positions and posture of the two vehicles. As a result of the simulation, it can be estimated that Pride was collided in an almost stationary state.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.259-260
• /
• 2012

• Journal of Power System Engineering
• /
• v.6 no.3
• /
• pp.42-48
• /
• 2002

Velocity change of crashed vehicle has been applied to assess the safety of passenger and degree of impact severity widely. In this study, 1 D crash analysis and 2 D crash analysis were performed for velocity change of crashed vehicle with HVE 2D, and factors used for these analysis are weight, C.G, roll resistance, stiffness and brake force which influence on velocity change of crashed vehicle. According to results, the velocity change of crashed vehicle was influenced by weight, center of gravity stiffness and brake force but not roll resistance.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.1
• /
• pp.106-111
• /
• 2012

Recently the usage of bicycle has increased steeply in Korea owing to traffic culture of well- being. In a car to bicycle accident investigation, the throw distance of bicycle is very important factor for reconstructing of the accident. The variables that influence on the throw distance of bicycle can be classified into the factors of vehicle and bicycle. Simulations and collision tests in actual car to bicycle accident were executed for obtaining throw distance of bicycle. The simulations were done by PC-$CRASH^{TM}$ and for actual crash tests sand bags were used for the behavior of bicyclist instead of dummy. Factors considered were vehicle velocity and the moving angles of bicycle, also the types of bicycle and vehicle were fairy cycle and automobile, respectively. From the results, the throw distances of a head-on tire collision of $0^{\circ}$ direction was longer than that of tire crash test of $45^{\circ}$ direction, and the throw distances of a head -on frame crash test of $90^{\circ}$ direction was longer than that of frame crash test of $45^{\circ}$ direction. In addition restitution coefficient between vehicle and bicycle was estimated as about 0.1 with based on actual crash tests. Finally the increaser vehicle velocity the longer the throw distances of bicycle, and the results of simulation were relatively good agreement to the experimental results.

• Journal of the Korean Society of Safety
• /
• v.33 no.5
• /
• pp.120-126
• /
• 2018

The traffic accident types are largely classified into vehicle to vehicle accident, vehicle-to-person accident and single-vehicle. Especially, the single-vehicle accident types are severe when the vehicle crashed into road facilities such as bridge, piers, utility poles. The severity of single-vehicle accidents are ten times higher than that of all other accidents types. It is needed to consider to reduce accident severity. This study was conducted to develop crash worthy safety design facility to ensure the vehicle occupant safety. The simulation and the crash tests were conducted for assessment of the safety performance to check the criteria of CC2(Crash Cushion 2) level. THIV(Theoretical Head Impact Velocity) and PHD(Post-impact Head Deceleration) were used to assess occupant impact severity for crashes. The non-redirection collision test conditions for 900 kg and 1,300 kg-head on crash tests, 900 kg-1/4 offset crash tests, 1,300 kg-head on crash test with $15^{\circ}$angle were conducted. The simulation and experiment test result showed that THIV values were below 44 km/h criterion, PHD values were below the 20G. The development non-redirective crash cushion is expected to be used for the fixed object such as bridge piers for assuring occupant safety.